How I fixed an "unkown error" problem when publishing to .Mac

I recently experienced the "unknown error" when attempting to publish my iWeb sites to my .mac account. The error popped up early in the publishing operation, on a site that I had published many times before. I looked around in my iWeb domain folder, and noticed this file:
~/Library/Application Support/iWeb/Domain.sites/cached_resources/configuration.apple.com/configuratio ns/internetservices/iapps/publishConfiguration.plist
Looking at the content (it contains XML data), it was obvious that the file was corrupt, with some data at the end missing. Maybe something went wrong when it was written. As it is in a directoy called "cached_resources", I figured, iWeb should be able to recreate it. So I quit iWeb, removed the file, restarted iWeb. Voila, the file was recreated, without corruption, and publishing works again without a hitch.

Might the error be -50?
See http://support.apple.com/kb/TS1583

Similar Messages

  • How to fix ipod unkown error 9

    how do i fix my ipod unkown error 9? the battery died and when i charged it to turn it on again it turned into a white screen, then i tried to restore it but it said that there was an error.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • How do I solve General Error problem when rendering and/or playing part of a sequence?

    Hi!
    All of a suddenly when I was editing, the General Error message appears. Now there's part of a sequence I cannot render nor play.
    I've restarted the application and the computer but without result. I've also cleared my render folder.
    Is there a solution to this problem?
    Best,
    Christopher

    I appreciate your respons, though it did not work for me.
    I've narrowed to problem down to a 5 sec clip of sound I have on the timeline, even after reconnecting that clip to a copy of the file it doesn't work. This has me perplexed.
    Thanks again!
    Christopher

  • How can i fix a 4280 error code when trying to burn cd's on itunes

    How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

    Did you by chance find out a solution with your problem?     I am having the same issue with the same drive.    I even uninstalled iTunes and completely reinstalled it.
    Thank you for any help anyone can offer.    I'm not having any luck finding answers on the net.     Thx.

  • How do I fix a 1611 error code when trying to restore my ipod?

    How do I fix a 1611 error code when trying to restore my ipod touch?

    Click here and follow the instructions.
    (120576)

  • TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

  • How to fix Acrobat 9 Standard freezing when I try to open a PDF form I created?

    How to fix Acrobat 9 Standard freezing when I try to open a PDF form I created?

    Hi jamesh,
    Considering the error 'licensing has stopped working', I would refer you to visit this KB doc link and try troubleshooting:
    Error "Licensing has stopped working" | Windows
    Regards,
    Anubha

  • Do anybody know how to fix an unknown error

    Do anyone know how to fix an unknown error #1439 on ipod classc?
    Why the option import cd is gone now if you Itunes 10.5?

    Hello there, please verify that you are using the latest version of iTunes.
    Try these steps
    Step 1. Connect a Ethernet cable to your macbook no wifi.
    Step 2. Open iTunes
    Step 3.Plug in your iPhone to your macbook
    Step 4.  Put the device into DFU mode.
    DFU MODE STEPS
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    You Should have black screen with nothing on the screen if done correctly.
    Step 5: iTunes will either prompt to restore and update click restore and update
    Just sit back and wait until you see the setup screen on your iphone if you still see error 53 is a hardware problem and needs to be replace by Apple.

  • How to fix 1604 &1603 error ipod touch 4g

    hi plz help me....how to fix 1604 & 1603 error.....ipod touch 4g ios 6.1.3

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?

    Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.

    Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
    http://docs.info.apple.com/article.html?artnum=93069
    I hope this helps other people!

  • How to fix the E225 error on the MF 4380 dn printer

    How to fix the E225 error on the MF 4380 dn printer

    Hi okekeP,
    The imageCLASS MF4380dn was not released by Canon USA in the United States, but was distributed in other markets such as Canada, Europe and Australia.  I would recommend to referring to the Canon support group for your geographical area to ensure the proper support application is being used for your product. However. I will be happy to offer some assistance.
    The closest US model would be the imageCLASS MF4370dn. The recommendation when the error occurs with this model is to perform a reset the product.  If you have not done so already, please attempt to reset your laser printer as outlined below:
    1. Disconnect the power cord attached to your machine while "on" for up to 10 minutes.
    2. Reconnect the power cord for the unit and plug it into a different known working outlet direct to the wall (not a surge/power strip) to ensure it is receiving full power.
    4. Once your unit has initialized, confirm an error is not displayed in the LCD.
    If unresolved, please refer to your Canon support contacts for further assistance and whether a firmware update may be available to address the issue or if service may be required.
    In case helpful to you, here are direct links to the product page for your laser product:
    - if your product was purchased in Canada, you can visit the product page for your laser device on the Canon-Canada website, www.canon.ca.
    - if your product was purchased in Australia, you can visit the Canon-Australia website, www.canon.au.
    - if purchased in Europe, you can visit the Canon-Europa website, www.canon-europe.com
    I hope this is helpful to you.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to fix Windows 7 error 126

    How do I fix Windows 7 error 126 when trying to open itunes

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100098)

  • My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    Hello wilsontot_too,
    Thank you for the details of the issue you are experiencing on your iPhone.  It sounds like you are not noticing transparency on your iPhone.  It may be that you have "Increase Contrast" turned on in your iPhone settings.
    I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
    iPhone User Guide - Large, bold, and high-contrast text
    http://help.apple.com/iphone/7/#/iph73b89c6
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

    how do you solve a error 1015 when restoring a iphone from recovery mode?

    This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
    This is the part you are looking for.
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported. 
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Maybe you are looking for

  • Use of Sequence in Match-Merge

    Dear All, I have a source table containing name and address data. I want to do householding, which means I need to split the data using a match-merge operator. The address data is the merged output, and the name data is the cross-reference output. Al

  • Cannot Export JPEG still picture from MPEG

    I am trying to use Quicktime Pro 7.1.3 to export a still picture (in JPEG format) from an MPEG video, but this is not working. I followed the directions in the QTPro User Guide: I play and then pause the video once it reaches the desired frame. Then

  • Firewire 800 Readers non-existent except on ebay for $169?

    Did someone stockpile them to sell them to mac users who don't have an express card slot in there mac seems crazy. Any comparisons on speed difference when reading from firewire 400/800 on high speed cards

  • Random number

    How to make sure the random number is positive??

  • Why does my PoP3 mail open in my gmail inbox

    There seems to be no system as to where my messages will open.