How i can do 3 partition on Macintosch HD disck?
Goodmorning,
my question is:
- HOW I CAN DO 3 PARTITION ON MACINTOSCH HD DISCK?
Now i have 2 partition: the first is for OS X Yosemite, the second for Windows 8.
I want create a new partition for a new OS (windows 7 or Linux). How i can do it?
I have a MacBook Air 2013 with 120 GB
Thank at all
Please see Re: Boot Camp repair via Hybrid MBR fix after 5+ partitions.
Similar Messages
-
I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?
There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both
-
I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
ManuelYou can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record. -
I want to partition c drive but it shows an message no free MBR slots available how it can be fix?
i have hp dv62127 laptop and I want to partition C disk drive into 2 more disk drives but this laptop contain 4 primary partition and due to it shows an message no free MBR slots available so how it can be fixed so that i could make 3 partion?
This question was solved.
View Solution.You can resize (shrink) the C: Partition and make logical drives within it. You cannot make more Primary drives. There is a limit of four primary drives in a Windows operating system.The new logical drives will not be bootable.
Be advised:
When you change the original partition scheme you will lose the ability to access the Recovery manager with the F11 keystroke to recover your operating system.
A better option is to purchase a second hard disk. Back up the data on your original hard drive so you can put it on the new one. Remove the original hard drive and perform a system recovery using the recovery media to the new hard disk. With the original hard disk put aside in a safe place you can always recover your notebook by removing the new hard drive and putting the old one back in its place. The F11 method of invoking the Recovery manager will be available on the new hard drive. The original hard disk in your notebook is a SATA 2.5" notebook that is 9.5mm in height. If you consider a disk larger than 500GB pay close attention to the height. A 12.5mm might not fit in the drive bay.
Identify your notebook with the p/n (Product name) shown on the sticker on the bottom of the notebook The following image is a sample service tag.You posted an incomplete and improperly formatted model number. There are two letters missing that
should be on the end of what you posted.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
How do I move a partition on my mac hard drive, to an external hard drive so that i can run windows when the external hard drive is connected
Are you talking about a Bootcamp partition? You can't boot Windows from an external drive.
-
Time of windows 7 installation i drop / remove all the mac partation. Now i again want to install mac how i can do this i have not mac lion disk and no disk provide at time of purchase please guide me
I tried searching through the other questions here is a question if answer well help answer the first?
How do I figure out what is my sound driver is called? I think Windows calls it High Definition Audio Device however something about the windows is mistaken because I have no sound. But when on the mac side I do not know where to look either. If I can find out what the sound driver is called then I can fined a update download. The other similar questions that were answered suggested that the sound driver needed updated. -
How I can change this query, so I can display the name and scores in one r
How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543 A05 24 A01 24 BAC 24 BAE 24 A02 20 BAM 20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
max(decode(rn,1,sortest_tesc_code)) tesc_code1,
max(decode(rn,1,score)) score1,
max(decode(rn,2,sortest_tesc_code)) tesc_code2,
max(decode(rn,2,score)) score2,
max(decode(rn,3,sortest_tesc_code)) tesc_code3,
max(decode(rn,3,score)) score3,
max(decode(rn,4,sortest_tesc_code)) tesc_code4,
max(decode(rn,4,score)) score4,
max(decode(rn,5,sortest_tesc_code)) tesc_code5,
max(decode(rn,5,score)) score5,
max(decode(rn,6,sortest_tesc_code)) tesc_code6,
max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
sortest_tesc_code,
score,
row_number() over (partition by sortest_pidm order by score desc) rn
FROM (select sortest_pidm,
sortest_tesc_code,
max(sortest_test_score) score
from sortest,SPRIDEN
where
SPRIDEN_pidm =SORTEST_PIDM
AND sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
and sortest_pidm is not null
GROUP BY sortest_pidm, sortest_tesc_code))
GROUP BY sortest_pidm;
Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME LOC JOB_1 SAL_1 JOB_2 SAL_2 JOB_3 SAL_3
20 RESEARCH DALLAS ANALYST 3000 MANAGER 2975 CLERK 1100
10 ACCOUNTING NEW YORK MANAGER 2450 CLERK 1300
30 SALES CHICAGO MANAGER 2850 CLERK 950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT deptno
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno
, e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT deptno, dname, loc -- Changed
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno, dname, loc -- Changed
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno -- , dname, loc -- Changed
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno, d.dname, d.loc -- Changed
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc -- Changed
, e.job
GROUP BY deptno, dname, loc -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT deptno, dname, loc
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT e.deptno, d.dname, d.loc
, e.job
, MAX (e.sal) AS max_sal
, ROW_NUMBER () OVER ( PARTITION BY e.deptno
ORDER BY MAX (sal) DESC
) AS rn
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc
, e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature. -
How to override the 'default' partition in composite.xml - urgent
All,
Version: 11.1.1.4
I have created a simple BPEL A which invokes another BPEL B which is deployed to 'default' partition. In the composite.xml of BPEL A I can see the WSDL location of BPEL B as *"http://localhost:7001/soa-infra/services/default/BPELB/BPELB.wsdl"*. I noticed that the name of the partition (i.e in our case its 'default') is hardcoded in the wsdl location. During deployment I want to override to other partition, how I can achieve this?
