How I do turn off the auto-select tool in the tools palette?

No matter what I do in LabVIEW 8, it keeps turning itself back on.  It never used to do that in LV6.1!!!

Yes, I noticed that too... Annoying, isn't it? I haven't seen how to turn that off, as a matter of fact, I haven't seen the tools palette either.. 

Similar Messages

  • How do I turn off text auto-formatting in Keynote?

    How do I turn off text auto-formatting in Keynote?

    You may uncheck some preferences in the Pages > Preferences menu item.
    You may also define your own custom default template.
    But you certainly are aware of that because it's described in the PDF User Guide delivered with every copy of iWork.
    Yvan KOENIG (from FRANCE mercredi 27 août 2008 18:06:16)

  • How can i turn off an auto renewing subscription to Netflix ?

    How can i turn off an auto renewing subscription to Netflix ?

    Interesting turn of phrase.   Are you suggesting that Netflix has none standard terms and conditions that could activate penalties if the user casually unsubscribes.
    I am not familiar with their terms - I've never had a subscription with Netflix. Personally, I will always check the terms of any business I do business with and know how to cancel before committing to a contract.
    Edit: I just took the time to browse through their terms which appear rather straight up:
    https://signup.netflix.com/TermsOfUse
    From the OP's post, I also did not assume that their subscription was through an iTunes app as a direct subscription was/is available. I do not know if the terms might differ if going through iTunes (which would make sense if Netflix would be losing money by offering their service through iTunes?).

  • How can I turn off app auto start from last status? At OS X 10.8.3

    How can I turn off app auto start from last status? At OS X 10.8.3

    system preferences >general > close windows when quitting an application

  • How do I turn off iMessage on my iMac after the security update?

    How do I turn off iMessage on my iMac after the security update?

    When I click messages it shows my messages. In preferences, i click messages and it takes me back to my messages. How do I get to settings?

  • How do you turn off voice dial and Siri - since the newest update?

    How do you turn off voice dial and Siri - since the newest update?

    This worked for me:
    1. Enable Siri
    2. Passcode -> enter password
    3. Disable voice dial
    4. Disable Siri

  • TS3988 How do I turn off iCloud and go back to the way I had it before?

    I am unhappy with iCloud for a number of reasons. I want to go back to backing up my music to an external HD, storing music on my devices, and turn off iCloud.
    How do I turn off iCloud? I have iTunes on a PC.
    THANKS

    Current Firefox versions remember the download directory based upon the URL, so if the URL changes then the default folder may be chosen if there hasn't been selected a download folder before for that server.
    *[[/questions/889958]]
    *[[/questions/882443]]
    Bug 536503 - Last downloaded-to directory should be remembered on a site-by-site basis
    Firefox 11 will have a workaround by providing a pref (browser.download.lastDir.savePerSite) to disable this feature.

  • How do I turn off ALL auto adjustments in Camera Raw?

    SUMMARY:
    I am simply trying to open my images in Camera Raw (version 8.6.0.254) via Bridge CC exactly how they were shot in camera, with no auto adjustments whatsoever.  I already have all of the auto boxes unchecked in the Camera Raw Preferences dialogue box under Default Image Settings.  I am shooting raw on a Sony A7r.
    MORE INFO:
    This discussion is not being created without prior research on how to solve it.  Hopefully there is a simple solution that I have overlooked and missed when looking for it.
    I shoot my raw images flat on purpose.  The in-camera saturation is turned down, along with a lot of the other picture profile settings in the camera. 
    I use Bridge CC to sort though my images and make selects.  In Bridge, I have "Prefer Embedded" selected for my thumbnails in order to stop the auto processing to happen to the thumbnails there. 
    The problem is, as soon as I open my raw images in Camera Raw from Bridge, the auto adjustments kick in and the saturation and exposure are automatically adjusted.  I can't figure out how to stop Camera Raw from making adjustments to my raw images.  As stated above, all of the auto check boxes are unchecked in the Camera Raw Preferences.
    When the "Command U" shortcut is pressed after an image is opened, it applies the auto settings, making it clear the Camera Raw thinks that nothing has been applied yet.  Toggling between "Camera Raw Defaults" and "Image Settings" in the side drop down menu does nothing either.
    Below are two screen shots.  One of how the thumbnail looks in Bridge, desaturated and flat.  The other is how the image opens in Camera Raw with no user adjustments what so ever.  You can see how the saturation and exposure have been adjusted:
    Bridge Preview - this is how the image was shot in camera.
    Camera Raw - Straight after opening the file with no user adjustments.  You can clearly see the dramatic auto adjustments, but all of the sliders are set to default.
    I would love to get some help with this, so I can see and work on my images as they were shot.  Im really hoping it is a stupid oversight on my part with an easy fix.  Thanks for the help.

    As was already said: the camera's interpretation of the raw data is just one interpretation, and not the same as Adobe's. Don't confuse it with "exactly how they were shot", as this doesn't apply when shooting Raw. Granted it IS the manufacturer's interpretation, but you wouldn't be shooting Raw and using Adobe Camera Raw if you thought the manufacturer was always right.
    One thing nobody has mentioned is Adobe's "baseline exposure" compensation factor. Camera Raw adjusts the default preview exposure by a factor of EV based on their measurements of the camera sensor. My present camera is boosted by 0.35EV and my last camera by 0.5EV. There is a way of determining this using EXIFTOOL, but I can't remember how to do it offhand. For the last few years, I have adjusted my own Camera Raw defaults by reversing this compensation, so it more closely matches the exposure I was expecting.
    EDIT: here's the procedure, if you're interested. Re: Baseline Exposure

  • How does one turn off link auto-update?

