How i can install my plugin in Logic X?! please help meeee :( i can't install all plugin in logic
How i can install my plugins in Logic X?! please help meeee i can't install all plugins in logic....Logic is original
4GB of RAM
Display with 1280-by-768 resolution or higher
OS X v10.8.4 or later
Requires 64-bit Audio Units plug-ins
Minimum 5GB of disk space. 35GB of optional content available via in-app download.
Similar Messages
-
Wlserver.exe error occur while start the web logic server-please help
hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar -
my ipod shuffle wont sync, it says can not sync the required file can not be found??? please help.
if u can get your hands on a mac tis will work
http://www.youtube.com/watch?v=vfnXjV9p0pA&feature=related -
can somebody please tell me how to fix this. when i try to install appleworks this pops up
so please help me i need to get this on my macAppleWorks is a very old application and requires Rosetta to run under recent systems.
Lion does not include Rosetta.
If you browse this forum you will find many posts on this issue. -
How can I make my ipad work again please help
Hi I bought my iPad last year and it's been working fine. Today I was just going through the settings and it said there was a software update for IOS7 so I agreed to have it done, but I had no idea it was going to take so long (would be nice if they gave a heads up). I had to use my ipad for timely purposes so after a couple of minutes and what looked like only 2% complete, I tried to stop it and the only way was to turn off the device (no option to pause or stop!).
Now when I turned it back on it says I have to sync it to iTunes and won't go to any other screen. I synced it to iTunes (first time since I purchased it and my Cloud's memory has been full for months so I have no backup whatsoever of anything on my ipad - pictures, email etc. When I sync it up to iTunes it says that it detects a systems update in progress and I cannot continue until it is completed, would i like to continue. I thought I guess that's my only option so I said ok, but unlike when I did it wirelessly unsynced to iTunes earlier, now it is giving a warning that it will return my iPad to factory settings and erase anything I have on it when it completes installing the software!! No thank you!!!! Wish I had that warning the first time around, I have a year's worth of information stored on there that I do not want deleted.
Somebody please help, how can I get my iPad back to how it was before and stop this update nonsense ASAP??? What a way to ruin my Sunday Please help anybody who can.... Thank you. (and I don't see an option to back it up it just goes to the page to update the device in order to do anything else). Surely there must be a way!! Anybody??From your description it seems that you have to upgrade to iOS 7 now.
No one can say what state your iPad is in since you interrupted a very critical process!
It is perfectly normal that your iPad's contents are erased during the upgrade process.
All your data will be restored afterwards, if, and only if you have a recent backup of your iPad!
To restore your backup from iCloud follow these instructions:
http://support.apple.com/kb/PH12521 -
I can't install Lion because Macintosh HD can not use it as a startvolume. please help!
I can't install Lion because Macintosh HD can not use it as a startvolume. please help!
greetings from Austria ;Dhttp://www.apple.com/support/lion/installrecovery/
And this link for How to create Lion Recovery Drive just went MIA / "404"
http://support.apple.com/kb/HT4713
http://support.apple.com/kb/HT4718
You can also use the OS X Lion installer from the Mac App Store to create an external bootable drive, complete with a Recovery HD partition. See this article for more details. This approach will, at least, create a bootable drive with Recovery HD which you can carry with you in case you need to use Internet Restore or make use of the other utilities Recovery HD provides.
http://support.apple.com/kb/HT4649 -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.
Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :) -
Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?
Work through the suggestions in this article:
Mac OS X: Gray screen appears during startup -
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???
MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks
click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact
-
i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?
PS Here is a source for a keyboard. Try it if you have not done so already
http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
For questions about why Word doesn't do something, try
http://answers.microsoft.com/en-us/mac/forum/macword -
Please help if you can: I accidentally deleted the IPOD app for my IPAD 3. I need it to enable HOME SHARING. How can I restore or reinstall it? It is not an app I bought, it came on the IPAD from Apple
See These Support Articles for Home Sharing
Understanding > http://support.apple.com/kb/HT3819
How to > http://support.apple.com/kb/HT2688
Troubleshooting > http://support.apple.com/kb/TS2972 -
I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1
Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons. -
i do not remember my password of filevault and i can not install some softwares on my mac please help me
Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on
Maybe you are looking for
-
Difference between Condition: Good and Condition: Normal?
I just got my Macbook in June, and it has already changed in my Power options from Condition: Good to Condition: Normal. The stats are: Charge Information: Charge remaining (mAh): 4230 Fully charged: Yes Charging: No Full charge capacity (mAh): 4262
-
Error while using implicit remoting from Win 7 Client
Anyone who can help with below error while implicit remoting in exchange 2010, i have verified WinRM service, and currently using power-shell v2 both on client and server. Error Code: Connecting to remote server failed with the following error messag
-
How do I get the Recovery partition onto a DVD set from my solid state drive?
My Pavilion dv6 has only a solid state drive. I need to recover and reuse the 23 gb currently partitioned for recovery. To do this I need to move the recovery files off the drive. Can this be done? Where do i find instructions on how to do it? Th
-
[Feature Request] Wap321 SSH/Telnet Support
Dear Cisco Developers, we are facing a problem with your design choice of not to support Telnet/SSH on the Wap321. We bought this Product because it was one of the only Access Points with SSH and Telnet Support. We need the SSH Support for a script t
-
Workflow for Particular Role(Only) has to qualify the lead.
Hi all, The lead(s) has to be qualified by only one role, and lead(s) should be converted with the other role. How this can be done. For example. Here "sales & Marketing Manager" has to qualify the lead and no permission to convert. Here "admin" has