How I fixed my Toshiba Satellite sound distortion problem

I've been trying to get the garbled sound recording problem fixed on my Satllite L745-S4210 for months. I have been on this forum and other forums. Alot of people have given me their time trying to fix it, but I managed to do it myself. In the Microphone Properties Advanced Section is a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!

Satellite L745-S4210
garbled sound recording ... a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
Thanks for that contribution.
The box should be labeled "enable garbled recording."
-Jerry

Similar Messages

I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

JoBautista,
you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

How I fixed my 5g's 1.2 'problem'

Ok folks, no rocket science here, but I have been given all sorts of weird and wonderful advice this week about how to fix my 'sounds awful since the 1.2 update' 5G 60GB Ipod, everything from use ipodwizard, it's a hardware fault, to check your fung shieu man,
I've just done this fix and my ipod does everything it used to before 1.2 broke it.
1. Using windows add/remove programs I removed Itunes 7.1
2. I then downloaded Itunes 6.0.5.2 and installed it (it wont run after as your library was saved using itunes 7, so dont bother trying)
3. Then I downloaded / installed / ran Ipod updater 2006-06-28. When it conects to your ipod it will say software is upto date and so install button is greyed out , click restore instead.
4 The ipod will now be left with the old firmware on it (hurrah).
5. Now download and install the new Itunes 7.1 again.
6. When it prompts you to update the firmware on your ipod shout very loudly 'You have got to be b-l-o-o-d-y kidding' and DONT update it.
7. uncheck manage music manually, uncheck disk use, click apply and your ipod will fill its little self back up.
8. NEVER EVER UPDATE THE FIRMWARE again
9. BUY MS's Zunes player ASAP, especially if you have a 360
Like I said this was way easy, but after following many other well meant pieces of advice that didn't work, this was the one thing that did

Here is the updater for Windows
http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
G5 Dual 2.0 Mac OS X (10.4.7)

Toshiba Satellite battery/AC problems?

After days of agony, I broke down and order a new AC adapter and battery for the Toshiba Satellite from Amazon (which cost about $20 for both, new, including free shipping; Toshiba wants over a $100 for the battery and nearly the same for the AC adapter). Anyway, I also ordered new systems recover disks (which cost more than both the above two items). After going through hell--since the instructions on the disks didn't work--I finally got the new system installed--no thanks to the instructions. But the problem is this: when I boot up with just the battery, everything works fine. When I tried booting with the AC adapter plugged in, it doesn't boot up. Both the battery and AC adapter are new. What's going on?

yes, unfortunately Peter. But it's not worth it. New ones are about $329 at Office Depot and it still works in Safe Mode with Networking with the AC plugged in--which makes me think it's a driver problem. Ah well, It's a better option than having it serviced.

How to fix 10.4.6 network permissions problems

Here is how to fix it problems with 10.4.6 and network permissions. It isn't a permission problem, per se, but rather the fact that 10.4.6's network permissions improvements also cause it to respect the Locked file flag. You could manually unlock files and folders, but for most people that is impractical. It will be much faster if you run this from the server (find/install the appropriate version of the developer tools - Tiger version of Xcode will not run on Panther - on a client machine and copy /Developer/Tools/SetFile on to the server). Also, I would try the first one first and only do the second if you are still having trouble.
For changing directories, run this from the command line, filling in the path to your network volume (any spaces will require you to enclose the path in quotes):
find [path to network volume] -type d -exec /Developer/Tools/SetFile -a l {} ';'
For example,
find "/Volumes/Network Share" -type d -exec /Developer/Tools/SetFile -a l {} ';'
If you are having trouble with files as well, execute:
find [path to network volume] -exec /Developer/Tools/SetFile -a l {} ';'
Cheers,
Nathan

Hi Nathan,
I want to ask you do I run
find "Volumes/Network Share" -type d -exec
/Developer/Tools/SetFile -a | {} ';'
everytime I login the the network volumn? Then next time when I login to the network server, the server will not be locked. Or I have to run this everytime?
Thanks,
Eleanor

How to fix iphone 4s (searching..) problem after screen replacement

I had a black iPhone 4S that had a cracked screen and I decided if I was going to change the screen i also want to change my iPhone white too but when I finished the whole process my iPhone kept saying (searching..) for signal no matter if there was a SIM card in or not. I also went back into the phone and checked if any cables or antenna cables were not put in and it seems like I put them in all right.. But I just need help how to fix my iPhone to read the SIM card..
PLEASE HELP..