    When we have an ID file open in CS6 and make a Photoshop edit, the link seems to auto-update. We don't like this as we'd rather 'watch' the update so if comes in as expected, etc.. Can one turn off link auto-update? Thanks!

    Are you making the edit by selecting the graphic frame and then choosing Edit Original? This will always auto-update.
    If that's not it, you might try clicking Preferences > General > Reset All Warning Dialogs

  • How can I turn off text auto-correct in Number IOS?

    I use Numbers as a project workbook and it drives me insane I cant turn off text auto-correct. I use a bunch of abbreviations that Numbers wont allow without constantly changing to the extent that its almost useless.

    Auto correct is controlled at the system, not apps, level (with a few possible exceptions, but Numbers isn't one of them).
    Settings app > General > Keyboard

  • HT4314 how do I turn off a game after playing so the app won't run down my battery?

    How do I turn off a game after playing it so the app won't run down the battery. This has happened 2x and I have had to reset my phone.

    To completely close an app (though a lot of apps don't remain active when you switch into a different app or go to the homescreen) : from the home screen (i.e. not with the app that you want to close 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

  • HT4098 How do you turn off an auto renewing subscription that does not show up within your account?  I applied for BBC iPlayer but wish to cancel the subscription, I have followed advise above but my account does not have a subscription section within set

    I have two Apple ID's as I am currently in Italy and when I first set up  my Apple ID it acknowledged my current location.  However when I applied for BBCiplayer I had to set up a different ID with UK address.  I thought maybe I was looking at the wrong account so used the e-mail address to which the auto renew receipt had been sent and followed the "forgotten Apple ID" link which prompted me for a new password.  Set up new password but whenever I try and log into account I am not asked for password and ID it just automatically takes me there (so unable to switch accounts). 

    What do you mean 'not asked for password and ID it just automatically takes me there' ?
    If you are using your computer's iTunes then you can log out of an account via the Store > Sign Out menu option, that will then change to a Store > Sign In option
    Is that what you are doing ?

  • How do I turn off my auto-keyframing button in After Effects CC

    I know where the button is located but about 2 hours ago I opened after effects cc and the auto-keyframing button is stuck in the on position and I can't turn it off it just sits there illuminated and activated and won't respond to any of my inputs, can anyone help me please? even if it's just an idea or guess to fix it. thanks

    Hello,
    I've the same problem, could you let me know if and how you solved??
    Thanks!

  • How do I turn off "image auto-resizing"?

    After upgrading to version 3.6.3, the browser is now auto-scaling my images. I turned off "auto-resizing" on the About:Config page (in other words, setting that parameter to "false") but Firefox is still auto-scaling my images. How can I prevent this?
    == This happened ==
    Every time Firefox opened
    == I upgraded to version 3.6.3

    If you have set the pref '''browser.enable_automatic_image_resizing''' to ''false'' on the '''about:config''' page then Firefox shouldn't resize images.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
    See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
    .

  • How do i turn off sounds within itunes, such as the download complete sound and other sounds added with 11.11.1

    some of the sounds added with the latest addition of itunes are really annoying and suprising, especially when listening to music. how do i turn them off?

    What really cheeses me off here is that Apple isn't allowing users enough customization.  With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options.  If Apple keeps this up, they're going to start losing customers fast.  I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
    What I don't understand about how they won't let users delete the list of available podcasts now is why?  How is this making it a better program?  I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was).  But to not give users the option to delete that list?  It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating.  I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature.  It smacks of rank incompetence.
    What improvement were they trying to make here anyway?  There was nothing wrong to my mind about how podcasts were managed in previous versions.  Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
    And reverting to a previous version is no solution.  I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

  • How do I turn off that silly flash warning where the favicon is suppoed to be in the address bar

    I recently noticed that the powers that be at Mozilla are now dumbing down firefox to the level of AOL. They added a new 'protect me from myself' feature where there is a little icon in the address bar next to where the favicon is supposed to be that warns about a page using flash. REALLY? You think users are THAT stupid? How do I turn that off. It is so silly and stupid.
    BTW, PLEASE stop going down that path. The main reason FF has been superior is that it didn't try to warn me about every little thing on line and protect me from mys elf at every nook and cranny. Crap if you are going to continue this route why not make us type every single character three time and they confirm it with a yes/no dialog so we will be safe???

    Are there any messages about this plugin in Firefox/Tools > Add-ons > Plugins or on the about:plugins page?
    This icon at least let you see that plugins are present. If you set the default action to always activate then the plugin shouldn't be blocked.

Maybe you are looking for

  • Modest but important loss of photos

    After commiting the cardinal iPhoto sin of managing iPhoto functions in the Finder I found the suggestion here to create a new Library after saving the original and then importing files from old to new Libraries. After the import a window with many m

  • 1099 COPY B - Bursting by Vendor_ID

    Hi Friends! Does anyone knows if is possible to split the 1099 COPY B report by Vendor ID using "bursting" ? I've tried but appears that is not working because even after I set the bursting option by Vendor_ID, the process continues generating only o

  • UnmarshalException:error unmarshalling return;nested exception ClassNotFoun

    Hi, I have written a client for an enterprise application. The client communicates with the application using APIs provided by the application that internally make RMI calls to the application server. I am getting the following error when the client

  • Any iView to add WPC page in NW Portal 7.3?

    Hi All, Recently we have upgraded our portal from 7.0 to 7.3. In 7.0 i used to create an iView from com.sap.nw.wpc.runtime portal component,in the iView i use the RID of Compound Document to give the path of the WPC page in KM.Since i am adding WPC p

  • IPod touch won't install any apps,

    iPod touch cannot install apps,when I touch install it moves and can only see half of install.