How i can define network printer to report that can use it

hi all
i want to define network printer to the report
and the format of the printer full name and its port ?
another question
when i use the local printer it print but there are web opened and contain uncertain
letters
i want this web to be closed

Hi John
Thanks for replying,
My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
I was hoping to wirelessly connect.
The wish is that all my devices can print wirelessly
What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
Any other advice
Thanks
Regards

Similar Messages

  • Can anyone tell me how to install a network printer driver without having the network printer online?

    Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
    the driver? This is the point of my question!
    I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

    DP
    The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
    Wanikiya and Dyami--Team Zigzag

  • How to install a network print on solaris 10

    How to install a network print on solaris 10?
    Thank You!

    Thank you Zettabyte!!
    Folks, network printers should NOT BE configured like this:
    lpadmin -p somequeue -s someprinter
    that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
    Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
    You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
    The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

  • How we can use call transaction xd03 in alv report

    hey guys i want now that how we can use call transaction xd03 in alv report by using various tables in report or coding.
    can you tell me about that by the way of coding so that it can be easy for me to understand and help ful to make report by using alv report with many tables. so please send me .
    Moderator message: it seems to be XD03 day today, please search for available information/documentation/previous discussions.
    Edited by: Thomas Zloch on Nov 25, 2011 1:24 PM

    Where?
    Max

  • Unable to print crystal report over web using ActiveX Control

    Post Author: jimmyp
    CA Forum: General
    We have a problem with printing crystal report over web using ActiveX Control.  When clicking print button, it only shows a blank dialog web crystal viewer page without any error.  The page just simply hangs.  We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE.  It still does not print.  Does anyone know why?  
    Environment.
    Bundle Crystal Report v10
    Asp.net 2.0
    IE 6.0 or higher.
    Appreciate for your help.
    Jimmy

    Post Author: Ian Kulmatycki
    CA Forum: General
    A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
    -ian
    When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
    "A communication error occurred, printing will be stopped."
    How can this error message be resolved?
    Resolution
    This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
    This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
    Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
    Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
    For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
    ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
    This issue is addressed in the following components (and later versions):
    PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
    ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
    WebReporting.dll, version 10.0.5.785, dated 8/25/2004

  • Physically printing a report from Apex using BI Publisher

    Hi,
    I know it is possible to generate and download a PDF (or any other format) in Apex using BI Publisher (Apex 4.0.2)
    But is it possible to physically PRINT a report in a specified printer? For example, the user clicks a button and the report comes out of the printer just like that.
    Note: I am NOT after a solution where the report is firstly displayed on the screen and then the user performs some action to print it from there (that is pretty easy to do.)
    I know that BI Publisher can do it, as its web service has an option to do so.
    Thanks
    Luis

    Hi Luis,
    not sure this is possible.
    Only SOME of the features of BI Publisher are used from APEX as a service to create the reports.
    *) I am not aware of any parameters / attributes in APEX so that you could specify a printer directly
    *) It is not part of the API you could use instead manually:
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDGFADB
    I have just recently implemented that myself for an integration with JasperReports. It is currently in beta test:
    http://daust.blogspot.de/2012/08/jasperreportsintegration-200-beta-test.html
    Thus your options are:
    *) I am not sure that BI publisher allows that but perhaps you could first call the apex utility function apex_util.get_print_document to retrieve the blob from bi publisher. Then perhaps (if allowed) send the blob again by yourself and using the print features of bi publisher.
    Here you would have to write the utl_http communication yourself.
    *) If bi publisher doesn't allow the separate process (generation first and then sending it to a printer) then you would also have to write a j2ee application which does that.
    *) another option could be to store the generated blob in the filesystem on the database and call a shell script from within the database. This shell script would send it to the network printer.
    Hope that helps,
    ~Dietmar.

