How i can use "wake on lan" with time capsule

1. Preference -> Energy Saver -> Options -> WOL check
2. in airport utility
internet>nat>defalt host check
3.and I'd send magic packet.
but it doesn't work
How i can wake on my mac through time capsule.

Can you be more specific ?
Where do you send the WOL from? Another computer? From the same network? How are each machines connected ?

Similar Messages

  • How  we can use forms HTML capabilities with Oracle Applications?

    Hi
    Could not find any specific doc how we can use forms HTML capabilities with Oracle Applications?
    Thanks

    I'm not sure that I understand exactly what you are asking?
    What are you trying to do? If you could give a detailed explanation then we can try and assist.
    Reagrds,
    Bren

  • What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    You need to give us a lot more info.
    I presume the MBA and the TC are the combo that doesn't work, although you don't clearly state that.
    If the ipad and TC work.. are you sure the ipad is connected via the TC and not 3G network?
    If it is then the TC itself is fine and the issue might be setup on the MBA.. although if the MBA works with other routers.. that rather confuses the matter.
    You need to actually tell us how the TC is setup in the network. What kind of broadband modem you have and what kind of vpn you are using.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How can I Bkp my Iphone with Time Capsule?

    How can I Bkp my Iphone with Time Capsule?

    No, you will have to re-create the playlists manually on the computer.  Did you somehow delete your iTunes Library and the content that exists within that library?  If you attempt to sync the phone with an iTunes Library that does not have all the content that the phone has, then the content on the phone will be replaced with the content from the computer.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • How can I disable SSID broadcast with Time Capsule?

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    Thanks.

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    You can by turning on hidden network.
    Open the airport utility .. click on your TC, and then edit.. go to the wireless TAB. Click on wireless options. Click Create hidden network.
    Let me add in modern world.. it is totally useless. A person can see your hidden network using any standard wireless analysis software. It adds no security at all.. and WPA2 Personal with a decent password 10-20 characters mix of upper and lower case plus numbers is still solid.. add more characters if you are paranoid.. but honestly hiding SSID does nothing.
    http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssi d-really-more-secure/
    If you did not know it is not part of the IEEE wireless standard.. it therefore often leads to problems with clients.
    There are many other reasons given in the article above..

  • Anyone Use Different Backup Software with Time Capsule

    I love the concept of Time Machine + Time Capsule, but there are too many problems and I have wasted too many hours trying to get it to work properly. So...
    Has anyone had success using different backup software (maybe Apple Backup) with Time Capsule?
    I would love to go back in time and simply:
    1-Plug my computer into the drive (wireless is fine too)
    2-Launch my backup software
    3-Backup

    Really not sure. I've always just done bootable backups...
    You CAN create a bootable backup onto a sparse disk image on an Airdisk, but of course it wouldn't really be bootable until the backup was cloned back directly to a drive. So I guess you could back up that way, and if you needed it you could restore back to your main HDD, from the sparse image, and the computer would be restored and bootable. I think.
    My original goal was to have both Time Machine backups and SuperDuper clones ll being done over the Time capsule/Airdisks, but now (if I decide to get an AEBS or TC) I will likely only do the Time Machine backups over the wifi, and still have an occasional clone made to a drive plugged in via usb.
    To your last comment though...if your only going to do the User folder, it may make as much sense to just use Time Machine, since you can restore/migrate from a TM backup. Although it may be smart to do a user folder backup using BOTH Time Machine and SuperDuper, for redundancy.
    Sigh, always so many options, and usually doesn't work the way you want it to...

  • Use Network ready printer with Time Capsule?

    Recently bought a laser all in one Canon printer that was network ready. Canon tech support told me it would not be compatible with Time Capsule (500 GB) as the wireless source. Is this true?
    If true, what printer brands will network easily with the Time Capsule?
    Thank you!
    In search of new printer

    Welcome to the discussions!
    If the all-in-one is "network ready", it will have an ethernet port to connect to the network. It will need to connect by ethernet if you want to be able to use the scan, fax, copy, etc functions.
    If you are planning to connect the all-in-one to the Time Capsule USB port, the printing function will work if the device is compatible. The other functions will not be supported.

  • Can I use Wake-On-LAN with P1606dn Printer?

    I have a P1606dn laser printer which is remotely located and the power is remotely switched. 
    When it is first powered up, the button on the front has to be pressed to cajole the printer into life .  It lights up green and we are good to go.  After this, even if it has dropped into power saving mode, sending a print commnad wakes it up and network printing works fine.
    However, I want to do away with the walk to press the button when it is first powered up.  I've tried using a Wake-On-LAN command to the IP and MAC addess of the printer, but nothing happens. 
    I realise I could leave it permananetly powered but don't want to do this because there are other devices on the same supply that need to be turned off at night.
    How can I get it to wake up remotely?
    many thanks.
    This question was solved.
    View Solution.

