How I can make one order analyze from one waveform?

I have one file waveform with two data, first with analog pulses of the rotation and the one other with the vertical acceleratin. I can make an order analysis and the waterfall. I only obtain to separate the data in two waveforms and make fft?

I am not sure that I understand your question. This is what I am getting. You have two waveforms stored in a file. You can read them back in and do an order analysis and a waterfall, but not an FFT because you cannot separate the waveforms from each other. Is this correct? If so, how are the waveforms bundled together? Are they built into an array or are they interwoven with each other? We are going to need a little more information to help you out on this issue. Maybe you can post the file and how you are reading it in?
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Similar Messages

  • Jamesgang , how do I Get a password for Laptop so no one can make are take drives from Laptop?

    Cardriver

    Jamesgang wrote:
    Cardriver
    Re: Jamesgang , how do I Get a password for Laptop so no one can make are take drives from Laptop?
    What do you mean get password so no one can make or take drives from laptop? This is confusing as to what your saying or asking?
    Passwords if you don't write it down or remember how it was written will be good or bad for you if you forget it. So don't just think it will lock others out - you can also lock yourself out as well. Rather you should keep your laptop in a safe place where you have access to it and no one else and only put password on it when you travel or if another members wants to use it you password block the Admin/Main user but make them a Limited user account that way they have no access to your important files.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Hi! I just bought a new iPhone and I was wondering how i can make sure all my pictures and music will be transfered from my old iPhone to my new one?

    Hi! I just bought a new iPhone and I was wondering how i can make sure all my pictures and music will be transfered from my old iPhone to my new one?

    Pictures are held in the iPhone backup. If you backup the old device just prior to the activation of the new one, then restore from that backup, the photos will be there. Music is in iTunes on the computer and when you do the restore, it will download the music from iTunes to the device during the restore. Make sure any music purchased on the iPhone that has not been transfered to iTunes on the computer is done before beginning the restore.
    You can also view information in this support document http://support.apple.com/kb/HT2109

  • How i can make forms read form nls and reports read from anather

    hi evrey one
    how i can make forms read form nls_lang and reports read from anather nls_lang ,
    I think that this property is found in the file format .ini,
    I forgot his name,
    Is there one has found this information,
    pleez share.
    thanks.

    At a minimum, the creation of the TcpClient will need to change its parameter to the name of server you want to use:
    TcpClient tClient = new TcpClient("gmail-smtp-in.l.google.com", 25);

  • How we can remove  one authorization object from multiplt roles

    How we can remove one authorization object from multiplt roles

    > Correct me if I am wrong !!
    O.K., Here I go
    > But if the object is maintained in SU24 and if you use Expert mode for generation of the role then again those objects may be pulled.(make sure you never use expert mode once you delete the objects)
    Actually using expert mode and choosing 'edit old status' is the only way to avoid objects being 'pulled in' after menu changes.
    > As jurjen said, you may download the tables and instead of deleting the object from the excel sheet, change the value of the object in column "DELETED" = X, by doing this only the objects get inactivated(but remain in PFCG).
    I am not speaking of downloading tables but about downloading roles from PFCG. This will not get you a spreadsheet but a flat textfile. If you whish to set the object status to deleted you'll have to swap the space on position 207, right behind the 'U, S, G' flag,  with an 'X' for all corresponding lines.
    Jurjen

  • How we can import an IDOC structure from one SAP system to another w/o ALE

    Hi Gurus,
    How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
    Any response will be awarded!
    Thanks a lot.
    Samson

    hi,
    1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
    2.By executable program also like bd10 and bd11.
    Regards,
    SHIVA(reward if helpful).

  • How we can import an IDOC structure from one SAP system to another

    Hi Gurus,
    How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
    Any response will be awarded!
    Thanks a lot.
    Samson

    hi!
    Define the logical system names in both the systems.
    Logical system names :SAP001
    SAP002
    SAP001 FOR 001 CLIENT
    SAP002 FOR 002 CLIENT
    These two logical system definitions should be present in both the systems.
    Assign the logical systems to the client. (in both the systems)
    Assign SAP001 to 001 CLIENT
    Assign SAP002 to 002 CLIENT
    you can See these in transaction SALE.
    After this define the rfc DESTINATION IN sm59. (in both the systems)
    In 001 client create the RFC destination name SAP002
    In the tab log on security, give the user name and password and client of the 002 client and save it.
    Similarly do the reverse in the 002 Client.
    In 001 client create the port.(Transaction WE21)
    Specify the RFC destination name as SAP002.
    Now you can define the ports, (both the systems)
    Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
    partner profile in both the systems.
    Now create the distribution model in BD64 and goto edit>model view>distribute.
    The same model view will be visible n distributed to the partner system also..which in this case is sap002.
    U may trigger the idoc from we19 and chk its status in we05.
    Please let me know if you need further info on this.