thanks
senIf you want to change the partion name at run time then used Token ,value concept and define it in build.xml
For Example
<target name="replaceAllValues">
<input
message="Please enter full path of the file directory:"
addproperty="dirPath"/>
<replace dir="${dirPath}">
<replacefilter
token="OldValue."
value="Newvalue"/>
</replace>
</target>
Call the above target from ant build.xml before you deploying the service.
Regards,
Tarak. -
How to create multi volume partition
Hi
I'm trying to figure out how I can create one single partition accross multiple disks so that I basically can extend the partition at the moment I'm running out of diskspace. The disks that I use are western digital mybook daisychained via firewire 800.
I tried to find option in diskutil but couldn't find it, possible that this might be doable on the command line but I'm too unfamiliar with it.
Any suggestions are highly appreciated.
Thanks in advance,
Frans van WesselMatt Clifton wrote:
The only way to do what you want with Mac Extended format is to use RAID to stripe a volume across multiple disks. However, it is not dynamic in that you cannot add space later in the way you describe.
I feel I must add that in addition to missing "dynamics" and a few other disadvantages, RAID 0 is highly dangerous due to zero fault tolerance. If only one of the partitions/drives goes bad, none of the data on all of the partitions can be accessed anymore!
fvwessel, you better locate large portions of your data, such as videos, music, photos, onto separate, individual and independent drives. It'll make it safer, and typically all apps are supporting it. -
How do I mount a partition at a specific mount point.
How do I mount a partition at a specific mount point? For example I see a Vol01 disk image, which is a partition of one of my hard drives, sitting on my desktop. Under the disk utility it says that its mount point is /Volumes/Vol01. How do I mount this partition as a file system at /Users?
Thanks, much appreciated.why do you want to do this? it sounds like you want to keep your home directory on an external drive. this can be done without changing the mount point of the external. copy the home directory to the external. then in system preferences preferences->accounts, unlock the lock at the bottom, control-click on your user and select "advanced options." In the resulting popup change the location of the home directory to the external.
in general to change the default mount point of a drive see this link
http://beta.jamesstroud.com/jamess-miscellaneous-how-tos/os-x-admin/os-x-firewir e-mount-point -
How to create a second partition on the harddisk?
Hello To All Members!
I recently got some viruses on my laptop. So I had to use my recovery cd to recover my system.
Now the problem is that I asked me for the partition where are the files which are being extracted. I marked it to 30GB.
So, windows is working fine but my Rest of 50GB will not be shown.
I thought that the recovery cd will make a new second partition as well, but it did not. Now how to make some other partitions?
Second question related to first one is how much time i can use this recovery disk. I mean will the windows remain genuine?????
For the partition problem i dont know of some possible solutions cause i needed three partitions, 1st of 30GB(Windows Default) and other two of 25GB.
The Best Solution coming in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
But it is makes some new questions in my mind. Do i have to use a recovery cd again? If yes than I will not use this process again cause it will ask for partition to extract files of windows and i will choose 30GB again.
And again it will remove additional partitions.
Please help me and clear the questions coming in my mind..
[Edited by: admin on 31-Mar-2007 08:32]Hi there,
do know for the UlltimateBootCD4Win? This from CD bootable WinXP-BartPEedition with additional tools gives you the ability to make such things like partitioning, backup or formatting your HDD.
It has many more applications which help you to maintain your system without booting your original OS.
So I think that this CD will solve your partitioning issues.
Heres a link: www.ubcd4win.com/
Just try it and tell me your opinion.
