How i discover all work-group computer in sccm 2012

how i can make discovery for all work-group computer in sccm 2012

Jason - true but some environments don't always have this luxury. I've worked with clients recently whereby they weren't able to add all devices into AD but yet still wanted to managed them in ConfigMgr. It does add complexity and extra work and I wouldn't
recommend, as I'm sure you wouldn't, running Network Discovery on a frequent basis.
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

How to manage Work group Computer through SCCM 2012 R2

Hello..Experts,
We have to manage the Workgroup Computers both Linux and windows Environment through SCCM 2012 R2.
what are limitation associated with managing Workgroup computer both with Linux and windows Computers through SCCM.
Please help us how to achieve this.

Windows devices that are Workgroup members have the same features for management as domain joined devices except that it is slightly more difficult to get the client installed on these 'unmanaged' devices.
The Linux computers have only basic support for Inventory, Application Management, and Compliance.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Can i now all work-group computer in my company using 2012

can i now all work-group computer in my company
the work-group computer not installed client sccm 2012

no, i want count workgroup computers in my company
You can get the number of machines managed by ConfigMgr that are in workgroups. However that might not be all clients in different workgroups since there is no guarantee that all machines are managed by ConfigMgr (have a client).
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

I now have 6 iphones, apple tv, ipad. how do they all work on the match

I now have 6 iphones, apple tv, ipad. how do they all work on the match

Go to your computer, activea iTunes match -- it will upload from your computer the songs it does not have in its library. Once done, turn iTunes match on on each device. Depending on your library size, it may take a few minutes before each device can access the songs. WHen you stream from iCloud to your device, a small amount of space (cache) is used. To recover that space, turn iTunes match off, wait a minute, then back on and it comes back. This is really important on the iPHone if you don't have a lot of free space.

Reports no longer work after upgrading to SCCM 2012 R2

I upgraded my SCCM 2012 SP1 environment to R2 and reports no longer work. I've removed the site role, waited a day, and added it. I've also verified the account (used by the reporting site role) has access to the DB and can logon locally. The
problem still persists. Here's a copy/paste of the error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXscrubbed' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I've tried many other TechNet solutions as well with no improvement:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
Any other thoughts on this?

So to be clear you have Done both the Mofcomp and Added the correct account to the Windows Authorization Access Group?
What is version of SQL are you using?
Is SSRS remote or local to CM12?
What service account are you using for SSRS?
Bases on the error message you are getting this within the console, Does the native SSRS report work? BTW I never recommend accessing the report via the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to deploy MS Visio & MS Project via SCCM 2012

Dear friend,
Please let me know the How to deploy MS Visio & MS Project via SCCM 2012, step by step
Thanks

You need to utilize Office Customize Tooltik to build config.xml, then distribute the config.xml with setup file. Below are some documents talking about this.
http://blogs.msdn.com/b/visio/archive/2011/02/04/more-on-visio-2010-volume-deployment.aspx
http://blogs.technet.com/b/odsupport/archive/2010/12/03/volume-license-editions-of-visio-2010-install-premium-edition-by-default.aspx
Juke Chou
TechNet Community Support

How to discover all available font styles for a given family?

I'm using InDesign CS3 and need to discover all of the available styles for any given font. I've found Application.Fonts.itemByName(), but this only returns a single font by the full name. Using ExtentScript in CS3 How can I ask for ALL font styles for any given font family (as displayed in the styles drop-down?)
Thanks!

hey,
I was just searching the web trying to find why this piece of code:
for (var i = 0; i <app.fonts.length;i++) {
app.fonts[i]..... some other code
take 4+ minutes to execute.
app.fonts.everyItem().getElements(); did the trick, sweet!!
However, I would like to ask you whether you know if there is some handout or some guide (possibly online page) for such advanced scripting...
or how did you find this solution?
thank you very much for this post, anyway
regards
jenda

How to discover all names of class of a package

Hello!
Ineed to developer a class that discover all class name and all method name of a package and put it into a database.
Anyone have an Idea how to make this?
Thanks for help-me.
Ricardo
[email protected]

Sure. Given a source or classes directory, go to the directory indicated by the package name. Get all the files in the directory (*.java or *.class depending), using a File object. You may also need a FilenameFilter. BTW, the source file method would not catch multiple classes in one file, while the class file method would.

Reports not working after upgrade to SCCM 2012 R2 -

I am having the same issue described in this post:
http://social.technet.microsoft.com/Forums/en-US/30f185ac-c34e-44ad-87eb-7d180a0d76b8/after-2012-r2-upgrade-some-sql-queries-wont-run?forum=configmanagergeneral
When running reports after upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2 I get the following error:
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Conversion
failed when converting the nvarchar value
'S-1-5-21-1010966800-777871707-395339515-124623' to data type int.
I have removed the Reporting Services Point and reinstalled it with no effect. All reports I try get the error listed above.
Any suggestions?

The issue has been resolved. For anyone experiencing a similar issue I will post the fix that worked for us below:
I ended up opening a PSS case and in this instance the problem was the required SQL management provider was not properly registered in WMI, which ultimately meant the reporting point upgrade/install was not able to complete successfully after the upgrade.
As a result the updated reports were not properly being redeployed to the Reporting Service Point.
To diagnose this on the Reporting Service Point look in the srsrp.log for entries indicating of an
Invalid Class, as seen in the example below:
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not retrieve the reporting service name for instance 'RPSERVER' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not stop the reporting service '' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Next security configuration at [11/6/2013 5:52:12 PM] SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Root Folder exists SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Successfully checked that the SRS web service is healthy on server SERVERRP.AD.DOMAIN SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Timed Out... SMS_SRS_REPORTING_POINT 11/6/2013 5:48:13 PM 6096 (0x17D0)
The important part is the lines saying Invalid Class and then it timing out, so the RP installation was not completed.
As mentioned earlier the WMI class that was missing or corrupt was the SQL management Provider. To re-register the class we need to compile the MOF file that is available in SQL. In our instance the command to run was:
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Once that was done, monitoring the srsrp.log shows that it could properly detect the SSRS service, stop it and start coping the updated reports and such. After a few minutes the deploy completed, and all the broken reports started working
correctly.
Hope that helps someone else.