  • How i can make multilanguage application .. take his vlues from database

    How i can make multilanguage application .. take his values from database
    and can change labels of massages , buttons ,text fields and name of columns in run time
    in jdevelpoer11g
    great thank

    Hi,
       I think that there is not a standard support for retrieving multilanguage texts from database in ADF. What we did is to implement our own ResourceBundle that retrieves the translated text from custom database tables. We also introduced a cache for optimizing the access to the translations.
    I hope this can help,
    Juanjo

  • Whit the new iTunes how i can down load my pictures from the iPhone to the computer  to make more spaces

    whit the new iTunes how i can down load my pictures from the iPhone to the computer  to make more spaces

    Hi shadibader,
    I understand that you wish to import your photos onto your computer from your iOS device. Here is an article for you that will explain how to accomplish this:
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
    http://support.apple.com/en-us/HT201302
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How do I make one account's home folder visible to the other?

    How do I make one account's home folder visible to the other? Also, when I begin to delete an account, it asks if I want to either delete its home folder, keep it in the users folder, or save it in a disk image. I want to be able to see it from my remaining account once I delete it, so if I leave it in the users folder, would I be able to see all the files (right now I can't

    Use terminal to add ACL to the account,
    at the prompt:
    sudo chmod -R +a "<user> allow list,addfile,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr, writeextattr,readsecurity,file_inherit,directoryinherit" /User/<user_name> #yep, all that goes on one line!#
    #Replace <user> with the user name that you want to have file/folder privileges#
    #Replace <user_name> with the account you want to process#
    example:
    sudo chmod -R +a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
    /User/joe
    #sue now gets full access to joe's files and folders#
    to remove:
    sudo chmod -R -a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
    /User/joe
    You can add as many users as you want! Just lather, rinse repeat. That is how I share my itunes
    directory with the ones I want to share it with.
    That's the simplest way. ACL permissions overrule posix permissions.

  • How do I make one (and only one) device use my Apple ID and iCloud account?

    How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

    If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out.  If you only want to stop using iCloud email, just uncheck Mail.  To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out.  To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
    On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off).  For FaceTime, go to Settings>FaceTime, tap the ID and sign out.  For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

  • We have 3 locations coming up for our TV listings how do we make one the default and stop others?

    We have 3 locations coming up for our TV listings how do we make one the default and stop others?
    There is Bed Room, Living Room and Family how can we make ONLY FAMILY COME UP?
    When we check the listings or record from the TV Listing the LIVING ROOM comes up and only the Family has the controls to record.
    THANK YOU.
    Solved!
    Go to Solution.

    Please provide more details.
    What equipment do you have?
    Where do you see this listing? On STB? Online? Verizon App?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How i can make  my own connection in java source of a jsp page

    How i can make my own connection in java source of a jsp page (How to get connection from JNDI datasource address) ?
    imagine that i have a rowset in a web page , now i want to do some operation using
    plain JDBC , so i will need a connection object.
    I tried to get one of my rowsets connection but it return null ?
    what is best way to retrive a connection from JNDI datasource that we define for our project?
    for example if i have
    myRowSet.setDataSourceName("java:comp/env/jdbc/be");
    in web page constructor
    now i want a pure connection from the same datasource ? JNDI
    Thank you

    It is not hard to get your own connection from datasource.
    in your case you need to do like the the following code.
    i provide sample to show you how to catch the exception and create an statement .
    Connection con =null;
    try{
    InitialContext ctx = new InitialContext();
    DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/be");
    con = ds.getConnection();
    java.sql.Statement st =con.createStatement();
    }catch(SQLException sqlex){
    sqlex.printStackTrace();
    sqlex.getNextException().printStackTrace();
    catch(NamingException nex){
    nex.printStackTrace();
    hth
    Masoud kalali

  • How we can make use of cache management using presentation services

    hi all
    how we can make use of cache management using presentation services
    Thanks
    Sreedhar

    hi
    i have one small question,
    first time i have submitted a report and the data has come from database, second i have interchange the cols like col1 to col2 and col2 to col1 and i did col1/col2 will it comes from cache or will it come from database(my question is that any in memory calculations will be done by cache )
    Thanks
    Sreedhar

  • How do I make a phone call from my mac with yosemite?

    How do I make a phone call from my MacBook Pro on the Yosemite operating system?

    The following quotation is from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    There is more information in the link, including supported hardware and that you must have Settings > FaceTime > iPhone Cellular Calls set to on on the iPhone.
    Phone calls
    With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
    To make and receive phone calls, here's what you need:
    Sign in to the same iCloud account on all your devices, including your Mac.
    Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
    All devices must be on the same Wi-Fi network.
    All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
    Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
    Make a call
    To make a phone call on your Mac, iPad or iPod touch tap or click a phone number in Contacts, Calendar, or Safari.

Maybe you are looking for