How I fixed my iTunes 7.5 issues on my iBook G4

My iTunes did not work right after installing 7.5. It showed broken links instead of pictures in the iTunes store and did not show scroll bars. After a few days of trying to install older versions without success I finally tried found the fix which might have already been posted but I never found it after looking through a ton of posts. All I did was to reinstall Quick Time but I choose the one special for Panther 10.3.9. This fixed it all and 7.5 works finally.
http://www.apple.com/support/quicktime/

bump
I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
Gateway 733mhz   Windows XP  

Similar Messages

  • Hello, I was wondering if anyone can tell me how to fix my itunes. When I was trying to download the new 1114 version, a window popped up saying R6034 C runtime library was incorrectly loaded. Then another window said iTunes not installed properly

    Hello,
    I was wondering if anyone can tell me how to fix my iTunes. When I tried to update to the latest version (1114) a window popped up saying R6034 C runtime library incorrectly installed. Then another window popped up saying that iTunes was installed incorrectly Error 7 (windows error 1114). Hope you can help.

    Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
         What went wrong was perhaps to fail to consolidate the library at first .

  • Do any of you guys know how to fix the: itunes cannot contact iphone software bc its not connected to internet

    do any of you guys know how to fix the: itunes cannot contact iphone software bc its not connected to internet

    Did you already try these suggestions?
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT4623 how to fix the itune error an unknown erroe occured (310)

    how to fix the itune error an unknown erroe occured (310)

    https://discussions.apple.com/message/24177027#24177027
    Can't connect to the iTunes Store

  • How I fixed my iTunes 7 / Nano 1.2 problem.

    Like so many of you, I too lost the ability to connect my 4gb Nano to my iTunes when I upgraded to v7. Of course, Apple hasn't figured this out yet, but several here have.
    Here is how I fixed mine. Once you connect the Nano (after the firmware upgrade), iTunes 7 reports it as corrupt and in need of a restore. The problem is that it won't. Try the following to fix the problem:
    (note: this will reset your Nano entirely, and you WILL lose any music which is loaded on it. You will not lose whatever you have in iTunes).
    1. Unplug the Nano USB cable and perform a reset on the Nano.
    2. Restart your computer to ensure all services are running correctly.
    3. Once restarted, open My Computer and plug in your Nano. Wait until it show's up as a disk drive (this can take several minutes).
    4. Right-click on the drive which represents the Nano and wait again (up to several minutes) for the menu to pop up.
    5. Select Format and (you guessed it) wait for the format utility to appear.
    6. Make sure the File System is set to FAT32 then click Start. Do not click Quick Format. Wait some more (up to ten minutes. You'll see the progress bar move after a while).
    7. Once finished, the Nano should now be recognized by iTunes. If it isn't, unplug it, wait a minute and replug it.
    BTW, this retains the 1.2 firmware. I think the 1.2 firmware is incompatible with the data which written by previous versions. The format clears this data out.
    As always, YMMV.
    Good Luck,
    Steve
    HP   Windows XP Pro   P4 H/T

    bump
    I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
    Gateway 733mhz   Windows XP  

  • How to fixed stuck itunes logo after updating ios

    after i upadte it last 3 days only the itunes logo appear. i try to do the things that i saw in the net like pressing the home button and power and using the itunes but then uit doesnt work...i installed a latest version of itunes and only error appears it not even restore...pls someone know how to fixed it?thnx in advance

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Fix for iTunes Space Calculation Issue in Windows 7?

    I moved my iTunes library from a Windows XP, to Windows 7 PC.  It is a little smaller in the Windows 7 environment because I deleted all of my Podcasts, some Video, and Picture files.  Even with the deletions the space calcuation in Windows 7 is incorrect, and my iPhone4 fails to sync.  I can move back to the XP environment and sync without any issues.
    When is this issue getting fixed?

    Well *** Apple.  Still no fix in iTunes 10.6.1.7.  UNACCEPTABLE.
    You know there is an issue but sit and ignore it.
    Great customer service and support.

  • How to fix "use itunes to restore" problem on my iPod Classic 160G?

    When I try to connect my iPod to iTunes on my PC, there was an alert to restore. I follow the direction. Stage 1 of the restore process was successful. But the Stage 2 of the restore process, when the iPod displays an Apple logo as well as a progress bar in off backlight work so long time. Then I shutdown my PC. After that my iPod does not work. When I re-connect to PC there are appear "use itunes to restore" and "do not disconnect" alternately.How to fix the problem?
    <Edited By Host>

    for some reason when itunes first installs a new version, it opens up to the iTunes Store. Since you don't have net connection, its going to error out.
    But the fact that you can't see any of the other items, I would recommend redownloading iTunes (and Quicktime to be sure) and reinstalling it and see if that helps.
    Just for the record, can you click on the Library icon?

  • How I fix my account e-mail issues?