  • Hi guru's how we can use oops in ALV & why can u explain to me plz

    hi guru's how we can use oops in ALV & why can u explain to me plz

    hi, chk these links and also the sample programs below for clear idea on ALV_OOPS:
    Check this for basic concepts of OOPS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
    Tabstrip
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
    Editable ALV
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
    Tree
    http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
    General Tutorial for OOPS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
    http://www.sapdevelopment.co.uk/reporting/alvhome.htm
    http://www.sap-img.com/abap/what-is-alv-programming.htm
    http://www.sap-img.com/abap-function.htm
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
    http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
    http://www.sap-img.com/abap-function.htm
    Classical ALV:
    http://www.geocities.com/mpioud/Abap_programs.html
    OOPS ALV:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
    *"Table declarations...................................................
    TABLES:
    EKKO, " Purchasing Document Header
    CDHDR, " Change document header
    SSCRFIELDS. " Fields on selection screens
    *"Selection screen elements............................................
    SELECT-OPTIONS:
    S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
    S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
    S_EKGRP FOR EKKO-EKGRP, " Purchasing group
    S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
    S_UDATE FOR CDHDR-UDATE. " Creation date of the change
    " document
    *" Data declarations...................................................
    Field String to hold Purchase Document Number *
    DATA:
    BEGIN OF FS_EBELN,
    EBELN(90) TYPE C, " Purchase Document Number
    ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
    " the Object
    LIFNR TYPE EKKO-LIFNR, " Vendor's account number
    EKGRP TYPE EKKO-EKGRP, " Purchasing group
    BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
    END OF FS_EBELN,
    Field String to hold Purchase Document Header *
    BEGIN OF FS_EKKO,
    EBELN TYPE EKKO-EBELN, " Purchasing Document Number
    ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
    " Object
    LIFNR TYPE EKKO-LIFNR, " Vendor's account number
    EKGRP TYPE EKKO-EKGRP, " Purchasing group
    BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
    END OF FS_EKKO,
    Field String to hold Account Number and name of the Vendor *
    BEGIN OF FS_LFA1,
    LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
    NAME1 TYPE LFA1-NAME1, " Name1
    END OF FS_LFA1,
    Field String to hold Change date and the name of the user *
    BEGIN OF FS_CDHDR,
    OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
    OBJECTID TYPE CDHDR-OBJECTID, " Object value
    CHANGENR TYPE CDHDR-CHANGENR, " Document change number
    USERNAME TYPE CDHDR-USERNAME, " User name
    UDATE TYPE CDHDR-UDATE, " Creation date of the change
    " document
    END OF FS_CDHDR,
    Field String to hold Change document items *
    BEGIN OF FS_CDPOS,
    OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
    OBJECTID(10) TYPE C, " Object Value
    CHANGENR TYPE CDPOS-CHANGENR, " Document change number
    TABNAME TYPE CDPOS-TABNAME, " Table Name
    FNAME TYPE CDPOS-FNAME, " Field Name
    VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
    VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
    END OF FS_CDPOS,
    Field String to hold Date Element Name *
    BEGIN OF FS_DATAELE,
    TABNAME TYPE DD03L-TABNAME, " Table Name
    FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
    ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
    END OF FS_DATAELE,
    Field String to hold Short Text of the Date Element *
    BEGIN OF FS_TEXT,
    ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
    DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
    " Repository Objects
    END OF FS_TEXT,
    Field String to hold data to be displayed on the ALV grid *
    BEGIN OF FS_OUTTAB,
    EBELN TYPE EKKO-EBELN, " Purchasing Document Number
    ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
    " Object
    LIFNR TYPE EKKO-LIFNR, " Vendor's account number
    EKGRP TYPE EKKO-EKGRP, " Purchasing group
    BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
    WERKS TYPE LFA1-WERKS, " Plant
    NAME1 TYPE LFA1-NAME1, " Name1
