How I can removed "Codebox"  i cant find in my mac?

Hey everyone, I was on the mac app stor when I checking my updates for updates and saw a update for "CodeBox" I search it. I DON'T OWN IT!!! Has anybody else had this? when i try to updated its ask me for unknow apple ID,  I don't want to update for fear i'll have to pay the $10, but I also dont't want the little red circle on the icon. HELP!! Can anybody know how to fix it?

This community is about older Mac OSs. Try these links for a better response.
OS X Mountain Lion
MacBook Pro

Similar Messages

  • HT201441 What happend if i can't contact the previous owner??? How I can remove it from previous owner's account???

    What happend if i can't contact the previous owner??? How I can remove it from previous owner's account???

    cmoorcroft wrote:
    What happens if the previous owner refuses to to give me his password for me to delete it/ do the instructions?
    The previous owner doesn't need to give you their credentials. They can release the device via Find My iPhone on iCloud.com as per the instructions in the link I posted in my initial response: Find My iPhone Activation Lock: Removing a device from a previous owner
    If the previous owner is not present
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
    Sign in to their iCloud account at www.icloud.com/find.
    Click All Devices to open a list of devices linked to their account, then select the device to be removed.
    Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
    When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device is erased and removed from the account, you can proceed with the device setup process.
    If the person you bought it from refuses to do this, I would assume the device is stolen and I would demand a refund and/or contact the authorities.

  • HT4061 My iphone 4S was lost. How I can remove or block my iphone on distance?

    My iphone was lost. How I can remove information from my iphone 4S on distance or block?

    If you had "Find My iPhone" enabled in Settings > iCloud then you may be able to locate it, lock it, send a message, make a noise, or erase it. If not, you cannot do any of these.
    If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPhone" has not been disabled on it. Note: Disabling "Find My iPhone" is much more difficult in iOS 7.
    If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    See also here for additional information: http://support.apple.com/kb/HT5668

  • HT1918 how i can remove credit card from my acaunt

    how i can remove credit card from my acaunt

    Songs that you downloaded to your iPad before playing them can be removed by swiping across the song title and tapping Deleted.  Music that you played without downloading them can only be removed by turning off iTunes Match in Settings>Music (which will remove all the music from your iPad).  Then you can turn iTunes Match back on again and download/play the music you want again.

  • HT4993 i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

    i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • HT1937 I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    Hi Broken Smoke,
    Welcome to Apple Support Communities.
    You can change the iTunes Store information associated with your Apple ID, and select None as your payment option. See the steps in this article for help:
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    Changing your account information using an iOS device:
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    To update your name, billing address, or payment information, follow these instructions:
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when finished.
    Have a great day,
    Jeremy

  • How we can remove  one authorization object from multiplt roles

    How we can remove one authorization object from multiplt roles

    > Correct me if I am wrong !!
    O.K., Here I go
    > But if the object is maintained in SU24 and if you use Expert mode for generation of the role then again those objects may be pulled.(make sure you never use expert mode once you delete the objects)
    Actually using expert mode and choosing 'edit old status' is the only way to avoid objects being 'pulled in' after menu changes.
    > As jurjen said, you may download the tables and instead of deleting the object from the excel sheet, change the value of the object in column "DELETED" = X, by doing this only the objects get inactivated(but remain in PFCG).
    I am not speaking of downloading tables but about downloading roles from PFCG. This will not get you a spreadsheet but a flat textfile. If you whish to set the object status to deleted you'll have to swap the space on position 207, right behind the 'U, S, G' flag,  with an 'X' for all corresponding lines.
    Jurjen

  • In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    Did you set any restriction?
    Settings>General>Restriction

  • I want to remove google share bar when we open gmail, all other browser take normal look, it's very uncomfortable look.how i can remove this ?

    I want to remove Google share bar when we open Gmail, all other browser take normal look, it's very uncomfortable look.how i can remove this ?

    Is this the problem?
    How do I disable Bing?
    If you just want to use a different search engine it's easily selected:
    ... but I sense this is not what you're asking.

  • Please can some one tell me how I can remove an ex boyfriends account from my iPad ? I want it update my updates but his email address always comes up and not mine

    Please can some one tell me how I can remove an ex boyfriends account from my iPad ? I want it update my updates but his email address always comes up and not mine

    Press and hold any of the apps on your iPad's homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' in the top left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'.
    Note that deleting an app will delete all of its content as well

  • How do I remove my App store information from a Mac about to be sold

    How do I remove my App Store information from
    a Mac about to be sold ?

    Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
    Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    Reset the PRAM and the SMC, which might contain personal information.
    If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    If you activated FileVault in OS X 10.7 or later, turn it off.
    If you use Boot Camp, the partition must be deleted.
    If you created any other data partitions on the internal drive, remove them in Disk Utility.
    Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

    How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

    Mac Pro tower can support drives up to 4TB is size.
    If running 10.8.4, 10.8.5 or 10.9.0, there is a bug in Disk Utility that precludes proper erasing of drives over 2.2TB as Internal drives

  • Please advise how I can stop all old email messages from my mac transferring to my new iPhone

    please advise how I can stop all old email messages from my mac transferring to my new iphone5 every time I open up email on it.

    Try Here... iPhone User Tip: Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • My i phone is looked on i cloud how i can remove it

    i buy a iPhone 5s but i find it is looked on iCloud how i can open it

    If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
    If not, you can't activate the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
    (114675)

  • How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

    hi.
    I am working myself with computers ,  so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
    because I had before totally black screen and the problem was damaged processor.
    I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
    how  you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
      because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
    so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because 
    it is working with heat sensors then I know that the motherboard is healty. but it didn't work. 
    I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
    tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
    I know that the power supply also can cause dead pc but I know how to solve a problem  with dead power supply. and I want to keep away power supply from this question. please do not tell me that  Idon't have to pull out processor
    because I am a technician and both of my computers are doing very good after this experiment.
    thanks
    johan
    h.david

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

Maybe you are looking for

  • Error 2001 on iPhone5 running newest OS , how to solve issue

    All of a sudden my iphone5 went black when charging just shows blinking apple sign. With help form web forum i put phone in DFU mode and went to Itunes . Phone plugged in running dfu shows itunes connection.\ Itunes (latest version) asks to restore p

  • Delivery completion indicator

    What is delivery completion indicator ? Is there any standard report to find all open purchase orders (PO for which entire quantity is not yet received )?

  • Thinking about getting a time capsule.  Difficult to set up?

    Thinking about getting a Time Capsule.  Difficult to set up?

  • Query incremental size from previous incremental 1

    Hi All, Is it possible to query a view in the DB to find the incremental size in a DB? Trying to figure out how many blocks/data is changed between now and my previous incremental 0 or 1 backup (how big the next backup will be). Thanks,

  • Sdo_geom

    HI I am working with Oracle 11.2.0.1.0. The following query gives incorrect result. There are two geometries, they are DISJOINT but the query says that it is INSIDE select sdo_geom.relate(a.geometry, 'determine', b.geometry, 0.05) from test a, test b