    I have a skype account that I don't know if it has a actual skype name or not, I login on it using Live (I came from MSN Messenger actually).
    I am trying to change the e-mail to one that actually exists (the e-mail provider I used to create my messenger account was shut down), but it requests a password, but when I put the same password I use to login it does not work...
    So, I have that password, let's call it 123456 (obviously that is a fake password to explain stuff).
    I can login on the Skype Desktop, and on Windows Live with 123456
    I CANNOT change my e-mail with 123456
    I cannot request a new password, because my e-mail don't exist.
    How I fix this?

    Brooklyn Jack wrote:
    how do i update my account e-mail address on my iphone.  the old address is grayed out and i can't seem to update the address to my my verison account.
    You may have Setting changes disabled in Settings/General/Restrictions.

  • I know how to fix the iTunes 7 / firmware ver. 1.2 freeze problem

    Many of you (like me) are having major headaches because of the new updates that Apple has been releasing (i.e. iTunes 7). So far I only know that this affects the Video iPod, but this could very well fix other models too.
    Here are some symptoms of what the following will fix, and what you most likely have already done to try and fix it.
    - iPod keeps freezing after a few seconds ever since you updated to iTunes 7 and/or iPod software ver. 1.2.
    - iPod will remain in Do Not Disconnect mode even after ejecting or disconnecting
    - A forced reset does not fix it, as it repeats the above.
    - Restoring the iPod through iTunes does not help
    So, here's what to do.
    The old iPod updater software is how you will fix all of this. Unfortunately, because iTunes 7 thinks that it's better and more up to date, it will prevent you from opening the old version of the software if you still have it on your machine.
    So first of all, uninstall iTunes 7.0. (You do not have to remove your library information, just the software.) Restart the computer.
    If you still have the old iPod updater, try it and see if it runs. If it does, read on. If not, skip to the next paragraph. So, if it does run, simply hit Restore and you can go back to a previous version of the firmware. I believe that Apple discontinued the firmware page since releasing iTunes 7. Look around some search engines like Google if you really want the latest firmware.
    Take out the installation CD that came with your iPod. Run it and it should install the old iPod updater along with iTunes 6.x. iTunes 6.x cannot run since iTunes 7 changed your libary's formatting, but that will not be a problem. Run the Restore process in the old updater and it should be alright for you to start loading your stuff on again without problems.
    Since iTunes 7 reformatted your libary listing, iTunes 6 will no longer work. However, you can still use it by reinstalling iTunes 7. Just make sure you do the following.
    TO KEEP THE SAME THING FROM HAPPENING AGAIN
    iTunes 7 is actually alright. It's the updater part of it that will screw up your iPod.
    - iTunes 7 will tell you that a new iPod software version is available when you open it.
    - Check the "Never Ask Again" box and click Don't Install.
    - When you sync your iPod to your computer, NEVER touch the Version section when you're changing your iPod's settings. Everything else is alright to work with.
    - Everything will work fine as long as you never update the iPod's software via iTunes, at least until the programmers can fix this issue in a later release or patch.
    I hope this helps out a lot of you. Pretty lame of Apple to miss something this big during debugging.
    Custom Windows XP

    Listen to this person, he knows exactly what he's talking about. My unit had the freezing problem, the visual artifact problem, and eventually would only show a blank white screen after I had tinkered too long. Luckily I have another computer that I hadn't yet upgraded to itunes 7 and it had the last firmware upgrade before the itunes 7 one. From disk mode I was able to restore it to the previous firmware version, and now the ipod works perfectly.
    I too am almost disqusted with Apple for 1) missing this problem and 2) not letting people know!
    I wonder how many more people are going to have lots of problems so apple can protect their PR.
    Anyways, what would be really helpful would be if someone could upgrade the latest firmware installer before itunes 7 (it's an individual ipod updating program, not itunes 6.xx)somewhere on the internet so users could download it and do away with this evil 1.2 firmware.

  • TS1717 how to fix my itunes

    my itunes won't load up because of this "accessing itunes store" and when i try canceling this, that loads up forever...how can this be fixed bv

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • How to fix huge iTunes memory leak in 64-bit Windows 7?