    USERNAME TYPE CDHDR-USERNAME, " User name
    UDATE TYPE CDHDR-UDATE, " Creation date of the change
    " document
    DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
    " Repository Objects
    VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
    VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
    END OF FS_OUTTAB,
    Internal table to hold Purchase Document Number *
    T_EBELN LIKE STANDARD TABLE
    OF FS_EBELN,
    Internal table to hold Purchase Document Header *
    T_EKKO LIKE STANDARD TABLE
    OF FS_EKKO,
    Temp Internal table to hold Purchase Document Header *
    T_EKKO_TEMP LIKE STANDARD TABLE
    OF FS_EKKO,
    Internal table to hold Account number and Name of the Vendor *
    T_LFA1 LIKE STANDARD TABLE
    OF FS_LFA1,
    Internal Table to hold Change date and the name of the user *
    T_CDHDR LIKE STANDARD TABLE
    OF FS_CDHDR,
    Internal Table to hold Change document items *
    T_CDPOS LIKE STANDARD TABLE
    OF FS_CDPOS,
    Temp. Internal Table to hold Change document items *
    T_CDPOS_TEMP LIKE STANDARD TABLE
    OF FS_CDPOS,
    Internal Table to hold Data Element Name *
    T_DATAELE LIKE STANDARD TABLE
    OF FS_DATAELE,
    Temp. Internal Table to hold Data Element Name *
    T_DATAELE_TEMP LIKE STANDARD TABLE
    OF FS_DATAELE,
    Internal Table to hold Short Text of the Date Element *
    T_TEXT LIKE STANDARD TABLE
    OF FS_TEXT,
    Internal Table to hold data to be displayed on the ALV grid *
    T_OUTTAB LIKE STANDARD TABLE
    OF FS_OUTTAB.
    C L A S S D E F I N I T I O N *
    CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
    *" Data declarations...................................................
    Work variables *
    DATA:
    W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
    W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
    W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
    W_VALUE TYPE EKKO-EBELN, " Reflected Value
    W_SPACE VALUE ' ', " Space
    W_FLAG TYPE I, " Flag Variable
    W_VARIANT TYPE DISVARIANT, " Variant
    *--- ALV Grid
    W_GRID TYPE REF TO CL_GUI_ALV_GRID,
    *--- Event Handler
    W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
    *--- Field catalog table
    T_FIELDCAT TYPE LVC_T_FCAT.
    AT SELECTION-SCREEN EVENT *
    AT SELECTION-SCREEN ON S_EBELN.
    Subroutine to validate Purchase Document Number.
    PERFORM VALIDATE_PD_NUM.
    AT SELECTION-SCREEN ON S_LIFNR.
    Subroutine to validate Vendor Number.
    PERFORM VALIDATE_VEN_NUM.
    AT SELECTION-SCREEN ON S_EKGRP.
    Subroutine to validate Purchase Group.
    PERFORM VALIDATE_PUR_GRP.
    START-OF-SELECTION EVENT *
    START-OF-SELECTION.
    Subroutine to select all Purchase orders.
    PERFORM SELECT_PO.
    CHECK W_FLAG EQ 0.
    Subroutine to select Object values.
    PERFORM SELECT_OBJ_ID.
    CHECK W_FLAG EQ 0.
    Subroutine to select Changed values.
    PERFORM SELECT_CHANGED_VALUE.
    CHECK W_FLAG EQ 0.
    Subroutine to Select Purchase Orders.
    PERFORM SELECT_PUR_DOC.
    Subroutine to select Vendor Details.
    PERFORM SELECT_VENDOR.
    Subroutine to select Text for the Changed values.
    PERFORM DESCRIPTION.
    END-OF-SELECTION EVENT *
    END-OF-SELECTION.
    IF NOT T_EKKO IS INITIAL.
    Subroutine to populate the Output Table.
    PERFORM FILL_OUTTAB.
    Subroutine to build Field Catalog.
    PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
    CALL SCREEN 100.
    ENDIF. " IF NOT T_EKKO...
    CLASS LCL_EVENT_HANDLER DEFINITION
    Defining Class which handles events
    CLASS LCL_EVENT_HANDLER DEFINITION .
    PUBLIC SECTION .
    METHODS:
    HANDLE_HOTSPOT_CLICK
    FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
    IMPORTING E_ROW_ID E_COLUMN_ID.
    ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION
    Implementing the Class which can handle events
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
    *---Handle Double Click
    METHOD HANDLE_HOTSPOT_CLICK .
    Subroutine to get the HotSpot Cell information.
    PERFORM GET_CELL_INFO.
    SET PARAMETER ID 'BES' FIELD W_VALUE.
    CALL TRANSACTION 'ME23N'.
    ENDMETHOD. " HANDLE_HOTSPOT_CLICK
    ENDCLASS. " LCL_EVENT_HANDLER
    *& Module STATUS_0100 OUTPUT
    PBO Event
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'OOPS'.
    SET TITLEBAR 'TIT'.
    Subroutine to fill the Variant Structure
    PERFORM FILL_VARIANT.
    IF W_GRID IS INITIAL.
    CREATE OBJECT W_GRID
    EXPORTING
    I_SHELLSTYLE = 0