An iPhone that is ineligible for warranty service may be eligible for Out-of-Warranty (OOW) Service. For example, an iPhone that has failed due to damage or liquid damage is ineligible for warranty service but eligible for OOW service. However, certain damage is ineligible for OOW service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. Please see Apple's Repair Terms And Conditions for further details."
My emphases. Opening an iPhone is not necessarily a Good Thing.

How to FIX your iPhone 3G and iOS4 PROBLEMS!

Does anyone know how to fix my crippled iPhone 3G after I updated to 4.0.1?

The only way to go back to the old software has been described for you. It is not officially sanctioned by Apple. They do not provide a way to go back to former software. There is not currently a fix in iTunes, as the only thing iTunes does is provide a conduit for you to update firmware.
As provided before, Apple is addressing the issues with 3G and 3GS phones running slow with iOS4. According to developers with access to the iOS4.1 beta, it has been addressed there. You will have to either try the Genius bar as suggested, and I understand the distance issue, or you will have to wait for iOS4.1 to be released. If a restore as a new phone and a DFU restore do not work, then I'm not aware of any other alternative except what was provided above.
Edit: You might try and delete the iOS that you have on the computer and let iTunes download a brand new one. That might help.
Message was edited by: ChrisJ4203

How to fix the music and sound browser in final cut pro x

When i try to play a music or sound it will not play it in final cut pro x , I can play music or sound in Imovie 11 and work good , so not sure what the problem is,

Might want to check the FCPX forum - that's where the experts hang out.
Clinton

How to config Touchpad Toshiba Satellite Pro C640 (PSC2VL)

This is file /var/log/Xorg.0.log (full here: http://pastebin.com/VJucuxa2):
[ 13.225] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 13.225] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 13.225] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Synaptics touchpads"
[ 13.225] (II) LoadModule: "synaptics"
[ 13.225] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 13.262] (II) Module synaptics: vendor="X.Org Foundation"
[ 13.262] compiled for 1.12.2, module version = 1.6.2
[ 13.263] Module class: X.Org XInput Driver
[ 13.263] ABI class: X.Org XInput driver, version 16.0
[ 13.263] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 13.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.263] (**) Option "Device" "/dev/input/event7"
[ 13.263] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 13.263] (**) Option "EmulateTwoFingerMinZ" "40"
[ 13.263] (**) Option "EmulateTwoFingerMinW" "8"
[ 13.263] (**) Option "VertEdgeScroll" "on"
[ 13.263] (**) Option "HorizEdgeScroll" "on"
[ 13.263] (**) Option "HorizTwoFingerScroll" "on"
[ 13.263] (**) Option "TapButton1" "1"
[ 13.263] (**) Option "TapButton2" "2"
[ 13.263] (**) Option "TapButton3" "3"
[ 13.263] (**) Option "CircularScrolling" "on"
[ 13.263] (**) Option "CircScrollTrigger" "2"
[ 13.263] (**) Option "CoastingSpeed" "0"
[ 13.263] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 13.263] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 13.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 13.263] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 13.263] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 13.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 13.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 13.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 13.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 13.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.264] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 13.264] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 13.264] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 13.264] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.264] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/mouse0"
[ 13.264] (EE) evdev: SynPS/2 Synaptics TouchPad: ioctl EVIOCGID failed: Inappropriate ioctl for device
[ 13.264] (EE) PreInit returned 8 for "SynPS/2 Synaptics TouchPad"
[ 13.264] (II) UnloadModule: "evdev"
This is file /etc/X11/xorg.conf.d/10-synaptics.conf:
Section "InputClass"
Identifier "Synaptics touchpads"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on"
Option "HorizEdgeScroll" "on"
Option "HorizTwoFingerScroll" "on"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "2"
Option "EmulateTwoFingerMinZ" "40"
Option "EmulateTwoFingerMinW" "8"
Option "CoastingSpeed" "0"
EndSection
This is file /etc/X11/xorg.conf.d/10-evdev.conf:
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
# MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Pleases help me, thanks !

