How I can upgrade mac os 10.5 to 10.8

Dear Madam or Sirs,
How I can upgrade Mac OS 10.5 to 10.8?
I want to save all my programs and documents.
Do you have detail instructions?
With best, Regards Alex

Customers can still purchase Snow Leopard from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
Once you have upgraded to Snow Leopard you will need to download and install the Mac OS X 10.6.8 Update Combo v1.1. You can then access the App Store where you can purchase and download Mountain Lion.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.

Similar Messages

  • I have a Mac G4 1.5 Gb RAm 733 MHz how I can upgrade to be faster

    I just get the Mac Power PC G4  with 1.5 Gb RAM and 733MHz with Graphics Chip set Model ATY- 16 MB VRAM(total),Rage 128 Pro. Mac os Tiger 10.4.11 It is my first Mac so I would like to know how I can upgrade the System to a fastest because it doesn't update the flash player, the Safari close suddenly and even I can't update itunes it is very worse. I know will be better to buy a new one but unfortunately I can't. I need any help Thank you.

    *Flash Player for PPC Macs*
    Adobe's last release of Flash Player for PPC Macs was in November, 2010 with release 10.1.102.64 Subsequent releases are for Intel based Macs only.
    To check your installed version of FlashPlayer - http://www.adobe.com/software/flash/about
    To update you should download:
    Flash uninstaller: [http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,] Make sure you get the right one.
    Flash installer 10.1.102.64 [http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp_10.1.102. 64_and_9.0.289.0_archive.zip]  Open the archive to reveal yet more archives and multiple files. Select: flashplayer10_1r102_64_ub_mac.dmg
    To install:
    1) Run Disk Utility and verify your hard drive.  If the hard drive reports errors then it will need repairing first (another topic).  If it verifies, run Disk Utility's repair permissions.
    2) Back up your hard drive, ideally to a bootable clone. A bootable clone will allow you to restore your hard drive to its original state should something go wrong.
    3) Quit all applications to ensure nothing is actively using Flash. You can even do the next step while booted to Safe Mode to make sure.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://support.apple.com/kb/HT1564]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    4) Run the uninstaller application. Adobe says, "Adobe recommends that you restart your computer before you install a different version of the player."
    5) Run the installer application from the .dmg file you got from the second download.
    6) Use Disk Utility to repair permissions on your computer. This is important when installing anything from Adobe.
    7) Restart your computer.
    Notes:
    Adobe installs things all over your computer. Simply dragging a file or two to the trash won't ensure you have uninstalled all old file components.
    Comments about Flash and Shockwave. [http://discussions.apple.com/thread.jspa?threadID=2769507]
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862

  • HT1338 How do I upgrade Mac OS X Tiger?

    How do I upgrade Mac OS X Tiger?

    Note the 867 Mhz or higher (1 Ghz is higher) is necessary for 10.5.
    Note 10.5 also gets rid of Classic, the compatibility for Mac OS 9.
    Note 10.6 to 10.6.8 can be upgraded to 10.7 or 10.8 as long as you have a Core2Duo minimum.   10.7 or later are not compatible with Rosetta, the Mac OS X tool that lets pre-2006 software run on newer machines.  For more on each, see these tips on 10.4, 10.5, 10.6, 10.7, and 10.8.
    If you meet the requirements after purchasing the 10.6 installer CD.
    10.4.4 through 10.5.8 can be upgraded directly to 10.6.3 to 10.6.6 to 10.7 to 10.7.5
    10.4.4 through 10.5.8 can be upgraded directly to 10.6.3 to 10.6.8 to 10.8 to 10.8.4
    10.7 & 10.8 are separate purchases, and can be downloaded from the Mac App Store once you are at 10.6.6 or 10.6.8 minimum depending on where you are at.

  • How I can upgrade from Version 10.7.4 into the last version ?

    How I can upgrade from Version 10.7.4 into the last version ?

    If your computer meets the requirements then open App Store, sign in with your Apple ID. Locate Mountain Lion, purchase and download.
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

  • I have a macbook 3,1 10.6.8 and i dont know how i can upgrade it to 10.7.4

    I have a macbook 3,1 10.6.8 and i dont know how i can upgrade it to 10.7.4
    2 GHz Intel core 2 duo
    4GB 667MHZ DDR2 SDRAM

    Phone the online Apple Store and order a download code for it.
    (81491)

  • How I can purchase Mac office by mail or net and how I can purchase Window 8 and Microsoft Office by Internet also. Thank you.

    How I can purchase Mac Office or Window 8 and Microsoft Office by internet online.

    Welcome to the Apple Support Communities
    To buy Windows 8 and Office, you have multiple sites as Amazon, but you can get them as a download from the Microsoft Store without any problem. See > http://www.microsoftstore.com

  • HT6114 How I can upgrade 10.5.8 to snow leopard. thanks

    How I can upgrade 10.5.8 to snow leopard. thanks

    Buy a copy of the Snow Leopard Disc from Apple (or eBay or such). That's the only way. It does not come as a download.
    Pete

  • HT4623 How I can upgrade my iPad (iOS 3.2.2) to iOS 4.0.0 or later ?