    I_LIFETIME =
    I_PARENT = CL_GUI_CONTAINER=>SCREEN0
    I_APPL_EVENTS =
    I_PARENTDBG =
    I_APPLOGPARENT =
    I_GRAPHICSPARENT =
    I_NAME =
    I_FCAT_COMPLETE = SPACE
    EXCEPTIONS
    ERROR_CNTL_CREATE = 1
    ERROR_CNTL_INIT = 2
    ERROR_CNTL_LINK = 3
    ERROR_DP_CREATE = 4
    OTHERS = 5.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF. " IF SY-SUBRC <> 0
    CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
    I_BUFFER_ACTIVE =
    I_BYPASSING_BUFFER =
    I_CONSISTENCY_CHECK =
    I_STRUCTURE_NAME =
    IS_VARIANT = W_VARIANT
    I_SAVE = 'A'
    I_DEFAULT = 'X'
    IS_LAYOUT =
    IS_PRINT =
    IT_SPECIAL_GROUPS =
    IT_TOOLBAR_EXCLUDING =
    IT_HYPERLINK =
    IT_ALV_GRAPHICS =
    IT_EXCEPT_QINFO =
    IR_SALV_ADAPTER =
    CHANGING
    IT_OUTTAB = T_OUTTAB
    IT_FIELDCATALOG = T_FIELDCAT
    IT_SORT =
    IT_FILTER =
    EXCEPTIONS
    INVALID_PARAMETER_COMBINATION = 1
    PROGRAM_ERROR = 2
    TOO_MANY_LINES = 3
    OTHERS = 4
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF. " IF SY-SUBRC <> 0.
    ENDIF. " IF W_GRID IS INITIAL
    CREATE OBJECT W_EVENT_CLICK.
    SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
    ENDMODULE. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    PAI Event
    MODULE USER_COMMAND_0100 INPUT.
    CASE SY-UCOMM.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
    LEAVE PROGRAM.
    WHEN 'CANCEL'.
    LEAVE TO SCREEN 0.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *& Form PREPARE_FIELD_CATALOG
    Subroutine to build the Field catalog
    <--P_T_FIELDCAT Field Catalog Table
    FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
    DATA LS_FCAT TYPE LVC_S_FCAT.
    Purchasing group...
    LS_FCAT-FIELDNAME = 'EKGRP'.
    LS_FCAT-REF_TABLE = 'EKKO'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Purchasing Document Number...
    LS_FCAT-FIELDNAME = 'EBELN'.
    LS_FCAT-REF_TABLE = 'EKKO' .
    LS_FCAT-EMPHASIZE = 'C411'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    LS_FCAT-HOTSPOT = 'X'.
    APPEND LS_FCAT TO PT_FIELDCAT .
    CLEAR LS_FCAT .
    Name of Person who Created the Object...
    LS_FCAT-FIELDNAME = 'ERNAM'.
    LS_FCAT-REF_TABLE = 'EKKO'.
    LS_FCAT-OUTPUTLEN = '15' .
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Purchasing Document Date...
    LS_FCAT-FIELDNAME = 'BEDAT'.
    LS_FCAT-REF_TABLE = 'EKKO'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Vendor's account number...
    LS_FCAT-FIELDNAME = 'LIFNR'.
    LS_FCAT-REF_TABLE = 'EKKO'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Account Number of Vendor or Creditor...
    LS_FCAT-FIELDNAME = 'NAME1'.
    LS_FCAT-REF_TABLE = 'LFA1'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    LS_FCAT-COLTEXT = 'Vendor Name'(001).
    LS_FCAT-SELTEXT = 'Vendor Name'(001).
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Creation date of the change document...
    LS_FCAT-FIELDNAME = 'UDATE'.
    LS_FCAT-REF_TABLE = 'CDHDR'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    LS_FCAT-COLTEXT = 'Change Date'(002).
    LS_FCAT-SELTEXT = 'Change Date'(002).
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    User name of the person responsible in change document...
    LS_FCAT-FIELDNAME = 'USERNAME'.
    LS_FCAT-REF_TABLE = 'CDHDR'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '10'.
    LS_FCAT-COLTEXT = 'Modified by'(003).
    LS_FCAT-SELTEXT = 'Modified by'(003).
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Short Text Describing R/3 Repository Objects...
    LS_FCAT-FIELDNAME = 'DDTEXT'.
    LS_FCAT-REF_TABLE = 'DD04T'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '15'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    Old contents of changed field...
    LS_FCAT-FIELDNAME = 'VALUE_OLD'.
    LS_FCAT-REF_TABLE = 'CDPOS'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '12'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    New contents of changed field...
    LS_FCAT-FIELDNAME = 'VALUE_NEW'.
    LS_FCAT-REF_TABLE = 'CDPOS'.
    LS_FCAT-INTTYPE = 'C'.
    LS_FCAT-OUTPUTLEN = '12'.
    APPEND LS_FCAT TO PT_FIELDCAT.
    CLEAR LS_FCAT.
    ENDFORM. " PREPARE_FIELD_CATALOG
    *& Form SELECT_PO
    Subroutine to select all the Purchase Orders
    There are no interface parameters to be passed to this subroutine.
    FORM SELECT_PO .
    SELECT EBELN " Purchasing Document Number
    ERNAM " Name of Person who Created
    " the Object
    LIFNR " Vendor's account number
    EKGRP " Purchasing group