# cat /proc/bus/input/devices
# cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Toshiba input device"
P: Phys=toshiba_acpi/input0
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=kbd event5 rfkill
B: PROP=0
B: EV=13
B: KEY=40000 10000 1c00000000 0 0 1501f00002000 3809604001 2000000000000 0
B: MSC=10
I: Bus=0001 Vendor=14f1 Product=506e Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=10f1 Product=1a34 Version=6207
N: Name="TOSHIBA Web Camera"
P: Phys=usb-0000:00:1a.0-1.3/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=09da Product=054f Version=0111
N: Name="A4TECH USB Device"
P: Phys=usb-0000:00:1d.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
U: Uniq=
H: Handlers=kbd event9 js0
B: PROP=0
B: EV=12001f
B: KEY=4c37fff072ff32d bf54445600000000 c00000000000001 30c100b17c007 ffa67bfad951dfff febeffdfffefffff fffffffffffffffe
B: REL=40
B: ABS=ffffff01000701ff
B: MSC=10
B: LED=1f
I: Bus=0003 Vendor=09da Product=054f Version=0111
N: Name="A4TECH USB Device"
P: Phys=usb-0000:00:1d.0-1.1/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input10
U: Uniq=
H: Handlers=mouse1 event10
B: PROP=0
B: EV=17
B: KEY=ffff0000 0 0 0 0
B: REL=143
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=1c4f Product=0003 Version=0110
N: Name="SIGMACHIP Usb Mouse"
P: Phys=usb-0000:00:1d.0-1.2.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input12
U: Uniq=
H: Handlers=mouse2 event12
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
xinput -list
# xinput -list
No protocol specified
Unable to connect to X server

Sound distortion problems, help p

Hi I recently bought the Sound Blaster X-Fi Xtreme audio but i've been having problems with it. First of all i installed the sound card. Then when turning computer back on i went into bios and disabled the audio function thats in the integrated peripherals then saved and exited. When i got onto my desktop i installed all the drivers and was prompted to restart my computer when i did another driver update came up and i was prompted to install that (even though it says vista at the top and i have xp...) anyways i installed it and restarted my computer again. This time my desktop wouldnt come up. Instead i was brought to a blue screen that said windows has been disabled to prevent any physical damage or sumtin like that. I tried everything but it kept going to that screen. So i took the sound card out, enabled my integrated sound card and started up comp. It worked. So I tried again, installed sound card and disabled integrated sound card when i got to windows i installed drivers and all and now everything works but theres a problem. The sound is a little distorted. Its off and on too, like sometimes when im listening to music the bass is HORRIBLE then other times its ok. Volume doesnt affect it though so i dont know what is changing it. Ventrilo always sounds bad, when i switch channels the robot voice has a crappy echo and sounds terrible. A few other weird things that went on was when i tried installing the sound card a second time i uninstalled the realtek hd audio thing that came on comp and i had on board sound disabled...even still i heard sound (this was before i put my sound card in that second time) So if your still reading this any tips? I think what might be the problem is my on board sound and the sound blaster x-fi are playing at the same time since i couldnt ever figure out how to make my sounds stop. I dont know too too much about comps though so who knows. Tnx for reading.
ALSO im not using a usb headset i've got the plugs going into my sound card...

So this distortion occurs on all songs from any
playlist but didn't use to be present on the same
songs?
MB67
exectly,
every song now has a click click click click sound at the start and during the song and a small hissing sound during the song. Very strange and weird.
Any suggestions welcome

How to fix InDesign CS5 install/program-opening problems the "right" way?

After my second install of CS5 Design Premium, I was still having all sorts of problems with opening programs. InDesign was especially troublesome and I posted my woes at the bottom of this thread: http://forums.adobe.com/thread/661059?tstart=0
John Hawkinson (presumably an Adobe employee) kindly replied suggested I start a new thread so he could help me debug properly. So while the iron is hot...I'm ready...let's debug. Can it be done in an hour?
Other comments from John H.:
"You should realize that removing the welcome screen plugin is not supported and can come back to bite you later on. It would be better to fix it properly. Probably by reinstalling InDesign."