    How I can upgrade my iPad (iOS 3.2.2) to iOS 4.0.0 or later ?
    I'm from Indonesia. I have my iPad (the first version) from 2 years ago. Now I have a trouble to download some apps in App Store just because of the requirements doesn't support for my iPad. Nowadays most of apps are need iOS 4.0.0 or iOS 5.0.0. Please help me to upgrade my iPad (iOS 3.2.2) to iOS 4.0.0 or later ??? I have no idea. Thank you.

    You can only update to the current version (i.e. 5.1.1) as that is the only version that is 'signed' by Apple.
    You will need the latest version of iTunes on your computer - you can check if you are up-to-date via, on a PC, 'Help > Check For Updates'.
    When you have that installed, connect the iPad to your computer and on your computer's iTunes copy any purchases off the iPad via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
    You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

  • I have IPAD model no. MC497FD ...how i can upgrade its ios from 5.1.1 to 6.1

    i have IPAD model no. MC497FD ...how i can upgrade its ios from 5.1.1 to 6.1

    MC497FD
    It's a first generation model and incapable of being updated past 5.1.1.
    (95060)

  • I have  iphone 5 how i can upgrade to ios7??/

    I have  iphone 5 how i can upgrade to ios7 ,please guide me?

    1. Settings > General > Software Update
    2. Connect phone to iTunes on your computer via cable. Click "Upgrade" on Summary page/

  • How I can upgrade from Office2010SP1 to Office2010SP2 without MSO Cache?

    hello,
    I am planning to upgrade Office2010 SP2, however, clients do not have MSO Cache of Office2010.
    Enviroment; Windows7 SP1, Office 2010 SP1/ clients - 1000over
    I tried below;
    * download full package of SP2 and installed  using shutdown script - failed
    * copy and placed MSO Cache files - failed
    * WSUS deplyment - failed
    We have over 1000 clients, so it is not possible to re-install Office2010.
    Please tell me how we can upgrade it.

    For how to deploy software updates using the Updates folder, you can refer to this blog post:
    http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
    Have you fully updated before installing SP2? What's the version number of your existing Office installation?
    We do have some cases that even we get the MSOCache files back using installation media, it may sometimes not work with Office 2010 SP2:
    http://www.sevenforums.com/microsoft-office/298855-service-pack-2-kb2687455-will-not-install.html
    (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • HT201269 How I can upgrade an iPhone 3 from my computer?

    I would like to know how I can upgrade my iPhone3 from my computer? When I go to Settings, it doesn't appears "Software update", so I can do?  Since I have it I can't download some applications I will like to have in my cellphone.  Can you help me with this?

    Again:
    " it can not be upgraded beyond 4.2.1."
    Read the entire article, not just the first half to learn how to update to ios 4.2.1 via itunes:
    iOS: How to update your iPhone, iPad, or iPod touch

  • HT4009 What about upgrading? I can't do that from where I live w/o connecting to my hd. Now with the new changes to ITunes, I don't see how I can upgrade thru the traditional route I took b4. Now what do I do?

    What about upgrading apps on your IPhone? I can't do that from where I live w/o connecting directly to my laptop. With Apple's new Itunes page, I don't see how I can navigate successfully now to acheive the same result as before. Hmmm. I would appreciate some quick guidance. Thanks.

    With iTunes 11 you can enable the left-hand sidebar that used to show on previous versions of iTunes via option-command-S on a Mac, control-S on a PC. You can then select the Apps part of your iTunes library on that sidebar and on the right-hand side of iTunes click the Check For Updates button at the bottom to see if any of your apps have updates available. Then connect your phone and select it on the sidebar, and on the Apps tab on the right-hand side click the Sync button at the bottom of it to copy the updates over

  • HT3607 How do I upgrade Mac OS X Server to OS X Lion

    How do I upgrade to 10.6 or higher as the software I want to use needs 10.6 or higher.
    I currently have Mac OS X Server 10.5.8.

    You should be able to find it under "Featured".
    Here's a good guide for you but I'd wait for Mountain Lion, coming soon.

Maybe you are looking for

  • Performance issues in Proxy-XI-Jdbc scenario

    Hello, I have developed a proxy to JDBC synchronous scenario. My scenario works like this. *i run an abap program which calls a client proxy, the proxy fetches the data from database table and returns the data in the ABAP program.(select query) there

  • Issue with - Connector Framework  SAP EP 7.0

    HI Need assitance on usage of connector framework to connect to SAP R/3 using SSO. I am trying to call a BAPI from a jsp iView using sap connector framework. Release :  EP (SAP NetWeaver 7.0 (2004s) SPS 12). Steps I did so far : 1. imported following

  • Missing Timecard Report output in Excel

    Hi all, Can you help me in extracting the missing timecard report output in excel format. Is it possible to achieve thru' configuration like setting up some profile option? I have tried using vieweroptions: Application for text to 11i Excel but it is

  • Need help/advice/info on displaying progress msg in multithreaded MIDP

    So I have this kind of MIDlet: 1. Using multi-threading feature to access remote web service/JAX-WS. The threads retrieve strings from GlassFish, connected to a MS SQL Server 2008 database. 2. The retrieved strings are to be stored within the MIDlet'

  • Passing RFC output structure to another RFC input structure.

    Hello Friends, I have 2 views (i.e. SearchView & ResultView). In search view, I pass input parameter (PO Number) to BAPI_PO_GETITEMS and get back the output table PO_ITEMS correctly. I display this table in the ResultView correctly. Now, after displa