    BEDAT " Purchasing Document Date
    FROM EKKO
    PACKAGE SIZE 10000
    APPENDING TABLE T_EBELN
    WHERE EBELN IN S_EBELN
    AND BEDAT IN S_BEDAT.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    W_FLAG = 1.
    MESSAGE S401(M8).
    ENDIF. " IF SY-SUBRC NE 0
    ENDFORM. " SELECT_PO
    *& Form SELECT_OBJ_ID
    Subroutine to select Object ID
    There are no interface parameters to be passed to this subroutine.
    FORM SELECT_OBJ_ID .
    IF NOT T_EBELN IS INITIAL.
    SELECT OBJECTCLAS " Object Class
    OBJECTID " Object value
    CHANGENR " Document change number
    USERNAME " User name
    UDATE " Creation date
    FROM CDHDR
    INTO TABLE T_CDHDR
    FOR ALL ENTRIES IN T_EBELN
    WHERE OBJECTID EQ T_EBELN-EBELN
    AND UDATE IN S_UDATE
    AND TCODE IN ('ME21N','ME22N','ME23N').
    ENDSELECT.
    IF SY-SUBRC NE 0.
    W_FLAG = 1.
    MESSAGE S833(M8) WITH 'Header Not Found'(031).
    ENDIF. " IF SY-SUBRC NE 0.
    ENDIF. " IF NOT T_EBELN IS INITIAL
    ENDFORM. " SELECT_OBJ_ID
    *& Form SELECT_CHANGED_VALUE
    Subroutine to select Changed Values
    There are no interface parameters to be passed to this subroutine.
    FORM SELECT_CHANGED_VALUE .
    IF NOT T_CDHDR IS INITIAL.
    SELECT OBJECTCLAS " Object class
    OBJECTID " Object value
    CHANGENR " Document change number
    TABNAME " Table Name
    FNAME " Field Name
    VALUE_NEW " New contents of changed field
    VALUE_OLD " Old contents of changed field
    FROM CDPOS
    PACKAGE SIZE 10000
    APPENDING TABLE T_CDPOS
    FOR ALL ENTRIES IN T_CDHDR
    WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
    AND OBJECTID EQ T_CDHDR-OBJECTID
    AND CHANGENR EQ T_CDHDR-CHANGENR.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    W_FLAG = 1.
    MESSAGE S833(M8) WITH 'Item Not Found'(032).
    ENDIF. " IF SY-SUBRC NE 0.
    ENDIF. " IF NOT T_CDHDR IS INITIAL
    T_CDPOS_TEMP[] = T_CDPOS[].
    ENDFORM. " SELECT_CHANGED_VALUE
    *& Form SELECT_PUR_DOC
    Subroutine to select Purchase Order Details
    There are no interface parameters to be passed to this subroutine.
    FORM SELECT_PUR_DOC .
    IF NOT T_CDPOS IS INITIAL.
    SORT T_EBELN BY EBELN.
    LOOP AT T_CDPOS INTO FS_CDPOS.
    READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
    FS_CDPOS-OBJECTID BINARY SEARCH.
    IF SY-SUBRC NE 0.
    DELETE TABLE T_EBELN FROM FS_EBELN.
    ENDIF. " IF SY-SUBRC NE 0.
    ENDLOOP. " LOOP AT T_CDPOS...
    LOOP AT T_EBELN INTO FS_EBELN.
    MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
    MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
    MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
    MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
    MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
    APPEND FS_EKKO TO T_EKKO.
    ENDLOOP. " LOOP AT T_EBELN...
    T_EKKO_TEMP[] = T_EKKO[].
    ENDIF. " IF NOT T_CDPOS IS INITIAL
    ENDFORM. " SELECT_PUR_DOC
    *& Form SELECT_VENDOR
    Subroutine to select Vendor details
    There are no interface parameters to be passed to this subroutine.
    FORM SELECT_VENDOR .
    IF NOT T_EKKO IS INITIAL.
    SORT T_EKKO_TEMP BY LIFNR.
    DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
    SELECT LIFNR " Account Number of Vendor or
    " Creditor
    NAME1 " Name 1
    FROM LFA1
    INTO TABLE T_LFA1
    FOR ALL ENTRIES IN T_EKKO_TEMP
    WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
    IF SY-SUBRC NE 0.
    MESSAGE S002(M8) WITH 'Master Details'(033).
    ENDIF. " IF SY-SUBRC NE 0.
    ENDIF. " IF NOT T_EKKO IS INITIAL
    ENDFORM. " SELECT_VENDOR
    *& Form DESCRIPTION
    Subroutine to get the description
    There are no interface parameters to be passed to this subroutine.
    FORM DESCRIPTION .
    IF NOT T_CDPOS IS INITIAL.
    SORT T_CDPOS_TEMP BY TABNAME FNAME.
    DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
    SELECT TABNAME " Table Name
    FIELDNAME " Field Name
    ROLLNAME " Data element
    FROM DD03L
    INTO TABLE T_DATAELE
    FOR ALL ENTRIES IN T_CDPOS_TEMP
    WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
    AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
    IF NOT T_DATAELE IS INITIAL.
    T_DATAELE_TEMP[] = T_DATAELE[].
    SORT T_DATAELE_TEMP BY ROLLNAME.
    DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
    SELECT ROLLNAME " Data element
    DDTEXT " Short Text Describing R/3
    " Repository Objects
    FROM DD04T
    INTO TABLE T_TEXT
    FOR ALL ENTRIES IN T_DATAELE_TEMP
    WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
    AND DDLANGUAGE EQ SY-LANGU.
    IF SY-SUBRC NE 0.
    EXIT.
    ENDIF. " IF SY-SUBRC NE 0.
    ENDIF. " IF NOT T_DATAELE IS INITIAL.
    ENDIF. " IF NOT T_CDPOS IS INITIAL.
    ENDFORM. " DESCRIPTION
    *& Form FILL_OUTTAB
    Subroutine to populate the Outtab
    There are no interface parameters to be passed to this subroutine.
    FORM FILL_OUTTAB .
    SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
    SORT T_EKKO BY EBELN.
    SORT T_LFA1 BY LIFNR.
    SORT T_DATAELE BY TABNAME FIELDNAME.
    SORT T_TEXT BY ROLLNAME.
    LOOP AT T_CDPOS INTO FS_CDPOS.
    READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
    OBJECTCLAS = FS_CDPOS-OBJECTCLAS
    OBJECTID = FS_CDPOS-OBJECTID
    CHANGENR = FS_CDPOS-CHANGENR
    BINARY SEARCH.
    IF SY-SUBRC EQ 0.
    MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
    MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
    READ TABLE T_EKKO INTO FS_EKKO WITH KEY
    EBELN = FS_CDHDR-OBJECTID
    BINARY SEARCH.
    IF SY-SUBRC EQ 0.
    MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
    MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
    MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
    MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
    MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
    READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
    LIFNR = FS_EKKO-LIFNR
    BINARY SEARCH.
    IF SY-SUBRC EQ 0.
    MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
    ENDIF. " IF SY-SUBRC EQ 0.
    ENDIF. " IF SY-SUBRC EQ 0.
    ENDIF. " IF SY-SUBRC EQ 0.
    MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
    MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
    READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
    TABNAME = FS_CDPOS-TABNAME
    FIELDNAME = FS_CDPOS-FNAME
    BINARY SEARCH.
    IF SY-SUBRC EQ 0.
    READ TABLE T_TEXT INTO FS_TEXT WITH KEY
    ROLLNAME = FS_DATAELE-ROLLNAME
    BINARY SEARCH.
    IF SY-SUBRC EQ 0.
    MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
    ENDIF. " IF SY-SUBRC EQ 0.
    ENDIF. " IF SY-SUBRC EQ 0.
    APPEND FS_OUTTAB TO T_OUTTAB.
    CLEAR FS_OUTTAB.
    ENDLOOP.
    ENDFORM. " FILL_OUTTAB
    *& Form GET_CELL_INFO
    Subroutine to get the Cell Information
    --> W_VALUE Holds the value of Hotspot clicked
    FORM GET_CELL_INFO .
    CALL METHOD W_GRID->GET_CURRENT_CELL
    IMPORTING
    E_ROW =
    E_VALUE = W_VALUE
    E_COL =
    ES_ROW_ID =
    ES_COL_ID =
    ES_ROW_NO =
    ENDFORM. " GET_CELL_INFO
    *& Form VALIDATE_PD_NUM
    Subroutine to validate Purchase Document Number
    There are no interface parameters to be passed to this subroutine.
    FORM VALIDATE_PD_NUM .
    IF NOT S_EBELN[] IS INITIAL.
    SELECT EBELN " Purchase Document Number
    FROM EKKO
    INTO W_EBELN
    UP TO 1 ROWS
    WHERE EBELN IN S_EBELN.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E717(M8).
    ENDIF. " IF SY-SUBRC NE 0
    ENDIF. " IF NOT S_EBELN[]...
    ENDFORM. " VALIDATE_PD_NUM
    *& Form VALIDATE_VEN_NUM
    Subroutine to validate Vendor Number
    There are no interface parameters to be passed to this subroutine.
    FORM VALIDATE_VEN_NUM .
    IF NOT S_LIFNR[] IS INITIAL.
    SELECT LIFNR " Vendor Number
    FROM LFA1
    INTO W_LIFNR
    UP TO 1 ROWS
    WHERE LIFNR IN S_LIFNR.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E002(M8) WITH W_SPACE.
    ENDIF. " IF SY-SUBRC NE 0
    ENDIF. " IF NOT S_LIFNR[]...
    ENDFORM. " VALIDATE_VEN_NUM
    *& Form VALIDATE_PUR_GRP
    Subroutine to validate the Purchase Group
    There are no interface parameters to be passed to this subroutine.
    FORM VALIDATE_PUR_GRP .
    IF NOT S_EKGRP[] IS INITIAL.
    SELECT EKGRP " Purchase Group
    FROM T024
    INTO W_EKGRP
    UP TO 1 ROWS
    WHERE EKGRP IN S_EKGRP.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E622(M8) WITH W_SPACE.
    ENDIF. " IF SY-SUBRC NE 0
    ENDIF. " IF NOT S_EKFRP[]...
    ENDFORM. " VALIDATE_PUR_GRP
    *& Form FILL_VARIANT
    Subroutine to fill the Variant Structure
    There are no interface parameters to be passed to this subroutine
    FORM FILL_VARIANT .
    Filling the Variant structure
    W_VARIANT-REPORT = SY-REPID.
    W_VARIANT-USERNAME = SY-UNAME.
    ENDFORM. " FILL_VARIANT
    Also,
    REPORT YMS_HIERSEQLISTDISPLAY .
    Program with FM REUSE_ALV_HIERSEQ_LIST_DISPLAY *
    Author : Michel PIOUD *
