How i configure external directory and email

hi every one
i have just installed and login to oracle beekeeper successfully. now i want to intergate the external directory to my active directory so that all users in it will be mapped in oracle beehive secondly i can use them for email purpose.
i am really new to oracle beehive , i have read the administration manuals. but still confusing how to start , the parameters in external directory creation for active directory cannot understandable for me, what does authectic attributes means.
kindly guide me in this regard and secondly if any image base document avaible so that i configure it through that.
regards
Oraclebeehive new user

Hello,
The primary Authentication Attribute, is just the LDAP attribute you will use to be able to log on Beehive
That can be an UID, the email address, the cn or with AD the sAMAccount
eg: uid: 123455667
mail: [email protected]
cn: firstname.lastname
these attributes and their associated values are on AD and must be available for ALL employees as well as UNIQUE.
Often the email address, the UID or the sAMAccount have unique value.
Hope that help
However, You may want to take some days of expertise to help you on this setting. That will simplify and speed up your learning curve and Beehive implementation.
Regards,
Fred

Similar Messages

How to Configure E-mail and Chat functionalities

Dear all,
How to configure E-mail and Chat functionalities for IC Webclient.
through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
Where these E-mails can be stored?, Where we define agent E-mail id?
being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
How does CHAT functionality works?
Please educate in above scenarios to get a better understanding.
Your help will be highly appreciated.
Best wishes
Raghu ram

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to configure sales forcast and assign marketing budget

how to configure sales forcast and assign marketing budget

Hi,
As per my knowledge i am telling forecasting is done by Historical Data { MM & PP Module }
when you collect the data based that we have to plan every month how much you want to procure the raw material etc..,
that should be entered in the material master under "Forecasting" tab there we have to maintain monthly wise forecasting values
i think it should get some idea if i wrong please clarify
Regards,
Prasanna

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to manage Active directory and tools to manage Active Directory

How to manage Active directory and which tools we use?

You can use Microsoft Active Directory management tools:
http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
erview of Server Message Block signing
http://support.microsoft.com/kb/887429/en-us
Remote Server Administration Tools for Windows 7:
http://www.microsoft.com/downloads/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d&displaylang=en
AD Admin Center:
http://technet.microsoft.com/en-us/library/dd560651(WS.10).aspx
http://technet.microsoft.com/en-us/library/dd560652(WS.10).aspx
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX http://blogs.sivarajan.com/ http://publications.sivarajan.com/ This posting is provided "AS IS" with no warranties, and confers no rights.

I need to know how to configure wi-fi and VPN on m...

I need to know how to configure wi-fi and VPN on my E61i.
everytime I search for any available WLAN,I find one(in my company)and when start browsing,it gives me(WLAN not found).
What should I do?

iOS: Connecting to the Internet

How to disable external VGA and also enable onboard VGA

hello,
my spec is
cpu corei5 ivybridge
mis zh77A GA43
vga hd7770 msi
i want to know, how to disable external VGA and also enable onboard VGA ??
and
i want to ask too, if i disable external VGA In MB, it is my external VGA still consumption power? or i must unplug my external VGA ?
how much different power consumption between external VGA and onboard VGA on idle time?
because my computer each night be used for download, i want to save power as i can...
also there is a eco mode? i want to know about eco mode, how much power can be save under eco mode? on idle time computer
sorry my bad english

Well remove the HD7770 and is disabled and doesn't consume any power. You can't enable or disable it the discrete vga when pc is in use. That board does also not support Virtu.
The possible power saving beacuse of eco mode depends on the individual systems. There is no general value. Just try it.

Where/how to troubleshoot external gateway and internal connection brokers etc.??????

We have gateway.domain.org as our external/internal gateway server.
It goes from gateway.domain.org to rdbroker.domain.local, rdbroker is the DNS address for two connection broker servers.
After this it should set up the connection and create a remote desktop to one of the RDS host servers in the RDS host farm.
Sometimes this works, sometimes it doesn't -- for different user accounts and different computers.
How to troubleshoot this??
We know the firewall rules for DMZ etc. etc. are properly configured because everything IS observed to work, just not all the time consistently. We get errors about cannot contact the computer, cannot establish remote desktop connection...
Thank you, Tom