After about a minute though, the program opened, welcome screen and all...
Oh dear. Well, then I guess it's not stuck.
So, we know it's not specific to your customizations from CS3 or otherwise, since it doens't affect your new user. So it's either something about InDesign's installation on your machine, or something about your machine in general.
I forgot to ask: Do you have any font management software installed? Have you tried disabling it? That has been the source of a variety of problems... One of the things InDesign does at startup is enumerate all the fonts on your system. Do you have a really large number?
How about any plugins for InDesign or other software that modifies its behavior?
I am mostly out of ideas. Your Sample Process output is not very informative to me. It looks like it is in the midst of calls to the operating system (all the CF* stuff is Apple's CoreFoundation code), rather than inside InDesign's code itself. Which could implicate...the operating system's font subsystem, graphics subsystem, or, well, almost anything.
I'm afraid I'm almost out of ideas. It would seem pointless to suggest you replace your preferences, since you started out with a clean user account.
You can certainly de-install CS5 and run the CS5 Cleaner Tool and then reinstall. No promises that it would work, though, it might just be a waste of your time
If you're feeling really exciting, the only other thing (other than the above) that I would try would be to go the Activity Monitor, and choose View > Send Signal to Process and choose Abort (SIGABRT). That will force InDesign to crash. The crash report may be a bit more insightful than the call graph from the Sample Process. Though it'll be frozen at an instant in time, so it might not reflect what's going on during the bulk of the rainbow-wheeling. Anyhow, the relevant section is the "Thread 0 Crashed: " portion and the lines that follow until Thread 1.
I suppose it might be possible to instrument the CoreFoundation calls with dtrace. That's definitely not something I've done and it's probably easier to take out the WelcomeScreen plugin and soldier on. Hopefully something along the way will help before you get that far.
And of course, you can open an official support case with Adobe...

[SIS Series] Sound distortion problems

This computer is 3 years old. I got it from new. Every 6 months I have stripped it out completely to get evrything cleaned. It has always been no problem . This time though when I started it up the sound was distorted as though there was a problem with the speakers. I tried the audio on the Monitor speakers and the result was the same. So that ruled out the speakers. I done a re-run and stripped everything out and reinstalled it again but still the same sound problem. Below are the specs. Can anyone help me with this problem. Could it be the processor as I inadvertently bent one of the pins, tried to straighten it and it came off. Or is the Motherboard on the way out.
Operating System   Microsoft Windows XP Home Edition
OS Service Pack   Service Pack 2
DirectX   4.09.00.0904 (DirectX 9.0c)
Computer Name   DEEPSEA (Top Dog)
User Name   Barney
Motherboard
CPU Type   Intel Pentium 4, 1900 MHz (19 x 100)
Motherboard Name   MSI MS-6533(G) (3 PCI, 1 AGP, 1 CNR, 2 DIMM, Audio)
Motherboard Chipset   SiS 645DX
System Memory   512 MB (DDR SDRAM)
BIOS Type   Award Modular (08/13/02)
Communication Port   Communications Port (COM1)
Communication Port   Communications Port (COM2)
Communication Port   ECP Printer Port (LPT1)
Display
Video Adapter   NVIDIA GeForce4 MX 420 (64 MB)
3D Accelerator   nVIDIA GeForce4 MX 420
Monitor   Proview LCD 15-inch 568/BMM568 [NoDB] (1242235441)
Multimedia
Audio Adapter   SiS 7012 Audio Device
Storage
IDE Controller   SiS PCI IDE Controller
SCSI/RAID Controller   VOB InstantDrive Controller
Disk Drive   ST380020A (80 GB, 5400 RPM, Ultra-ATA/100)
Disk Drive   Maxtor 6B160P0 (160 GB, 7200 RPM, Ultra-ATA/133)
Disk Drive   HP PSC 2355 USB Device
Optical Drive   AOPEN CD-RW CRW5224 (52x/24x/52x CD-RW)
Optical Drive   DVDRW IDE 16X
Optical Drive   VOBID InstantDrive CD SCSI CdRom Device
SMART Hard Disks Status   OK
Partitions
C: (NTFS)   40962 MB (30883 MB free)
D: (NTFS)   33973 MB (29625 MB free)
E: (FAT32)   1377 MB (126 MB free)
I: (NTFS)   156327 MB (143043 MB free)
Total Size   227.2 GB (198.9 GB free)
Input
Keyboard   Easy Internet Keyboard
Mouse   PS/2 Compatible Mouse
Network
Network Adapter   Realtek RTL8139/810x Family Fast Ethernet NIC (82.0.176.167)
Modem   Creatix V.9X DSP Data Fax Modem
Peripherals
Printer   HP PSC 2350 series
USB1 Controller   SiS 7001 PCI-USB Open Host Controller
USB1 Controller   SiS 7001 PCI-USB Open Host Controller
USB Device   HP PSC 2350
USB Device   PSC 2350 series (DOT4USB)
USB Device   USB Composite Device
USB Device   USB Mass Storage Device
USB Device   USB Printing Support