    Email : [email protected] HomePage : http://www.geocities.com/mpioud *
    TYPE-POOLS: slis. " ALV Global types
    CONSTANTS :
    c_x VALUE 'X',
    c_gt_vbap TYPE SLIS_TABNAME VALUE 'GT_VBAP',
    c_gt_vbak TYPE SLIS_TABNAME VALUE 'GT_VBAK'.
    SELECTION-SCREEN :
    SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
    PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN :
    SKIP, BEGIN OF LINE,COMMENT 5(27) v_2 FOR FIELD p_expand. "#EC NEEDED
    PARAMETERS p_expand AS CHECKBOX DEFAULT c_x.
    SELECTION-SCREEN END OF LINE.
    TYPES :
    1st Table
    BEGIN OF ty_vbak,
    vbeln TYPE vbak-vbeln, " Sales document
    kunnr TYPE vbak-kunnr, " Sold-to party
    netwr TYPE vbak-netwr, " Net Value of the Sales Order
    erdat TYPE vbak-erdat, " Creation date
    waerk TYPE vbak-waerk, " SD document currency
    expand TYPE xfeld,
    END OF ty_vbak,
    2nd Table
    BEGIN OF ty_vbap,
    vbeln TYPE vbap-vbeln, " Sales document
    posnr TYPE vbap-posnr, " Sales document
    matnr TYPE vbap-matnr, " Material number
    netwr TYPE vbap-netwr, " Net Value of the Sales Order
    waerk TYPE vbap-waerk, " SD document currency
    END OF ty_vbap.
    DATA :
    1st Table
    gt_vbak TYPE TABLE OF ty_vbak,
    2nd Table
    gt_vbap TYPE TABLE OF ty_vbap.
    INITIALIZATION.
    v_1 = 'Maximum of records to read'.
    v_2 = 'With ''EXPAND'' field'.
    START-OF-SELECTION.
    Read Sales Document: Header Data
    SELECT vbeln kunnr netwr waerk erdat
    FROM vbak
    UP TO p_max ROWS
    INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
    IF NOT gt_vbak[] IS INITIAL.
    Read Sales Document: Item Data
    SELECT vbeln posnr matnr netwr waerk
    FROM vbap
    INTO CORRESPONDING FIELDS OF TABLE gt_vbap
    FOR ALL ENTRIES IN gt_vbak
    WHERE vbeln = gt_vbak-vbeln.
    ENDIF.
    PERFORM f_display.
    Form F_DISPLAY
    FORM f_display.
    Macro definition
    DEFINE m_fieldcat.
    ls_fieldcat-tabname = &1.
    ls_fieldcat-fieldname = &2.
    ls_fieldcat-ref_tabname = &3.
    ls_fieldcat-cfieldname = &4. " Field with currency unit
    append ls_fieldcat to lt_fieldcat.
    END-OF-DEFINITION.
    DEFINE m_sort.
    ls_sort-tabname = &1.
    ls_sort-fieldname = &2.
    ls_sort-up = c_x.
    append ls_sort to lt_sort.
    END-OF-DEFINITION.
    DATA:
    ls_layout TYPE slis_layout_alv,
    ls_keyinfo TYPE slis_keyinfo_alv,
    ls_sort TYPE slis_sortinfo_alv,
    lt_sort TYPE slis_t_sortinfo_alv," Sort table
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
    ls_layout-group_change_edit = c_x.
    ls_layout-colwidth_optimize = c_x.
    ls_layout-zebra = c_x.
    ls_layout-detail_popup = c_x.
    ls_layout-get_selinfos = c_x.
    IF p_expand = c_x.
    ls_layout-expand_fieldname = 'EXPAND'.
    ENDIF.
    Build field catalog and sort table
    m_fieldcat c_gt_vbak 'VBELN' 'VBAK' ''.
    m_fieldcat c_gt_vbak 'KUNNR' 'VBAK' ''.
    m_fieldcat c_gt_vbak 'NETWR' 'VBAK' 'WAERK'.
    m_fieldcat c_gt_vbak 'WAERK' 'VBAK' ''.
    m_fieldcat c_gt_vbak 'ERDAT' 'VBAK' ''.
    m_fieldcat c_gt_vbap 'POSNR' 'VBAP' ''.
    m_fieldcat c_gt_vbap 'MATNR' 'VBAP' ''.
    m_fieldcat c_gt_vbap 'NETWR' 'VBAP' 'WAERK'.
    m_fieldcat c_gt_vbap 'WAERK' 'VBAP' ''.
    m_sort c_gt_vbak 'KUNNR'.
    m_sort c_gt_vbap 'NETWR'.
    ls_keyinfo-header01 = 'VBELN'.
    ls_keyinfo-item01 = 'VBELN'.
    ls_keyinfo-item02 = 'POSNR'.
    Dipslay Hierarchical list
    CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    EXPORTING
    i_callback_program = sy-cprog
    i_callback_user_command = 'USER_COMMAND'
    is_layout = ls_layout
    it_fieldcat = lt_fieldcat
    it_sort = lt_sort
    i_tabname_header = c_gt_vbak
    i_tabname_item = c_gt_vbap
    is_keyinfo = ls_keyinfo
    TABLES
    t_outtab_header = gt_vbak
    t_outtab_item = gt_vbap
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " F_LIST_DISPLAY
    Form USER_COMMAND *
    FORM user_command USING i_ucomm TYPE sy-ucomm
    is_selfield TYPE slis_selfield. "#EC CALLED
    DATA ls_vbak TYPE ty_vbak.
    CASE i_ucomm.
    WHEN '&IC1'. " Pick
    CASE is_selfield-tabname.
    WHEN c_gt_vbap.
    WHEN c_gt_vbak.
    READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
    IF sy-subrc EQ 0.
    Sales order number
    SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
    Display Sales Order
    CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
    ENDIF.
    ENDCASE.
    ENDCASE.
    ENDFORM. " USER_COMMAND
    END OF PROGRAM Z_ALV_HIERSEQ_LIST ******************
    hope this helps.
    cheers,
    Hema.

