How i can configer my exchange server email box on mail ?
i have user name and password and domain name how i can use mail to setup my email box at exchange server ?
The Exchange Administrator for your account must enable the Exchange Server for IMAP account access. Do you know if the admin has done so?
I would also search Mail Help with the word - exchange.
Similar Messages
-
How do you read MS Exchange Server email
I am trying to develop a server side LabVIEW email action application that will use subject line of generated client emails, sent to a specific account, too perform an 'action' based on the structured commands of the email subject line.
As this application is residing and running on a server I wish to advioid the use of connectivity through another application (like outlook).
The wish is to directly read and manipulate emails from, to and on the MS exchange server.
I'm Seeking advice on the best and most robust method in programming a LabVIEW access routine for MS exchange email service ?
I have already experimented with Pop3 using the TCP/IP and webdav but have experienced limitations in my pursuit of using these connectivity methods.
thanking you in advance for your time and advice
GregThanking you for your response
whilst i have been looking at the MSDN web site and others, i was interested in the experiences of others to direct me in how to tackle this problem to create a reliable and robut product with the manipulation capabilities of emails neccessary to my project.
ie read and process an email
- read email (sender, subject and body)
-get a count of new recieved emails
- after processing either mark as read or shift to a processed folder in web exchange
- if action email fails to process shif to error folder on the exchange
- if unrecognised format or sender shift to junk folder
- send acknowledgement email on successful processing
Corey thnking you and looking forward to your oher posts and ideas -
Can't eprint from exchange server email address
I am unable to eprint from my exchange server email address and I can print from other accounts such as @att.net aacounts. This problem has started in the last week. I have reinstalled the printer and varified the allowed address.
Any ideas?Hi Rick60422,
Welcome to the HP Support forums. I gather that in the last week or so you have been unable to print emails from your exchanger server email address.
I have included a document here that has trouble shooting steps to take when an ePrint job fails.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox
Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
ChrisHi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support -
if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?
thanks for your reply!
what's protection software can use for exchange server 2013?
Hi,
Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
Martina Miskovic -
How we can sent the payslip through email
Dear Guru
We are implementing SAP Payroll, We are under testing phase
Can any body suggest how we can send payslip through assigned email ID
Pl suggest the same
We are in ECC 6.0 ehp 4
Regards
Santoshhi
Payslip to be sent as email - pdf attachment
please check he above link , might be useful.
Regards
sameer -
How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"
THANKS! this worked !!!
I hit "DELETE THIS ACCOUNT" on my iphone (this is the Yahoo I tried to set up by "picking" it from the list that the iphone5 gives you) and then confirmed to delete everything.
THEN: while in Mail (still in the Settings Section) I tapped on "ADD ACCOUNT..." but this time tapped on "OTHER" and manually put in my yahoo ID and password and I did not even have to go to the SMTP or IMAP incomming/outgoing stuff at all. But I checked it out under the "ADVANCE" tab and it was already correct for yahoo. (ALMOST SEEMED TOO EASY)
Went to my home screen and tapped on MAIL and my yahoo email loaded up just right!
Now, I have no idea if I have any other issues like if I delete mail on the iphone; does it delete properly on my ipad...etc..etc. but one problem at a time is getting fixed. THANKS! -
Delay downloading Exchange server email
I use an iMac with an ethernet link to cable internet service. Using Mail, I have a strange delay of 1-2 minutes before email downloads from an Exchange server. Interestingly, my MacBook, also using Mail, downloads the same Exchange server email almost instantly using an Airport Extreme with the same cable modem providing the cable signal.
In fact, I just switched from a 2007 iMac to a 2010 iMac, used Migration Assistant to transfer everything from the 2007 to the 2010 iMac, and I have the same delay of about 1-2 minutes before email downloads from the Exchange server.
The email always downloads--it's the delay on the iMac that's puzzling.It's hard to say based on what you posted. I would guess that the VPN connection doesn't provide the complete name resolution you get when connected to the network internally.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How I can get all my computer email contact in my IPad?And how I can sync my IPad to my computer ??, How I can get all my computer email contact in my IPad?And how I can sync my IPad to my computer ??