**I coudnt understand what you said about putting another proccessor and grafhics on the monitor?Is the sound ok when you put another processor?**
I tried a friend's processor on my own machine, when I started up it seems that all I got was the fan running. No sound and nothing showing on her monitor. Now that I think about it, I should have tried my processor on her computer.
At the end of the day my only option is to get a sound card and set it up. At least going this way I will still have the problem in the background and will still try to get to the bottom of it. If I don't get a card I would probably get rid of the computer as buying a new pc would be just as cheap as buying a motherboard & processor.
Thank you for your time & directions on installing the card.
If I get it sorted I will let you know

Sound Distortion problems w/ lower frequency tones/instuments

I've been ending up with a lot of distortion in tracks when I bounce them over to Itunes. Primarily w/ lower frequency notes on bass and various pads - it's frustrating to have to adjust all the levels to lose the distortion. I obviously don't want to have to avoid using lower tones in tracks.
Am I stuck just filtering and adjusting eq's or is their an easier option?
Thanks in advance all.

What the best way is to avoid distortion w/ lower frequencies?
The likely source of your distortion is too hot of an output level. You might try using compression or limiting to keep those low-frequency levels under control. Other than that, you just have to adjust individual track levels so that you get a good overall level without distortion. EQ can also help if a certain frequency range is too hot compared to everything else.

TS3540 How to fix iTunes 11.0.4 (62) problem of won't connect or recognize iOS devices iPhones, iPads, iPod

It appears that there is a flaw in the Apple iTunes 11.0.4 (62) installer related to mobile devices and the USB port. The below fixed the problem for me.
The symptom was iTunes 11.0.4 (62) was not connecting to my son's iPodTouch 1st Generation. Many other iPad, iPods and iPhones are reporting having this problem on many different computers both Mac and Windows. >56,000 on Apple discussion forums.
The iPodTouch was recognized by the computer and would charge but iTunes would not recognize the iPodTouch.
All of our family's other iOS devices worked fine.
The problem is not the computer, the cabel, the OS or the device.
Apple's suggestions in various tech docs did not solve the problem in and of themselves. I had to go back down to the previous version to force the current version to reinstall properly:
Deleting iTunes 11.0.4 (62) and reinstalling did not solve the problem.
Deleting iTunes 11.0.4 (62) and installing iTunes 10.7 made Will's iPodTouch connect fine but then there were other problems.
Deleting iTunes 11.0.4 (62) and installing iTunes 10.7 and deleting iTunes 10.7 and reinstalling 11.0.4 (62) solved all problems.
To Reinstall iTunes: (from Apple docs)
Quit iTunes
Delete:
/Applications/iTunes
/System/Library/Extensions/AppleMobileDevice.kext
/System/Library/PrivateFrameworks/MobileDevice.framework
/System/Library/LaunchDaemons/com.apple.usbmuxd.plist~orig
but do not delete com.apple.usbmuxd.plist
Restart
Reinstall iTunes version desired
Open iTunes to test and make sure iOS devices connect
Restart
Open iTunes to test and make sure iOS devices connect

Hey mkpack,
I would run through the recommended troubleshooting steps in this link:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
All the best,
Delgadoh

How I fixed my Toshiba Satellite sound distortion problem

Similar Messages

Maybe you are looking for