  • How I can use a Bookmark?

    Hello,
    I would like to Know how I can use a Bookmark in the report. I am using the report builder.
    Thanks!

    You do not really "add" a Bookmark, you just define one, either data driven or with a (fix) Expression:
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

  • How to identify reports that are using a specific universe object?

    Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

    Hi Samuel,
    In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
    Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.                                                                               
    Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins                                                                               
    Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\ 
    May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
    Regards,
    Sarbhjeet Kaur

  • What is context objects and how we can use it Receiver Determination

    hi,
    i have situation here a idoc is triggered into the xi and i need to use the conditions in the receiverdetermination in that condition i need to use  context object how i can use it? and what is the difference it makes and why i need to use it?
    thanks in advance
    Amaresh

    HI,
    Context objects are alternative to XPATH expressions. It is like macros in other programming langugage. If you define this , you can use this object in the receiver determination while doing conditional receiver determination
    For more-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
    /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
    Regards,
    Moorthy

  • How i can use user-exit

    How i can use user-exit

    hi,
    in order to find out the user exits for any tcode,
    1. get the developement class of the tcode from SE93.
    2. Now goto transaction SMOD and press F4,
    3. give in the Deve class in the dev class and Press ENTER
    this will show u the exits for any tcode.
    or execute this report
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Regards
    Anver

  • I want to know how I can use 2400 or 6517A to measure 4-terminal or 2-terminal nanowire resistance?

    I want to know how I can use 2400 or 6517A to measure 4-terminal or 2-terminal nanowire resistance? The resistance is about 1M-100M ohms. I am a fresh for NI instruments and Labview. So would you mind giving me a program for 2400 or 6514A for these 2 experiments directly?
    Thanks!

    Those are Keithley, not NI instruments and how to perform specific measurements would be explained in the manuals, To control them, you can use the NI written driver for the 2400 or the Keithley written driver for the 6517A. What an instrument driver is and how to use one is explained on the main instrument driver network page.

  • How we can use VC as a NWDS development tool

    Hi,
           I am new in visual composer .Can any one help me how we can use VC as a NWDS development tool. Can we develop all application which we are developing in webdynpro?
    Regards,
    Kundan

    Hi,
    In NWDS using WebDynpro we can develop applications, we can write our logic as we want etc,
    We can write any complex logic using coding in NWDS
    But in V C, we cannot apply much logic, its mainly to display reports and all in a very good way.
    VC is not a better solution for complex and business calculations.
    For Visual Composer
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe
    For WebDynpro(Java)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/ca29652fe86babe10000000a1553f6/frameset.htm
    look for beginner tutorial WebDynpro / iView
    https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
    Raghu

  • How we can use footer window in a last page?

    I m making SAP SCRIPT..
    How we can use footer window in a last page?

    Hi vikas,
    is it that you want to use footer window to be printed in last page...then do like this,
    command to be used:
    /: IF &NEXTPAGE& EQ 0
    whatever footer you want.
    /: ENDIF
    and go thru the link and revert back if any quiries r present..
    http://sapscriptcode.blogspot.com/2007/05/print-footer-notes-only-on-last-page.html
    pls reward if helps,
    regards.

Maybe you are looking for