How I can fix my iPad smart case ?
How I can fix my iPad smart case ?
If you close your smart case it's have to get log off but mine it doesn't work it's mean when I close mine it doesn't get off automatically !
Similar Messages
-
How to clean an ipad smart case
How do I clean a ipad smart case?
What's an iPad smart case and what is it made of?
-
How I can fix IPAD is disabled
How I can fix my IPAD is disabled
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
How many magnets should the cover on the iPad Smart Case have?
My cover of my iPad Smart Case does not work so well as a stand in landscape mode. I discovered that mine has only 2, 1 in the center and 1 in a corner. Anyone else have this cover and confirm how many magnets theirs has? Wondering if it's a defect or a "feature".
Well, for starters, the cover had quite a few more: http://www.ifixit.com/Teardown/iPad+2+Smart+Cover+Teardown/5089
I'd like to believe that the case should be similar in the magnet complement, but can't say for sure. I have mine encased in a Lifeproof watertight shell. BTW, the appearance/functional differences between the case and the cover: http://www.imore.com/ipad-air-smart-case-vs-smart-cover-which-should-you-get -
How do I fix a ipad that is "disabled"? When we connect to itunes it requests a password that must be typed into the ipad - which we can't do because it is locked.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have an ipad and it's been refusing to connect to the wifi lately no matter where I go,
it used to work and then all of a sudden it wont.
i type in the password and it comes up with 'unable to connect to wifi'
anyone know how I can fix it?First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My iPad screen is blank except for the service and battery symbol. Any ideas how I can fix this?
My Ipad screen is blank except for the service and battery symbols. Any ideas how I can fix this please?
Try restarting
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
i have no before owner to active my mini i pad . when i format ipad then i face a apple account . but know at this time no owner of the apple account . how i can fix it .... pls tell us
Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem. -
How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english
Use the same cleaner as for shoes.
-
My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
Can I wash my iPad smart case ?
Is it alright to wash my iPad smart case?
It would probably be much better to simply wipe it off, perhaps with a damp sponge (not really wet) and definitely not with the iPad attached You would be surprised how many times things like that are done.
The cases and covers usually do not do very well when really soaked in washing. -
How I can get all my computer email contact in my IPad?And how I can sync my IPad to my computer ??, How I can get all my computer email contact in my IPad?And how I can sync my IPad to my computer ??
You should be able to:
Disable automatic syncing of devices (Edit > Preferences > Devices)
Backup the device to the new installation (Right-click device > Back Up)
Transfer your purchases into your authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in the apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2 -
For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?
Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
How i can fix sound on i pad air ?
How i can fix problem with sound on ipad air its have no sound at all ???!!!!
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
Boot Camp 2.1 Vista 32 no audio after install
Hi, I recently installed the boot camp 2.1 update on my mbp 2.4, for windows vista. Everything went fine expect for one problem, I have no audio. I can't see anything wrong in device manager, and the icon is still present in the task bar. It's not mu
-
Atv3 will mirror but not airplay.m
My atv3 is brand new. I set it up, mirrored my screen, and then tried to airplay a show from HBO go. Error message popped up. Ive updated the system and then reset it.
-
When I try to share a photo via email, iPhoto begins processing, I get a message that iPhoto is preparing the photo for email. My computer then opens Mail, but then I get an error message under the finder. The error says "Mail Got an Error: Can't mak
-
Silent Install for Elements v.2
I work in a school environment and have an (old) site license for Photo Elements version 2. I want to deploy the program to specific computers and not have it included in my school image. Therefore, I need either directions to do this or a link to an
-
Hello, i want to create a development configuration. I use this guide from help.sap.com: http://help.sap.com/saphelp_erp2004/helpdata/en/e1/b8f23ea4b42e5ae10000000a114084/frameset.htm (it is in german) In step two a Track Configuration Wizard is ment