How I Can Specify JDeveloper Location to Install BI Beans?

Hi Gurus, as others I am also new in OTN, I downloaded JDeveloper 10.1.3.10 and BI Beans and installing "Custom Option".
I unzipped JDeveloper files on C:\Oracle\JDevStudio\
During installation BI Beans on "Specify JDeveloper Location to Install BI Beans" page giving above path raise an error message "The JDeveloper was found is at your specified location is an unknown version. Please specify a full path to a supported version (10.1.2 or higher) of JDeveloper". Whereas I am using JDevelper (10.1.3.10). How I can solve this problem?
I will be thankful to you on your cooporation.

Did you receive any response to your question? I
have a customer running into the same issue.http://www.oracle.com/technology/software/products/bib/download.html
Important: You must install Oracle JDeveloper 10g 10.1.2.2 build 1929 prior to installing BI Beans 10.1.2.2. JDeveloper 10.1.2.2 is available in JDeveloper Archives. Note that JDeveloper 10.1.3 is currently not supported.

Similar Messages

HT5594 How I can turn online location Services on ?

How I can turn online location Services on ?

Hi Al-Amri
Welcome to the Support Communities!
You referenced the current article regarding how to use Location Services on your iPhone, iPad or iPod touch:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594?viewlocale=en_US&locale=en_US
Turning Location Services on or off
You can turn Location Services on or off at Settings > Privacy > Location Services. You can turn Location Services on either during the Setup Assistant process or later through the Location Services setting. You can turn it off if you don't want to use this feature or to conserve battery life. You can individually control which apps and system services have access to Location Services data.
Cheers,
- Judy

Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as develope

Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to

If you have a beta copy of iOS6
1. You are a developer and will know how to transition from beta
to release version and to use the Develpoer forum
2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
try Google

How do I specify file locations in a structure application?

I want to export a structured Frame file to XML, using a structure application that I create. I have a DTD, a read/write file, and a template file, all stored on a network drive. I would like to specify the locations of these files using the notation \\MyServer\folder\...\folder\name.dtd, etc to make the application independent of the drive mapping. I can do this for the read/write file and the template file, but FrameMaker complains when I specify the DTD file in the same way. If I change the path for the DTD file to be R:\...\folder\name.dtd, then FrameMaker does not complain about it but apparently sees the read/write and template files just fine.
Why is this? Am I doing something wrong in the path specification?
I am using FrameMaker 9.0.3 on Windows XP with all service packs.
Thanks,
Van

David,
Yes, I also used the form K:\folder\...\name.dtd, and it works. The problem down the line is that FrameMaker inserts that text into the <!DOCTYPE ... > element, which is normally OK; however, when I open the file in Dreamweaver, DW changes the statement to <?DOCTYPE ... ?>, which is the incorrect form. Subsequent testing indicated that Dreamweaver did this because of the colons, as in K:. Why? I do not know, except maybe Dreamweaver is making some assumptions about what it expects to see in the file.
Michael,
I tried changing the backward slashes to forward slashes, but that did not work also. But in that process, I discovered that the problem was due to spaces in the names of the folders and file names. Replacing the spaces with %20 did not work, but removing them or replacing them with underscores DID work.
So, now I have the locations specified with BACKward slashes and NO SPACES in folder and file names. This works just fine. Moreover, FrameMaker creates a doctype statement with FORWARD slashes in the path name, which is more universal.
So, for the time being, I am very happy.
Thanks for your help,
Van

How do I specify the location of my aperture file?

I don't have space on the Macbook for all my music and aperture library so i have the photos on my MacPRO. Now i want to sync some photos to my ipod and appleTV but i cannot find a way to specify where the aperture file is.
I can find a way to point to the aperture folder, but not the file.
Anybody got any ideas please?
Cheers John

Silly me Just double click the aperture library and hey-presto!!

How do I specify the location of log4j.log?

I want to create the log4j.log file in "C:\TEMP\" for Windows and "/tmp/" for linux. Is there anyway that I can do to that?
Here is what I currently have for my log4j.properties:
# SET ROOT CATEGORY PRIORITY TO DEBUG AND ONLY APPENDER TO A1, C1, R
log4j.rootCategory=DEBUG, C1, R
log4j.appender.C1=org.apache.log4j.ConsoleAppender
log4j.appender.C1.layout=org.apache.log4j.PatternLayout
log4j.appender.C1.layout.ConversionPattern=%d [%t] %-5p %c %x - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
#Create the file in Windows
#log4j.appender.R.File=C://TEMP//log4j.log
#Create the file in Linux
log4j.appender.R.File=/tmp/log4j.log
log4j.appender.R.MaxFileSize=15000KB
# KEEP FIVE BACKUP FILES
log4j.appender.R.MaxBackupIndex=5
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%d [%t] %-5p %c %x - %m%n
#log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%nThank You,
Chris

Here is another configuration file that uses multiple appenders.
log4j.rootLogger=debug, stdout, R
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
# Pattern to output the caller's file name and line number.
log4j.appender.stdout.layout.ConversionPattern=%5p [%t] (%F:%L) - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=example.log
log4j.appender.R.MaxFileSize=100KB
# Keep one backup file
log4j.appender.R.MaxBackupIndex=1
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%nIn addition, as the root logger has been allocated a second appender, output will also be directed to the example.log file. This file will be rolled over when it reaches 100KB. When roll-over occurs, the old version of example.log is automatically moved to example.log.1.