Nice weekend and greetings from the sunny south ;) -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
How to clone Boot Camp partition when Winclone does not work
The hard drive in my MacBook Pro is failing. It has 2 partions, one for Apple and the other is a Bootcamp with Windows 7.
I tried repairing it with Disk Utility, which did not work. I also ran DiskWarrior, which resulted in the error message: "Directory cannot be rebuilt due to disk hardware failure". I was able to copy my Apple files through DiskWarrior although there were a couple of errors.
My question is how to clone my Bootcamp Partition. I tried making an image with Disk Utility but it failed. I also tried using Winclone and it failed indicating there were hard drive issues.
Is there another way to try to copy the Bootcamp partition? I can boot to Apple so running a program/app or trying UNIX commands might work.
Thank you in advance.Some previous forum comments I have collected regarding backup of BootCamp.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
Paragon HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
I tried the native Windows backup utility. It worked to backup and restore my Windows partition, but I noticed a "bad" side effect. When I would restore a Windows Backup to my HD, it would corrupt my MacOS boot partition, so I would then have to restore the Mac partition as well.
Winclone allows you to migrate your Bootcamp partition from one Mac to another Mac and make sure Windows will boot. However, if the processor (for example, Core Duo or i7) is a different type, the restored version of Windows may not be supported or be able to run on the new Mac. If you are migrating between Macs that are the same type (MacBook Air to MacBook Air, for example), you will have the greatest chance of success. You can try to restore Winclone images between different types of Macs (for example, a Mac Pro to a Mac Mini), but be aware that if Windows boots but does not reach the desktop, it is probably not an issue with Winclone, but rather the change in processor type. -
How do I delete a partition on a hard drive?
I have a 2012 MacBook Pro with OS X Lion (don't know the version), I installed windows 7 shortly afterwards and primarily used that. I've now sold the laptop but need to delete the windows partition and that's where the problem started. The original Mac partition stopped working, so I deleted the content on the bootcamp partition and reinstalled OSX onto that one, now I am unable to delete the original partition so only half of the 500GB hard drive is available to use. Can anyone tell me how to delete the old partition so I can then just re-install OSX so it's ready for its new owner? I also have two recovery HD partitions. Please help!
make it easy, kill 2 birds with 1 stone
reboot holding 3 keys - option, command, r - you should see a spinning globe, if not try again
open disk utilty, select your HD on the left and erase/reformat as mac journaled
exit du, choose install OSX
result - no more windows or other random partitions and a fresh OSX like out of the box -
How i can make a backup without separate hdd?
How i can make a backup without seperate hdd?
how i can partition the hd? please step by step...
today it's my first apple-day ... i was 18 years windows user
While I agree with everyone else, get a second disk and backup to that disk, I will point you in the directory of partitioning.
Applications -> Utilities -> Disk Utility
Disk Utility may or may not be able to carve a new partition out of your existing partition, depending on whether the end of the current partition is unused so the current partition can be reduced in size and a new partition added.
It may be necessary to use an external disk, clone your internal disk using SuperDuper or Carbon Copy Cloner (both free to use when creating a full clone), then partition your internal disk, and finally restore the external clone to the internal disk again using SuperDuper or Carbon Copy Cloner.
If you do not want to get a 2nd disk, then consider using an on-line service such as CrashPlan, Carbonite, Mozy, etc... for the files you absolutely cannot aford to loose.
Maybe you are looking for
-
Error when Importing a External table
When I am trying to import a external table I am getting a error as SQL Exception. Any ideas as to how to fix this error. The external table is under one schema. I have a locator in OWB pointing to that schema and I am trying to Import the external t
-
Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)
Hi! I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it? Thanks...
-
Cannot update to iOS 7.0.3 on iPad 2
I cannot update the software on my iPad 2. It keeps giving me a network error on iTunes. I tried on wireless too without luck.
-
IPad 3 slow charging with 10W charger?
Got my new iPad yeserday. Compared with my iPad 1 the charging via the 10W charger is really slow. Went to bed with power at 20%, and over 6 hours it only reached 85% charge. Normal? Others seeing the same thing? I suppose the battery capa
-
How do i adjust layers below a Shadows/Highlights smart object layer
Hi In Photoshop CC I have created a number of layers for smart tonal adjustments. I then created a Smart object Shadow/Highlight layer base upon a copy of all layers below. However my layers below can no longer be altered as the Shadow/Highl;ight lay