You should be able to:
Disable automatic syncing of devices (Edit > Preferences > Devices)
Backup the device to the new installation (Right-click device > Back Up)
Transfer your purchases into your authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in the apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2 -
How do you set-up a hotmail email address in mail
how do you set-up a hotmail email address in mail?
I cant seem to add it. any ideas why it cant connect to the server? what server address should i be using?
regards
BrendonHi bmuur,
I also had the same problem.
I clicked Microsoft Exchange and kept trying to add my hotmail account that way but it kept asking for a server address for it to work.
If you go into Internet Accounts and instead of clicking Microsoft Exchange scroll down to the bottom of the list and click Add Other Account...
It will ask what sort of account you want to be created and I selected Add Mail Account and clicked create.
Enter your full name, hotmail email address and password.
I then clicked create and it worked for me.
Hopefully this solves your problem. -
Exchange Server 2008 and Apple Mail App
My place of employment recently hired a 3rd party company to handle setting up and managing our servers. This includes our email, which is now run on Microsoft Exchange Server 2008.
I am the only user in the office that uses Macs, and we are having an impossible time of figuring out what could be wrong that Apple Mail is not letting us connect to the Exchange server to receive/send email. We can ping the Exchange server just fine from Terminal.
Does anyone have any experience with this? Anyone know of work-arounds? I'm using 10.4.11 at the moment. Mail is version 2.1.3.
I read all the other Exchange-related topics in here and none were able to help me.
Thank you!
Message was edited by: JTelcontar (typo!)Well that's bizarre, since I have the opposite problem. I can connect to the Exchange Server using Entourage 2004 no problem. However I do not use the Outlook http:// type access, I simply typed in the Exchange server address something like SEBNN-EX002. Then Entourage went off and established all the connections et voila.!
But there are issues however. Entourage could not connect to the address server, so I think that's an LLDP problem but I'm not too bothered about that. Also I think some of the Calender implementations have a few bugs. For example, you can't drag-and-drop a mail item onto the calender icon to create an event, you have to right-click and use the built-in scripts to do it. Also, inviting attendees to a meeting is a bit hit/miss.
I would actually like to use Apple Mail instead, but have never been able to configure it to run - it always gets the "cannot connect to exchange server" error. An y advice would be welcome. -
Can't receive my AOL emails through mac mail 5.1
I just upgraded to Lion and now I can't receive my AOL emails through mac mail 5.1. I can send email fine though the AOL account and all my other email accounts are fine. Any suggestions on how to fix this?
Look to right of this page, "More Like This."
https://discussions.apple.com/message/3205403#3205403 -
I can't received security info email to my mail
i Forgot my security answers
i send many time to reset security info to my verified email
i can't received security info email to my mail
cant help me plsYou need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(96914) -
Why can't I print some emails in Apple Mail?
Why can't I print some emails in Apple Mail?
Hello paulette238,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Have a nice day,
Mario -
I can't pull up my email from the mail icon. Can anyone help me?
I can't pull up my email from the mail icon. I have a yahoo account and Mountain Lion.
Thank you for any help.Here are the settings I used for Yahoo Imap.
IN
OUT
Maybe you are looking for
-
8.1.2. crashes every time I try to open a pdf
Since upgrading to 8.1.2 automatically, I try to open a fax sent by my internet fax service, and it crashes every time. Error: instruction at 0x2d830cbc ...memory cannot be read. I thought it might be something to do with that particular fax, so I tr
-
System error message while using maps check in
today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application
-
Oracle 8.1.7.4 / Redhat 7.3 : tablespace creation never ends
Hi, We're running Oracle 8.1.7.4 on Redhat 7.3. System memory is 256 MB (2x128). After increasing memory to 1Go (2x512) we're facing a strange problem. Tablespaces re-creation hangs, we first drop and then create tablespaces reusing datafiles : DROP
-
To run Apple TV on more that one TV do I need to buy another Apple TV device?
?
-
Display next result in a recordset
Hi everyone, I'm building an ASP page (working with MS Access and DWCS3) and want to use the top three results from a query as dynamic elements of my page but I need to be able to work with the 1st, 2nd and 3rd items in the recordset separately. The