How I can set a keyboard lock for my nokia X6 ?

i want to lock my phone not just by the side lock but also want to type a code so that nobody can view my phone contents without putting the lock code.So how can i set a lock code on my phone?
Solved!
Go to Solution.

No need to install a separate app or use the Ovi store...
Instead goto:
Menu > Settings > Phone > Phone mgmt, > Security > Phone and SIM card > Phone autolock period
Set the autolock time as you want, the phone will ask you for the security code... Default security code is 12345 and you can change that under Lock code.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Similar Messages

How do I set the keyboard shortcut for zoom tool to be r-clicking the mouse?

I want to have the r-click of my mouse be the zoom tool like in Quark Xpress. Can I make the Z shortcut to choosing the Zoom tool instead a r-click? I know how to get into keyboard shortcuts - just dont know what to type in for the new shortcut to make it a r-click. right now its 2 steps to zoom rather than in quark 1. not that I want to go back. lol.
also, while were talking about migration differences and extra steps, is there a way I can hide guides and set overprint preview in one step? (this is something I do often and was just a simple F7 in quark)
so these are just 2 things that take 2 steps in ID but one in quark. not that I want to go back. lol

OK, I've been doing this since CS2 with no need for a script. To hide guides and show preview...
1) Go to 'Keyboard Shortcuts'
2) Go to 'Product Area - Tools'. Yes, you'd think it would be in Views! But the buttons for this is at the bottom of the Tool Bar.
3) Go to 'Commands: Toggle view setting between default and preview'
4) Click your cursor inside 'New Shortcut' and hit the key you want or type it in. I choose the unused F2 key
5) Click the 'Assign' button and you are set. Hit the key to switch back and forth.
As for your mouse Zoom, use Power Zoom as described above or just hold down the Alt/Option button in 'Hand' mode and use the scroll wheel to zoom in and out. Not one step but it works!
Now you won't miss Quark at all!

How I can set the spelling language in Pages for iPad?

how I can set the spelling language in Pages for iPad? may for german...

how I can set the spelling check to other language in Papers/iPad?
The only choices you have in the iPad itself are to change the keyboard or change the user interface language. If that doesn't do what you want, probably best ask the people who make Papers.

How I can set my Iphone 6 to make it lock after 4 hours

On my Iphone 5c under IOS 8 I can set the auto Lock after 4 hours. I do not find this option on my Iphone 6 (only lock immediately). Whenever it go to sleep mode (after one minute according to my setting), I have to redo the code or use the fingerprint of the home button. Any idea about this?

Thank you for this information. By following your method I realized that this setting is available only if the unlocking with fingerprinting function is disabled. Is this is a bug or a feature on Iphone with the fingerprint home button?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

Upto how much I can set maximum Heap size for jvm?

I am running application on 8GB RAM Windows 64 bits machine.
I am running out of OutOfMemory (Heap Space). I want to increase the Heap Size for my jvm.
But can anybody please tell me what is the limit by which I can set the maximum size for heap?
Thanks in Advance,
Jenish

Max allowed memory per process is 2 raised to the 64th power. What maximum memory you can set depends on the memory available
for your application. You may be able to set more than 8GB ram then it will use the swap space and it will slow down your application
performance. So try different memory size and see which one works best for your application.

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

HOW DO I SET UP MY FAX for a HP PHOTOSMART PLUS B210 ?

HOW DO I SET UP MY FAX FOR A HP PHOTOSMART PLUS B210 EPRINTER ?

Hi shea31,
Unfortunately, this printer doesn't have a fax function. You can also check the printer's product specifications.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

How to dynamically set a bounded value for a VO at runtime

Hi all,
I am working on a custom page for time card summary, the VO's query like this:
select Timecard_Id,.... from timecard_summary where supervisor_id = :1
There is a utility that can retrieve supervisor_id from system, but I don't know how I can set this supervisor_id before the query is execute, I think I need a controller to do that right after user clicks "Go" button in simpleSearch Panel, but I cannot find the way to determine if the "Go" button in simpleSearch Panel is clicked.
THanks
-Bill

Hi Sumit,
I had tried over riding the initquery and execute query to meet the same requirement but the where clause i was setting wasn being set since the execute query somehow was making it null.
When i did hard code the whereclause params in the the executequery(),it worked fine but then i couldn have passed any variables.
Then finally i went around the oaf guide and found something like ,
dic[]=getcriteriaitems.... and it solved the purpose for me.

How I can set the Non-standard option of -Xmxn of jvm

Hi there,
Can any one tell me how I can set the Non-standard option of -Xmxn of jvm (setp by step).Iam using Sun's jvm(jdk1.2.2).Iam facing a error(java.lang .OutOfMemory).I want to set the maximum size of the memory allocation pool.Any help will be highly appreciated.
Thanks for ur valuable Time
Bikash

you can use the following sample options to specify memory size.
EX:java -Xms128mb -Xmx512mb myClassFile

How i can set size of editor at runtime?

dear all,
How i can set size of editor at runtime?
The size of editor is good when I run form on windowX but so small on web . why? have any body call tell me how i can do?
thank for advance

Hi there,
You can use the builtin EDIT_TEXTITEM.
You can pass x-pos, y-pos, width and height as parameters to that.
Hope this helps

How i can set dropDown item to 6th item from java code ?

Hi
Thank you for reading my post.
how i can set dropDown item to 6th item from java code ?
i have the value field of database and i can use it to set selected item of DropDown.
so : can i use value field to set the selected item ?
Thank u.

Hi,
Please go through the following thread which discusses about setting teh selected item for a dropdown:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=50697
Hope it helps
Cheers
Giri

How I can set a keyboard lock for my nokia X6 ?

Similar Messages

Maybe you are looking for