How i can route the traffic based on destination address ?

Dears,
As you can see in the image i have two different setups.
ISP A setup is completely dedicated for Production & ISP B setup is dedicated for whole staff internet.
Below is the network information;
Firewall:
GigE0/0 - PUBLIC IP (PAT)
GigE0/1 - 192.168.0.1/24 no dhcp
ISP B Router:
ATM 0 - PUBLIC IP (PAT)
FaE0/0 - 192.168.0.2/24
FaE0/1 - 192.168.92.1/24 dhcp
Servers - 192.168.0.xxx/24
Clients - 192.168.92.xxx/24
All the clients have internet access through ISP B.
If a client wants to connect to any of the server, what kind of configuration is required on ISP B rotuer. I though of route-maps or doing a static routing between Firewall & ISP B Router but i am not sure which is the best practice to do so.
Kindly suggest with some suitable solutions.
Regards
@Mohammed

Hi Shareef,
Below is the example of PBR.
ip access-list extended Redirect_PBR
permit tcp host 192.168.92.10 host 192.168.0.10 eq 443
permit tcp host 192.168.92.10 host 192.168.0.10 eq 21
etc
route-map Client_Server permit 10
match ip address Redirect_PBR
set ip next-hop 192.168.0.1 (Server LAN)
int Fa E 0/1
ip policy route-map Client_Server
You can have the required filtered rule created as an ACL... you can restrict how ever you wan't. Map that ACL to the route map and set a next hop to needed routing point. Then finally map that ACL to the interface of the router. In this case every traffic mentioned in route map and access-list will follow the PBR rule. All other traffic will route as usuall with the default route.
Hope this helps
Regards
Karthik

Similar Messages

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well...

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

How i can generat the ".top" file at ultiboard

Hello
how i can generat the files of our pcb design like " .top " file to use it for making our bourd by the machine

I assume you are talking about exporting gerber files and NC drill files. Go to File >> Export and you can select one of the options...
a) Select one of the Gerber RS274 options, then click Properties, here you can select which layer you want to export. Based on your comments, you are looking for probably Copper Top, Copper Bottom... but maybe you may want to export also the Board Outline, Silkscreen Top and Bottom, etc. It will depend on your board manufacturer which files they need. On you have configured which layers to export, then click OK and you are back to the Export dialog, now click the Export button and it will start exporting.
b) For the .drl and .rep files, in the same Export dialog, select NC Drill, you can then select Properties to configure it, or Export to create the files.
Nestor
National Instruments

How we can get the Trial balance in other currency -USD now.

Hi All,
I have an issue reg: My client had gone live in 2005 and only One Currency is defined u201CINR u201D as company code currency and Controlling area currency.
Controlling area settings are maintained as: Controlling Area Same as Company Code and Currency Type maintained is: Company code currency u2013 INR.
Even in OB22, No parallel currencies (Group currency, Hard currency, Index based currency, Global company currency) are defined.
Now, my client is asking to have the Trial Balance (F.08) in currency u201CUSDu201D,but at present we are getting it is "INR" only.
Is it possible to get the Trial balance (F.08) in USD , for the previous posted document values(They did all the postings in INR only)
How we can get the Trial balance in other currency -USD now.
Please suggest and guide.
Thanks in advance
Regards,
Sudha.

Hi,
First you need to enter USD as HARD CURENCY for your company code's country settings.
Then in OB22, for your Company code, enter Currency type 40 as additional local currency (LC2)
Legal Valuation
Exch rate type M
Sour Curr 1
TRs Date Type 2 ...and now save.
By making these changes, you will be getting F.08 in USD by specifying currency type as 40 in the selection screen of this report.
The only thing you wont get here is that.............you cannot determine USD values for documents, which are already posted into the system.
For the time being...you can use report S_ALR_87012279 - Structured Account Balances....in this selection screen enter USD as output currency, tran key date and exch rate type M....to get the LC values to be converted into USD during this report only. (this is as good as fast food)
As suggested above, use of special purpose ledger is all together a different concept....you dont need to go for it.
Regards,
Srinu

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

Rescheduling of Maint order..(how we can postpone the date of maint order)

Hi friends,
I would like to know that how we can postpone the date of maint order.I am working on preventive maintenance plan.Let consider my maint plan is based on key date so that system is generated orders like for 90 dyas cycle time as below.
10 jan
10 feb
10 mrach
But suppose there is certain req.from sales dept. so production dept want to use the machine. So machine is not available on that day (10 jan) but it will be free after 2 days for maintenance .Then I want to know
1.how i can shift the order date from 10 to 12 jan.
2.What about the planning cycle? It remains constant as per system date or it will change proposed date automatically.
Awaiting for reply..
Thanks and regards,
Pravin

Hi,
If automatic scheduling is active,
In case of backward scheduling (default for preventive maintenance) change the the basic end date
In case of forward scheduling change basic start date.when the order is saved order will be rescheduled automatically.
You can avoid the shift of next mainteannce call by giving proper scheduling parameters in Maintenance plan.

How we can get the current running user information in BusinessOne

Hi experts,
How we can get the current running user information in BusinessOne Application,
Based on the user details i want to assign some functionality,
Regards,
Saidarao yakkala

Hi,
As per me you can't get detail by server side.
If you want to know who are connected then you can use sp_who2 procedure in SQL query.
That will display who are login.
For more detail you have to check LOG file on client side in SAP B1 > Log folder.
Thanks
Kevin

How we can get the current login user information.

Hai Experts,
How we can get the Curren Runnig user, while running the application,
I tried the below one, but it was not working,
Dim s As String
s = objApplication.Company.UserName
Regards,
Saidarao yakkala

Hi.
Are you try to get and present current user name in workbook or WAD ?
You may use user exit variable based on sy-uname.
If you run WAD you may use built webitem info_field and show current user name.
Regards.

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How i can install the whatspp,facebook,and viber to my i phone 3g?

How i can install the whatspp,facebook,and viber to my iphone 3g?

You can't. Buy a new phone.

How we can replace the column in Core Table plz see this msg

Hi,
How we can replace the column in Core Table plz see this msg
Req:
when i push the Insert button the data inserted into the Table
like
Cols Values
FOCD      CUFZ14
PRDCD FU6
Month 082008
AgencyCD AG02
PLAN 123
This is FO_Plan Table....
Requirement:
i need at table show to replace the Prd_CD to Prd_Desc while inserting the above Row....
There is no Prd_Desc in FO Plan Table....
Prd_desc comes from Product Table.
did u get my point...
how to solve.
Thanks
Ram
Edited by: Ram Vungarala on Sep 24, 2008 9:09 AM
Edited by: Ram Vungarala on Sep 24, 2008 9:15 AM

Hi,
I'm not sure if I understood what are you trying to do. But you can modify your table in a backing bean code. JSF page code for a table:
<af:table id="product_search_results_tbl" binding="#{backingBean.boundTable}" ... />
And a backing bean code:
import oracle.adf.view.faces.component.core.data.CoreTable;
public class YourBackingBean {
    private CoreTable boundTable;
    public void setBoundTable(CoreTable boundTable) {
        this.boundTable = boundTable;
    public CoreTable getBoundTable() {
        return boundTable;
   public String insertButtonAction() {
      // Bind your button action to this method and modify here your bound table
     return null;
{code}
Look for column modification methods in a CoreTable class documentation.
Marius

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How i can route the traffic based on destination address ?

Similar Messages

Maybe you are looking for