Hi Tom,
Firstly, you need to recheck the DNS entry is well setup for your case. Are you using DNS RR for Load balancing the server or 3rd party load balancer? Have you setup the proper certificate for your case?
Please check whether required ports is opened? We need to open TCP port 443 and UDP port 3391 and forward them to your RD Gateway server. Also need to specify the external FQDN of your RD Gateway server in deployment properties under RDS server manager. If
you have RDWeb and RDG on the same server this would be the same FQDN that your users will use for RDWeb. Please see whether you have properly configured RD RAP and RD CAP policy.
You can go through beneath article for more details.
Step by Step Windows 2012 R2 Remote Desktop Services – Part 3
https://msfreaks.wordpress.com/2013/12/26/windows-2012-r2-remote-desktop-services-part-3/
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to config. to schedule and email reports

Hi,
Please help me on these questions:
1. How to configure the reports server (or 9iAS or something
else) to schedule reports, I also need to email the reports to
customers in pdf and excel format, what should I do to achieve
this?
2. I have to re_start report server from 6iserver directory
using reports60_server start (on Soloris 5.8, I use SSH to
access it and I build a tunnel for the prot 7777 to my local
computer) every time I run a report, How can I fix this problem?
3. my reports require passing parameters in, but I didn't see
anywhere I can do this if I run them from URL, any idea how to
fix ?
Thanks very much

I can only answer #3, I am looking for the answer to the 2nd
part of #1. You can pass all Report specific paramters to the
reports server with the URL. ex/
http://server_name/app_server/server.exe?param1=...&param2=...
etc. the param1 and param2 names and values will be passed along
to the report itself.
Jeff

How to configure Output Directory at Jobs

Allo.
I am quite new in IR eventhough I played with FR for months already.
I need to set a BQY job to run every morning and inside the job has multicycle things. One of it is to export the processed BQY into my drive D:\\InterativeReporting\. Now, I manage to go through until the job parameter -> modify cycle -> process option and the last page shows me to use Output Directory.
From the docs I know that this Output Directory need to be configure manually but it's not written in any docs!
So, I had done;
1. checked the documentation of HBI (hs_user.pdf, hs_admin.pdf)
2. checked IR users docs
3. Checked FR & Prod Reporting docs
4. hoping it will work like FR with it's external directory where we need to change a bit at the scheduler.properties and go through all .properties under BIPlus/Lib/
5. sacrifice my fried chicken lunch to nearby kitten
Does anybody knows how to configure the output directory? Please let me know. I can't afford to keep sacrificing my lunch..
Thanks!
Daniel.

Hi Guys,
Yeah, I found it at the Developer Guide and follow the direction there. Spent entire morning to try it and it works!
However, it should have been faster using the Physical Resources feature available at Workspace! But I got good lessons there with java -after numerous hair pulling experience and all zoo words shouting. LOL.
I got to bounce to Singapore last week and I left my laptop at my apartment, sorry for late reply and thanks guys!
Daniel.

How to configure Open Directory base DN

Hi,
I have been using OpenLDAP on a Synology NAS drive, but this has some serious shortcomings with Mac clients (eg. roaming profiles simply doesn't work).
So I have bought a MacMini which among other things will replace my existing LDAP server with Open Directory.
As a dry run, I enabled the Open Directory and went through the simple set up and I had a basic system up in no time. However I have come up against an annoying issue with the base DN used by Open Directory and I hope someone will be able to help me.
My existing LDAP has a base DN that looks like this: dc=myorg, dc=local
So when users log in, they can use a username which conforms to the following format: [email protected]
The problem is that Open Directory likes to set the base DN to: dc=macservername, dc=myorg, dc=local
meaning that a fully qualified user account name now becomes: [email protected]
This seems bonkers to me. For example, what would happen if I introduce a second Mac server into the mix and failover to it - the servername element of the DN becomes redundant or if it changes, I need to communicate with all users.
I must be missing something obvious - but there doesn't seem to be much in the way of configuration that I can see through the Server application.
So, my question is, how can I configure my base dn without the servername so that my existing username context remains the same?
Many thanks - I look forward to any responses.

I agree with Dal78 Apple using a base DN of servername.example.com rather than just example.com is illogical. In fact originally they did seem to use just example.com as the format but in recent years now use server.example.com as the format. When I first encountered this change it was still possible to overridge the use of servername.example.com and force it to use just example.com as the format. In more recent times I have decided to leave things the way Apple do it.
I don't know if there is an official answer as to why, but a possible guess is that you can now have multiple Open Directory servers for a single domain. This is the 'Locales' option in Server.app. It maybe that including the servername makes it possible/easier to implement this.
I also agree Strontium90 do not use a .local root domain for Open Directory. In theory there are hacks to (sort of) get this to work, but Apple engineers will typically run screaming for the woods when they encounter this.
PS. Briefly Apple also did the same illogical thing with DNS zones, whereby the zone name for a domain was servername.example.com instead of example.com this at least they have stopped doing.