    Whenever power is first applied to the P1606dn, that has been in a no-power state, the unit is turned Off. The unit's power light may be on, but the unit itself is off. Whenever you press the button, then the unit goes through the power up and obtains the IP address to function.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • How can I play MP3 files with time capsule on a stereo set?

    Hello,
    Can anyone offer ideas/suggestions how to play my mp3 files (itunes) from a Time Capsule device? I use a plain Philip 5.1dts set. I would like to be able to select music with either my iphone, ipad ir macbook.
    thanks, Anton

    You will need to add an Apple - AirPort Express to be able to stream your iTunes data to your amp/speaker setup.

  • How can i connect plex app with time capsule

    i have a time capsule 2TB and iphone 5s and ipad mini 2
    i stored all my movies on the TC and i can acces them by imac and apple tv
    i just bought plex for ipad and iphone and don't now how to connect to TC
    i want play these movies by ipad by plex connected to TC but don't know how to
    please help

    i just don't know to acces the TC with the plex app i tried several thing like port forwarding but can't figure it out
    The plex app is a client.. you must be running a plex server in your network..
    https://plex.tv/ios
    Since the Apple Time Capsule cannot host any media.. since it has no media extensions it is impossible to support plex server on it. You must run a plex server on a computer or intelligent device.. TC doesn't rate as it is a fixed router with nothing to help you.

  • How come I can't see my ipad with time capsule?

    When on my macbook pro and having the time capsule, i don't have visibility to my ipad on my mac? Why?!?!

    What visibility are you wanting??
    If the ipad has internet via the TC, then it should be able to backup to itunes in the computer.. otherwise the computer will not really see the ipad at all.. it is not a network share.
    The file structure of the ipad is deliberately hidden.. and therefore it does not see files on a TC or computer.
    You can load a filebrowser app into the ipad.. but that will still not enable the computer to see the ipad.. it is still not a network resource.. AFAIK.. I don't have ipad.. so check what you are trying to do with the more like this on the right.. or in the ipad section.

  • Using my Apple Tv with Time Capsule

    I would know if it is possible to store movies and photos on Time Capsule, not in a folder in the back up folder, and displays them to the Apple TV, use it as an external HD. How can I do this?

    You would need to treat the Time Capsule as a network drive location storing iTunes media - the compuer running iTunes would need to be on with iTunes running.
    No way currently to get AppleTv to see TC without iTunes acting as intermediary.
    AC

  • How do I use my airport express or time capsule to increase the signal strength of my comcast router

    How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

    Neophite50 wrote:
    Thanks.
    A question. Do I plug the TC into the Comcast modeum Router or the iMac?
    Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

Maybe you are looking for

  • CAN NOT UPDATE A N95 14.0.001

    Hy , i have a T-Mobile N95 V14.0.001 and you have for this model lunched out V21.0.016 . Why does nokia firmware update says that i have the latest firmware installed ? i really want someone to solv this issue !  i'v been waiting  a firmware update f

  • How to handle the CRM Middleware after system refresh?

    Guys, We are using CRM 5.0 & R/3 4.6C. We have the middleware configured and set up. We finished all inital loads & delta loads are activated as well. The system works perfectly. Now for some reason the client wants to refresh the R/3 system. (Basica

  • Captivate can manipulate an external file?

    Captivate 4 Output: .exe, but we can convert to .swf, if this was necessary. Like a .txt, or something else? We have a course finished and ready to start, except for the organization of the student info (name, lesson viewed, quizz result); We create

  • Problem in inst. ST-PI & Upgd. of PI_BASIS

    Hi All, We are in the process of upgrading SAP 4.7 to ECC 6.0 We have upgraded our Oracle from 9i to 10 g and run the upgrade prepare. Now upgrade prepare statistics says that we need to upgrade  ST-PI & PI_Basis. Currently we have (SAP R/3 4.7*200):

  • [svn:bz-trunk] 16967: Bug: BLZ-549 - cyclic dependencies between core and remoting projects

    Revision: 16967 Revision: 16967 Author:   [email protected] Date:     2010-07-19 00:41:00 -0700 (Mon, 19 Jul 2010) Log Message: Bug: BLZ-549 - cyclic dependencies between core and remoting projects QA: Yes Doc: No Checkintess: Pass Details: -Removed