How I can forced close the Citadel Trace References

On my application I write data to Citadel traces using "Database Writing
VIs" (Open Trace.vi .. Write Trace.vi ... Close Trace.vi).
Sometimes if my application "crash" the Close Trace.vi is not executed and that's why the "trace references"
are NOT closed.
When start my application again I get error: "There is already an open writer for the selected trace."
This is natural because the references are not closed when application crash.
My question: How can I solve problem like this?
Is there any function on the Citadel Engine what I can use to "force"
close all writer references, reboot engine etc, get references already opened?
An attachments there is example VI and EXE.
Attachments:
CitadelTest-LV2011.zip ‏531 KB

Hello Mikko!
I can see that we have Services as NI Citadel 4 Service and NI Citadel 5 from Services in Administration tools. Can you try to restart them and see if the effect is something that you need. From then maybe we could try something out.
BR,
Make Nguyen
NI Finland Technical support.
Attachments:
citadel.png ‏151 KB

Similar Messages

  • What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • How can i Close the PO by changing the Qty to 6000 from 5.443,206???????

    Hi All,
    User wants the  PO with 240bags= 6000 Kg but the value is like this  240bags x 22.68kg  = 5.443,200 Kg(this is picking from material master in Alternate units of measure 100bags =2268)
    *As of now the PO status is:
    Ordered Qty: 240bags
    Delivery : 264.550 (User changed the Qty from 240 to 264.550 bags in delivery)
    PGI Qty: 264.550
    GR: 240 bags
    IR: not completed
    The fact is that they purchased 6000kg and they were able to add into the system just 5.443,206, and They need to add the rest into the PO:  556,794 kg (we have them in the warehouse)
    How can we do this?
    In order to close this PO they want to add remaining Qty
    i have tried to change the alternate unit of measure in the material master from 100bags=2268Kg to100bags=2500kg but this is not reflecting in the PO
    if i am trying to create a new PO the new AOU(to100bags=2500Kg ) is reflecting
    Please let me know how can i Close the PO by changing the Qty to 6000 from 5.443,206???????

    Hi,
    As per your posting i under stood the question like this.
    PO has been created for 240 bags which is 5.443,200 Kg ( As per the material master calculation).But user wants 6000kg.
    Delivery has been done for 264.550 bags at 100bags =2268 kg.Means 264.550*22.68 = 5999.94 almost 6000kg.
    And since PO is for 5,443,200 KG , GR has been made against this qty.
    At this stage please remove the new conversion change for the material since every transaction has been made against the PO it will not reflect.Also if there exists any transaction in pipe line will get effct due to this.
    Just change the PO qty to 264.550 bags and receive the GR for the remaining qty which is 24.55 bags .Sytem will allow this change.Also no need of additional Delivery or PGI. since already the PGI has been for 264.55 bags.
    Other wise if you want change the conversion factor for the material , please reverse the GR done and cancel the PGI at VL09 and delete the delivery and make the PO afresh and change the qty as per the 6000kg requirement and repeat the process.
    Please reply the result.
    Regards,

  • How can i close the preview in Adobe Viewer when the LINK ist fullscreen on my eMag? It will always go to URL and i can't open the summary.

    How can i close the preview in Adobe Viewer when the LINK ist fullscreen on my eMag? It will always go to URL and i can't open the summary.

    You have to change your page design so the link doesn't occupy the full screen of your content.
    Neil

  • Need help, please! how can i close the iexplore?

    Hi!
    i wrote a application, which start the internet explorer with the following code segment:
    /* cmd = 'rundll32 url.dll,FileProtocolHandler http://www....' */
    cmd = WIN_PATH + " " + WIN_FLAG + " " + url;
    Process p = Runtime.getRuntime().exec(cmd);
    it works very well, but now i would like to close the internetexplorer and this is my question. How can i close the iexplore?
    with p.destroy(), there is nothing
    please, can anyone help me?
    sorry, i hope my english is not to bad, i came from austria!
    mfg, volkmar

    I've found it.
    i can close all internetexplorer with
    Runtime.getRuntime().exec("taskkill /F -IM iexplore.exe");

  • How can I close the iOS Diagnostics window?