    iTunes likes to allocate as much as 1.6GB of memory on my dual-quad XEON 8GB 64-Bit Windows computer and then becomes unresponsive.
    This can happen several times a day and has been going on for as long as I can remember.  No other software that I use does this - only Apple's iTunes.  Each version I have installed of iTunes appears to have this same memory leak.  Currently I am running version 10.7.0.21.
    I love iTunes when it works.  But having to constantly kill and relaunch the app throughout the day is bringing me down.
    Searching for a fix for this on the internet just surfaces more and more complaints about this problem - but without a solution.
    Having written shrinkwrapped software for end users as well as for large corporations and governments for more than 25 years I know a thing or two about software.  A leak like this should take no more than a day or two to locate using modern software tools and double that to fix it.  So why with each new version of iTunes does this problem persist?  iTunes for Windows is the flagship software product Apple makes for non-Mac users - yet they continue to pass up each opportunity they have had over the years with each new release to fix this issue.  Why is this?
    Either the software engineers are not that good or they have been told NOT to spend time on this issue.  I personally believe that the engineers at Apple are very good, and therefore am left thinking that the latter is more likely the case.  Maybe this is to coax people to purchase a Mac so that they can finally run iTunes without these egregious memory leaks.  I would like to offer another issue to consider.
    Just as Amazon sold Kindles and Google sold Nexus tablets at low cost - not counting on margin for profit - but instead they wanted to saturate the marketplace with tools for making future purchases of content almost trivial to do with their devices.  Apple also counts on this model with their pricer hardware - but they also have iTunes.  Instead of trying to get people to switch to a MAC by continuing to avoid fixing this glaring issue in iTunes for Windows I would like to suggest that by allowing their engineers to address this issue that Apple will help keep Windows users from jumping ship to another music app.  The profit to be made by keeping those Windows users happy and wedded to the iTunes store is obvious.
    By continuing to keep this leak in iTunes for Windows all it does is lower my esteem for the company and start to make me wonder if the software is just as buggy on Macs.

    I have same issue. Ongoing for more than 1 year and currently running iTunes 11.3.
    My PC is Dell OptiPlex 990 I7 processor, 8GB ram, W7 64 [always keep things patched up to latest OS updates etc]
    I use this iTunes install to stream music videos etc to multiple appleTVs, ipads, iphones etc .. via Home Sharing
    Store all my media including music, videos and apps on separate NAS  .. so the iTunes running on PC is only doing the traffic cop role and streaming / using files stored on NAS .. creates lots of IO across my network
    Previous troubleshooting suggest possible contributing causes include
    a) podcast updates  .. until recently I had this auto updates on multiple podcast subscriptions, presumably the iTunes would flow this from the PC to save on the NAS across the network .. if the memory leak is in the iTunes network communication layer (?bonjour?)  this may be sensitive to IO that would not normally occur if the iTunes file saving was local on the same PC
    b) app updates .. have 200+ apps in my library and there is always a batch of updates .. some updates 100s of MB is size .. routinely see 500MB to 1GB of updates in single update run .. all my apps are
    c) streaming music / movies .. seems when we ramp up streamlining of music or movies . memory leak grows faster .. ie within hours of clean start
    c) large syncs of music or videos to ipads or iphones .. noticed that get big problems when I rebuild an ipad .. I typically have 60+ GB of data in terms of apps /  music / videos to load .. have to do rebuild in phases due to periodic lockups

  • How I fixed the iTunes 7.5 installation error

    Hello, just wanted to say that after two days I figured out an easy way to fix the problem I had after downloading iTunes 7.5. I was getting an buffer overrun error on QuickTime and knew that iTunes wouldn't open because of QuickTime. I re-installed iTunes and went into safemode and deleted everything that referenced QuickTime. Then I downloaded an older version of QuickTime here:
    http://www.apple.com/support/downloads/quicktime72forwindows.html and after that was able to open iTunes. Good luck to everyone. After reading the boards for two days I know that I'm not the only one with this issue.

    Hi Niel,
    I tried the instructions and I received another message which said: "The module ".d11" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found." Thank you for responding! Any other suggestions for this issue? Help!

  • How i fixed my Itunes sound (windows)

    Hello,
    I along with many members of this forum have been having serious sound issues. I have somehow managed to fix it tonight, as well at quicktime playing the distorted green videos. I did 3 things, and i dont know which 1 did it, but i encourage everyone to try all 3.
    1) Reinstall your sound drivers (I have an Audigy 2 ZS)
    2)Open quicktime settings and click advanced at the top, then click "empty cache" and check the box saying "enable playback of flash tracks"
    3)Redownload DirectX9 and run it. When you open it, it will almost instantaneously say completed, but do it anyways. Reboot the computer and try
    Please let me know if this helps anyone, I hope this can fix it for some of you!

    bump
    I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
    Gateway 733mhz   Windows XP  

  • Who knows how to fix the iTunes Festival app? It doesn't stream or show any videos available!

    Neither my Apple TV app, nor iOS app work.. moreoever, the festival page on the iTunes store doesn't work either! I already missed a few of my fave bads and I can't watch them on demand! just a black screen appers on the iOS app, or sayd Error in the AppleTV! Please help!

    Does anyone in the community have insite into this issue (same with animation compressed QT's). Is this just the way it is moving forward (a terrible thing) or is it a bug that will be fixed in the near future. Apples silince on if this is a "feature" or a "bug" is frustrating.
    Thanks.
    Lawrence

Maybe you are looking for