I can't boot from OS install USB drive Mac Mini Model 1176

How I can't boot from OS install USB drive, Mac Mini Model 1176

Thank you Eustace Mendis for your answer.
I rebooted the Mac Mini holding the Option key down but it doesn't work. I used an USB drive with O.s 10.7 from Apple that I have used previuosly with other computers and I also tried with a CD install O.S 10.6
It seems that the Mac Mini can't recognize the keyboard inputs and I tried with 3 different keyboards but still didn't work.
I also reset the SMC and PRAM but I had no luck. Any clues?

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

How can I do a clean install after doing an update using a volume purchase license?

My question is this: We purchased 20 licenses of Lion through the Volume Purchase program. 2 of the users installed it first doing an upgrade - now they have decided they want to do a clean install. How can they do a clean install - I can't give them the installer cd we created because I have been informed by Apple Sales that it will use another license from our quantity of 20 - but they offered no other solution.
We would rather not waste another license just to do a clean install.
Thanks!

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
This method relies on the Internet Recovery system. This is the standard procedure when you don't have an installer or Lion came pre-installed.

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

, I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library Still syncing with i-Pod but playlists lost , podcasts no longer syncing. How to restore back to original state . I have tried re-installing - with no change

I do the same thing as you do...
My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
There are a couple basic principles to iTunes that I believe you should know.
1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

"Premiere Pro stores the preview files in a folder you can specify" But how?

Specifying a Preview folder
On page 265 of the PDF it states:
Premiere Pro stores the preview files in a folder you can specify.
QUES 1
But how do you specify the folder? I just rendered a test clip and was not offered the option of specifying a folder. And there is no other mention of preview folders in the PDF.
Preview Files for Encoding
On the same page is:
Note: Adobe Media Encoder does not automatically use Premiere Pro preview files for encoding. To make use of the Premiere Pro preview files, you must select the Use Previews option in Adobe Media Encoder for each encoding process.
It is not clear from the PDF what is the quality of these preview files.
QUES 2
If I select the Use Previews option when exporting, aren't I degrading the quality of the export by encoding from an already encoded preview?
QUES 3
For the absolute best quality, should Use Previews be turned off?

Preview File location is determined in the overall Project Settings.
Set this location before you render any Preview Files.
Project > Project Settings > Scratch Disks...
Some documentation regarding the Scratch Disk location is buried here:
Specify scratch disks to improve system performance
QUES 2
If I select the Use Previews option when exporting, aren't I degrading the quality of the export by encoding from an already encoded preview?
In most (if not all) cases... yes.
Previews are intended for real-time playback in the Timeline only.
You should not use previews for export.*
QUES 3
For the absolute best quality, should Use Previews be turned off?
Yes!
*There are a few semi-obscure exceptions to this general rule.

Using External_Stage can we specify a location other than staging dir

While using external stage mode for weblogic(I am trying for weblogic92)we must manually copy the deployment files(web app) to the staging directory of each target server before deployment.
Is there a option to copy the deployment files to another location other than Server's staging directory? To be more specific can I specify a location which is outside the server?
Secondly, with no-stage option of weblogic we can have a external location for the web application, but in case of the cluster,
this location has to be either shared or
the secondary node should have the same location(path to the web application) as that of the primary server.
Here is my config.xml entry of the primary node.
<app-deployment>
<name>TestWebApp</name>
<target>TestCluster</target>
<module-type>war</module-type>
<source-path>C:\TestWebApp\TestWebApp.war</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Here there is only one source path for the entire Cluster. So if both of the server nodes have a valid location(C:\TestWebApp\TestWebApp.war), then the deployment will be fine on a running server. But on the second server node, if the Web app does not exists on that location, deployment will fail.
When we share the location the concept of cluster is lost. If go with the second option then the user is restricted to have the same path on second node also.
Is there any way to specify differnt locations(of the same web app) for different servers in the Cluster?

A few points of clarity:
1) Session starts in consumer group LOGIN_GROUP. That does not have session queueing since queueing sessions at log on time results in the user experience of a hung session, which we cannot have. Whether service X is used to get it there or something besides services is fine; how is not a concern at this point.
2) Session moves to consumer group MAIN_GROUP after about 5 CPU seconds in the LOGIN_GROUP. We want to do this because the MAIN_GROUP has session queuing, which we want for most sessions after they have the unqueued login experience per point #1.
3) Session moves to consumer group SLOW_GROUP after about 60 CPU seconds in the MAIN_GROUP (or some number of seconds; exact numbers are not the main focus here). We want this because we want long-running queries to be downgraded. However, we don't want to leave the session there since the query is the thing that is running long, so we want the session to get back to MAIN_GROUP when it is done. However, if we use SWITCH_FOR_CALL when going to the SLOW_GROUP, it will switch back to the LOGIN_GROUP. Which is the trouble--LOGIN_GROUP is an unqueued group, so we don't get the desired session queueing.
4) The solution must be fully automated without any DBA intervation or application code. We cannot use appliation code as this solution is intended for BI users working in tools that have direct data access. Thus prevents the use of DBMS_SESSION as you stated in your posts. How would we do that switching in an automated fashion without application code?
5) We cannot put the DBMS_SESSION commands in a login trigger since that would switch groups to MAIN_GROUP and would again run the risk of queueing a session at login, which feels like a hung session to users and results in a bad user experience and help desk calls.
Thanks!

How I Can Specify JDeveloper Location to Install BI Beans?

Similar Messages

Maybe you are looking for