How to deploy Photoshop/Premiere Elements 13 with SCCM 2012 r2?

Hi there
I want to create a .msi package of Photoshop/Premiere Elements 13 for SCCM 2012 r2. Can me anyone give a tutorial or a tip?
thx

If you want to deploy lync by SCCM, you may utilize config.xml to do that. All the things you want to configure, you may find it can be achieved in config.xml
Run the install by using the following command line:
<path>\setup.exe /config <path>\config.xml
http://technet.microsoft.com/en-us/library/jj204651.aspx
How to deploy application by SCCM.
http://technet.microsoft.com/en-us/library/gg682082.aspx
Juke Chou
TechNet Community Support

How to management of software license compliance in SCCM 2012

Hi,
Anyone using SCCM 2012 to manage software licenses? If so then I would like to find out more about it and would appreciate if you could share your experience and current setup.
thanks
Ihunzai

I was thinking to use the metering usage data on the products that are reporting over in licenses via AI inventory and push an un-installer package to the ones who have not used products in more then x months to bring the numbers down in AI.
Before, I do anything I wanted to understand how to go about with AI and importing software licenses. I would appreciate if anyone has enabled AI and imported software license file to get some numbers.
Thanks

How can you expire deployments in bulk in SCCM 2012 SP1?

As April 8th approaches and we've all but purged XP from our environment, I want to expire all of our deployments for XP packages, however; going through 350+ deployments by hand seems rather ludicrous. PowerShell for CM doesn't seem to be very developed
or suited for this (though I admit I'm much more well versed in AD cmdlets) and while I could do this by directly running a SQL statement against the database, my understanding is that this is not supported and generally frowned upon.
Does anyone have any ideas of a good way of doing this? Eventually it would apply to purging all XP related data (deployments, packages, collections) from our SCCM environment. We're running 2012 SP1.
Thanks in advance!
WB

Hi,
Here is a right click menu method for your reference.
SCCM 2012 – Retire Application
http://thedesktopteam.com/blog/raphael/sccm-2012-retire-application/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to export all distribution group display names and group notes

We would like to create a list of distribution groups that includes the "Notes" information and email address. I have found several option, but none of them reveal the Notes. Where is the "Notes" information for groups
and how can we report on it?

You can run this command to get the name of all the DL's
Get-DistributionGroup | FL Name
I checked, and Group Information attribute doesn't have all the information.
Run Get-DistributionGroup -Identity "NameOfTheDL" |Fl
In the output of above command, check if you see anything Group Information and Notes.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

PAL/NTSC footage: How does it all work?

Hi
I'm a complete newby to iMovie, so please excuse any stupid questions and please assume I know nothing!
Here's my situation: I have imported a bunch of events into iMovie '09 from two DV camera's. One a tape camera and the other a miniDVD type camera. Both of these camera's are PAL.
I have since moved to Canada (where I bought my MBP). I didn't change any settings in iMovie when I imported the events from the camera's using Firewire.
I have edited a project in iMovie and eveything looks great. I can preview the project within iMovie and it looks great.
I then want to make a a DVD using iDVD. This is where things go wrong. After burning the DVD the playback on my (NTSC?) DVD player in Canada produces a sort of stuttering effect. Audio is fine, colour is fine but the video just seems to stutter a little. I have not had a chance to try plying the DVD's on a PAL system to see if they work there, however I have played both PAL and NTSC DVDs on my system here in Canada, so I assume that this shouldn't be a problem. It must be somewhere in the process starting at importation and ending in the burning the disc in iDVD.
I have a feeling this has something to do with my settings (PAL/NTSC/framerate) during import, my rendering settings and/or the settings in iDVD etc etc but I have no idea where to start to find the right settings and make the necessary adjustments.
I don't even know if this is the problem.
I did a search in the forums but found no posts directly related to my problems or filled with too much jargon for me to understand them.
Please help!
Thanks,
Mike
Message was edited by: Hakaman

I believe that if you've shot in PAL (i.e. that's the camcorder format) you have to import as PAL, otherwise iMovie gets confused.
You can make your DVDs NTSC in iDVD - it's under Project Info. As a test, you could make 2 DVDs of the same project - one PAL, the other NTSC, and see what differences in playback there are.
There are often quality issues in swapping formats, because the frame rates have no relation to each other (25 vs 29.94).
Otherwise, you might be able to switch frame rates in the camcorders

What happens here and how does it all work?

ok so lets say i have 3 things running:
1 model (obejct A)
2 objects (B and C) which update model A at random intervals
ok so lets say B tells A to update(params).
this update takes a long time to finish, meanwhile
C asks A getInfo() which returns the status of A.
what exactly happens?
does the WHOLE OBJECT A get "locked" while update(params)
is being run? what if A had 100 huge vectors to update
and had updated only 50 of them when C asks for As latest
info?
thanks for the help!

Without threads and in a single process then whatever occurs first in the code is what occurs first.
With threads then if the object is synchronized then it waits until the other process is done.
If not then it gets the data, whatever it is, when it access the object.

How i discover all work-group computer in sccm 2012

Similar Messages

Maybe you are looking for