    When trying to solve a problem through Apple's support service a iOS Diagnostics app started and now I cant figure out how to close it. It's not in the recently used list of apps, but when I swype through the opened apps, it's always there.
    So my question is:
    How can I close the iOS Diagnostics window?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

    Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select the crashed app and force quit it. Then, open this app again.
    If you didn't save this document, it's possible that you lost the changes you made unless you have OS X Lion or Mountain Lion and they saved your document automatically

  • How I can force to Catalyst 3750G to work like SLAVE

    Hi,
    Help me, how I can force to Catalyst 3750G to work like SLAVE, I can't find the command..

    Hello Friend
    You have to set the slave switch's priority to be lower than the master switch.
    3750-Stk>show switch
    Current
    Switch# Role Mac Address Priority State
    1 Slave 0016.4748.dc80 1 Ready
    *2 Master 0016.9d59.db00 5 Ready
    This following link is a good read
    http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#pval
    Thanks
    Suresh

  • How i can force sql developer to show just tables of HR schema ?

    In sql developer we can filter the tables that it shows under table node ,
    how i can force it just to show tables of HR schema ?
    Thanks

    See my post in your other thread (How i can deal with DB schema in SQL developer ?
    In this case, you let only the HR user in the right panel.

  • How i can force a portlet of JSC to accept portal theme ?

    Hi
    Thank you for reading my post.
    is there any way to force the portlet to accept the portal theme ?
    for example i developed the portlet using JSC and it has blue them , now it should accept the them that portal administrator or user select from themes available in portal.
    so ,
    How i can force a JSC portlet to accept the portal them?
    Thank you

    Thank you for reply.
    is there any solution, workaround ,.... for now ?
    What about the time that a patch , fix come available ?
    is it in next one month ?
    without that portlet development does not go anywhere because people can not design a them for portlet and Portal separately.
    Thank you.

  • I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?

    I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?  Will the new one become less effective if it sits around too long?

    How much capacity is remaining on your current battery?
    Check your power status
    From the  menu: Hold OPTION and click System Information... èHardware è Power
    Copy and Paste in your reply.
    The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
    Long term storage (6 months):
    Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
    http://www.apple.com/batteries/

  • I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

    I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

    You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support  or  OS X: Changing or resetting an account password - Apple Support
    Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

  • I just updated iOS on my iPhone 5. What a shock!! Where is the premium look and feel I bought my iPhone for? If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone. Please let me know how I can return to the origina

    I just updated iOS on my iPhone 5.
    What a shock!! Where is the premium look and feel I bought my iPhone for?
    If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
    Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.

    You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.

  • How i can full fill the JTabbedPane  in the jpanel?

    i'm chinese ,i'm sorry for my poor English.
    when i add a jpanel to the jframe(the contentPane is seted to BorderLayout),the jpanel is full fill the jframe,
    but when i
    jpanel.add(jTabbedPane1,BorderLayout.CENTER );
    the jTabbedPane1's size is too small.
    my question is how i can full fill the JTabbedPane in the jpanel like
    jpanel in the jframe?

    post a small sample program that displays what you have described
    just a JFrame, containing a JPanel
    the panel contains a JTabbedPane
    the tabbedPane has 1 tab which contains a JPanel
    enough so that we can copy/paste/compile and run the program

  • How i can make in the same action 2 condition (check the exemple down)

    how i can make in the same action 2 condition (check the exemple down)
    this is an example and I really thank you for helping me(any body plz)
    http://www.2shared.com/file/DPpdgC_a/Exemple_Edge.html

    1. make each rectangle a symbol  (Symbol_1 and Symbol_2) and uncheck autoplay()
    2. Delete your code on the click event and put the following code in compostion ready:
    var toggle=true;
    function btnPlay(){
              if (toggle){
                        toggle=false;
                        sym.getSymbol('Symbol_1').play();
              else{
                        toggle=true;
                        sym.getSymbol('Symbol_2').play();
    sym.$('Ellipse').click(function(){
              btnPlay();

Maybe you are looking for