How to Configuring external certificate for MEP

Hi,
I want to configuring external certificate to my mep gateway tier , can any one tell me procedure how to configure the certificate.
I am configuring behind the firewall I cannot run default port no 8181 for https , so where can I change https port no for MEP after installation and I need to import external certificates in to keystore.

Hi Jayanth,
Both issues you raise are GlassFish issues rather than MEP issues per se.
To change the port, after doing 'asadmin stop-domain mep' you just edit the
domain.xml file in the .../domains/mep/config directory manually. Search for
8181 and change it to whatever you want, then restart GlassFish (asadmin start-domain mep).
In the MEP Installation Guide, there is a section on establishing trust between
tier1 and tier2 in a two-tier configuration. See http://docs.sun.com/app/docs/doc/820-7203/ggxmb?a=view
Hopefully, you can generalize that procedure to your situation.

How to Configure logical path and how to retrieve physical path for an IDOC

Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit Rungta

Using Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
      FORMAT(3),
      FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
     EXPORTING
          LOGICAL_FILENAME        = 'MYTEMP'
          OPERATING_SYSTEM        = SY-OPSYS
          PARAMETER_1             = '01'
     IMPORTING
          EMERGENCY_FLAG          = FLAG
          FILE_FORMAT             = FORMAT
          FILE_NAME               = FNAME
     EXCEPTIONS
          FILE_NOT_FOUND          = 1
          OTHERS                  = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag      :', FLAG,
         / 'Format    :', FORMAT,
         / 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System.

How to include external javascript and css resources to a jsf?

I need to include external css and javascript files to my jsf page. Using the code below does not work because all the styles on the css page are ignored and the functions within the js files are not executed.
<link rel="stylesheet" type="text/css" href="/resources/styles/style.css" />
<script language="JavaScript" src="/resources/javascript/util.js"></script>When I try to execute any js function within a script tag on a jsf page I get an object expected error.
I googled about my problem and found this piece of code for importing styles for an external css.
<style type="text/css">
@import url("/resources/styles/style.css");
</style>How could I add an external javascript file to my jsf?

Used the relative urls in my first post as well as these, and both were not working.
<link rel="stylesheet" type="text/css" href="./resources/styles/style.css" />
<script language="JavaScript" src="./resources/javascript/util.js"></script>The ./ tells that the external file can be found by starting at the current directory and working down the path to the specified file. This is my directory structure. Index.jsf is the file that references the external js and css files.
-Webcontent
|_index.jsf
|_resources
|__styles
| |__style.css
|__javascript
|__util.js
Either way I still can't reference the files that I need. Calling a javascript function results in an object expected error, and the styles are ignored.
If I include the js file directly in the jsf then I can get it to work. I don't want to do this because I have created a handful of seperate js files, and do not want to include all of them in one page. I am using myfaces and tomahawk if that helps.

How does Configurator's directory structure work? Can database/devices be recognized once they're "lost"?

Yes this is as bad as it sounds. Configurator started freezing and crashing today. It asked to be reinstalled after "Core Data" errors. I went to a back-up and started overwriting the existing directories, but nothing seems to work. I've copied about 200 resource files into every resource directory I can find, but each time I open Configurator, it doesn't see the 230+ devices it has configured.
Does anyone have any advice on how to do this? Is there some file that can be deleted and rebuilt? There's so much I fail to understand about this software.
And make sure everyone backs things up more often than I do.
Thanks!

Yes this is as bad as it sounds. Configurator started freezing and crashing today. It asked to be reinstalled after "Core Data" errors. I went to a back-up and started overwriting the existing directories, but nothing seems to work. I've copied about 200 resource files into every resource directory I can find, but each time I open Configurator, it doesn't see the 230+ devices it has configured.
Does anyone have any advice on how to do this? Is there some file that can be deleted and rebuilt? There's so much I fail to understand about this software.
And make sure everyone backs things up more often than I do.
Thanks!

How i configure external directory and email

Similar Messages

Maybe you are looking for