How I can add apple logo while updating status on Facebook via my iPhone 4 iOS 5.. I use facebook via Facebook app for iphone
Help me out.. Plzzz
have you seen anyone with the apple logo on facebook recently? i'm asking because a simple google search will tell you that facebook is the one blocked the apple logo, or the 'posted from iphone' from showing up. now you've got me wondering.
Similar Messages
-
Ipod touch 4 stuck on a blinking apple logo while updating to iOS 6.1.3
The update had already downloaded on my device. However when it was installing it went into a loop of blinking apple logo. Is the install happenng or is it just stuck. How to fix this. Pl help.
If not successful try the remaining steps of the following:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone 5 Updating Status on Facebook App crash
Does anyone using iPhone 5 experience Facebook crashing after updating status on the Facebook app? I have FB integration on and this always happens after i update my status under News Feed. ANYONE???
have you seen anyone with the apple logo on facebook recently? i'm asking because a simple google search will tell you that facebook is the one blocked the apple logo, or the 'posted from iphone' from showing up. now you've got me wondering.
-
My iPhone 3GS is stocked on apple logo while restarting my iphone. Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..
I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has never been hacked or jailbroken. We and a few others are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are not having the same hardware issue all of a sudden at the same time.
-
I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?
Your WiFi/Bluetooth chip has failed. Bring the phone (and $199 if outside the warranty period) to Apple for replaceement.
-
How i can have more than one update center? e.g netbeans update center
Hi
Thank you for reading
How i can add Netbeans update center to my update center list ?
I want to use some netbeans 4.1 plugins
which Creator 2 EA 2 is based on it
Can some one help me ?Hi,
Although it is based on NetBeans, Creator does not officially support the addition of 3rd party modules, at least not yet. Hence there is no facility for adding another update center to the IDE. That said, there is nothing in Creator that prevents a user from writing and installing such a module. How well it performs depends on what the module does and how it interacts with the rest of the IDE.
Thanks,
RK. -
HT1688 Activation server can not be reached while updating my iPhone software.
Why is my phone not activating the new 7 software on an iphone 4s.
Here is part of the message I have beengetting...
Activation server can not be reached while updating my iPhone software.Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
http://support.apple.com/kb/ts3424 -
My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?
You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above. -
How i can add music from my computer to my i5c
how i can add music from my computer to my i5c
Use iTunes on your computer to sync music to your iPhone.
See: http://support.apple.com/kb/ht1386 -
Apple tv freezes at apple logo while booting
My apple tv was working pretty well, then I unplugged it ti connect my iPad via Hdmi and when I back to connect my apple tv it freezes at apple logo while booting it can stay like that for hours
I don't even know if this will work...buy a USB to micro USB cable and connect the AppleTV to your computer and try doing a firmware restore. Here are the instructions from the manual:
If Apple TV still doesn’t respond:
Disconnect the power and HDMI cables from Apple TV.
Connect one end of a micro USB cable (sold separately) to the back of Apple TV, and the other end to your computer.
Open iTunes on your computer, select Apple TV in the Source list, and then click Restore.
The problem is, I don't know if your computer will be able to talk to the AppleTV if it can't even boot. So this procedure may not work. Good luck! -
HI, I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.
What are you missing?
I inherited this app and signing the third party jars is how it was setup, I was wondering the same thing too, why was it necessary to sign the third party jars?
The applet runs in either JRE 1.6.0_13 or JRE 1.6.0_27 depending on the other Java apps the user uses. JRE 1.6.0_13 does not have the mixed code security (so it is like is disable), but JRE 1.6.0_27 does have the mixed code security and the applet will not launch with mixed code security enable, so we have to disable it. With all the hacking going on in the last two years, is important to improve security; so this is a must.
Yes, I always clear up the cache.
Any idea on how to resolve this problem? -
How we can add custom field in standard report 2kee.
Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
RaviRavi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM -
I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?
You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck! -
When sending an email I used to be able to click on a distribution list in my contacts and it would add all the email addresses, I now have to add each email address individually and this takes a lot of time. Could someone tell me how I can add a distibution list/group to my emails?
Barney,
I have four groups.
I just typed the name of one of those groups in the To field on the iPhone's email, and received:
Invalid Address
"<group name>" does not appear to be a valid email address. Do you want to send it anyway?
I clicked continue and it remains in my outbox.
Help is appreciated.
Thanks,
Michael -
How to skip the Inbound Delivery while updating LA confirmations via EDI
Hi Experts,
I have a requirement wherein I dont want to create Inbound Delivery automatically when updating the LA (or a copied Conf Cat of LA) confirmation via EDI. When we are using the message type DESADV, LA confirmations are being updated, but simultaneously, the Inbound delivery also being created. My client desires that Inbound Delivery should not happen and only LA confirmation should be updated via EDI.
Is there anyway, by which we can skip the Inbound Delivery while updating the LA confirmations in the PO?
Thanks in advance
Regards
Radha KrishnaHi Prabhaharan,
Thanks for your quick response.
My requirement is to have both AB and LA confirmations. I have included these two in a new the conf control So, your suggestion will not work.
Is there any other way out to fulfill my requirement?
Thanks & Regards
Radha Krishna
Maybe you are looking for
-
Not receiving Critical Patch Update E-mail Notification Alerts - used to
I am no longer receiving the Security Alert Email Notifications for the Oracle Critical Patch Updates. Also, the instructions on the OTN web page are no longer valid (no longer a Opt-In category). I have the box checked to receive the emails, but for
-
HT4623 iPhone doesn't switch to horizontal view when turned.
My phone remains in the standard vertical view mode and even when turned never switches to horizontal view.
-
Adding another application to adobe air installer
Hi, i created an application with adobe air myApp.air and i want to add a driver file in this installer so when the user installing the air application it will also install the needing drivers (it is an application also for windows and mac). is it po
-
My original laptop that I started my Itunes library with was stolen last summer. I have a new laptop now and would like to go back to my old library and see all my old music. How can I do that?
-
Crash while in illustrator when printing
Upgraded to OS 10.9. When attempting to print old and / or new created Illustrator C3 files, system crashes. I do not have the funds to upgrade my Cloud software. What else can I do?