How I fixed the iTunes 7.5 installation error

Hello, just wanted to say that after two days I figured out an easy way to fix the problem I had after downloading iTunes 7.5. I was getting an buffer overrun error on QuickTime and knew that iTunes wouldn't open because of QuickTime. I re-installed iTunes and went into safemode and deleted everything that referenced QuickTime. Then I downloaded an older version of QuickTime here:
http://www.apple.com/support/downloads/quicktime72forwindows.html and after that was able to open iTunes. Good luck to everyone. After reading the boards for two days I know that I'm not the only one with this issue.

Hi Niel,
I tried the instructions and I received another message which said: "The module ".d11" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found." Thank you for responding! Any other suggestions for this issue? Help!

Similar Messages

Do any of you guys know how to fix the: itunes cannot contact iphone software bc its not connected to internet

do any of you guys know how to fix the: itunes cannot contact iphone software bc its not connected to internet

Did you already try these suggestions?
iOS: Troubleshooting Wi-Fi networks and connections

HT4623 how to fix the itune error an unknown erroe occured (310)

how to fix the itune error an unknown erroe occured (310)

https://discussions.apple.com/message/24177027#24177027
Can't connect to the iTunes Store

I know how to fix the iTunes 7 / firmware ver. 1.2 freeze problem

Many of you (like me) are having major headaches because of the new updates that Apple has been releasing (i.e. iTunes 7). So far I only know that this affects the Video iPod, but this could very well fix other models too.
Here are some symptoms of what the following will fix, and what you most likely have already done to try and fix it.
- iPod keeps freezing after a few seconds ever since you updated to iTunes 7 and/or iPod software ver. 1.2.
- iPod will remain in Do Not Disconnect mode even after ejecting or disconnecting
- A forced reset does not fix it, as it repeats the above.
- Restoring the iPod through iTunes does not help
So, here's what to do.
The old iPod updater software is how you will fix all of this. Unfortunately, because iTunes 7 thinks that it's better and more up to date, it will prevent you from opening the old version of the software if you still have it on your machine.
So first of all, uninstall iTunes 7.0. (You do not have to remove your library information, just the software.) Restart the computer.
If you still have the old iPod updater, try it and see if it runs. If it does, read on. If not, skip to the next paragraph. So, if it does run, simply hit Restore and you can go back to a previous version of the firmware. I believe that Apple discontinued the firmware page since releasing iTunes 7. Look around some search engines like Google if you really want the latest firmware.
Take out the installation CD that came with your iPod. Run it and it should install the old iPod updater along with iTunes 6.x. iTunes 6.x cannot run since iTunes 7 changed your libary's formatting, but that will not be a problem. Run the Restore process in the old updater and it should be alright for you to start loading your stuff on again without problems.
Since iTunes 7 reformatted your libary listing, iTunes 6 will no longer work. However, you can still use it by reinstalling iTunes 7. Just make sure you do the following.
TO KEEP THE SAME THING FROM HAPPENING AGAIN
iTunes 7 is actually alright. It's the updater part of it that will screw up your iPod.
- iTunes 7 will tell you that a new iPod software version is available when you open it.
- Check the "Never Ask Again" box and click Don't Install.
- When you sync your iPod to your computer, NEVER touch the Version section when you're changing your iPod's settings. Everything else is alright to work with.
- Everything will work fine as long as you never update the iPod's software via iTunes, at least until the programmers can fix this issue in a later release or patch.
I hope this helps out a lot of you. Pretty lame of Apple to miss something this big during debugging.
Custom Windows XP

Listen to this person, he knows exactly what he's talking about. My unit had the freezing problem, the visual artifact problem, and eventually would only show a blank white screen after I had tinkered too long. Luckily I have another computer that I hadn't yet upgraded to itunes 7 and it had the last firmware upgrade before the itunes 7 one. From disk mode I was able to restore it to the previous firmware version, and now the ipod works perfectly.
I too am almost disqusted with Apple for 1) missing this problem and 2) not letting people know!
I wonder how many more people are going to have lots of problems so apple can protect their PR.
Anyways, what would be really helpful would be if someone could upgrade the latest firmware installer before itunes 7 (it's an individual ipod updating program, not itunes 6.xx)somewhere on the internet so users could download it and do away with this evil 1.2 firmware.

How To Fix: "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."

I can't reopen my iTunes after I have to force quit when it does not respond. I get this message:
"The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."
I've read to do the solutions. I right clicked on both the iTunes and Music folder and went to info for each. On both the lock at the bottom of the Get Info was locked. All of my users including admin can read and write all files within those folders. They are even a shared folder. I clicked on the lock to unlock it, typed in my admin password, and went to the gear to apply to all files inside. After doing that I keep getting the saved message.
I tried another way that I've found online to move my ituneslibrary folder to the desktop and then open my iTunes. In theory the iTunes is supposed to ask for where the iTunes library is. Once that is prompted you quit iTunes and drag the iTunes Library folder back to the folder from the desktop and reopen iTunes to apprently solve the problem. However, when I move the iTunes Library file to the desktop and try to reopne iTunes the icon just keeps bouncing and when I right click the application does not respond.
This problem is only resolved if I restart/shut down my macbook pro which is a 15-inch Core 2 Duo with intel. It will be 5 years old in December. I currently have Lion and the latest iTunes 10.5. This problem started in late December.

If you hold down the option key when starting iTunes, it will allow you to select a library or create a new one.
You can create a new one, and then add all of your iTunes music back in by simply dragging the old iTunes music file onto iTunes.
There are more detailed instructions at http://support.apple.com/kb/HT1451#
It will show you how to re-build your iTunes database file.

Who knows how to fix the iTunes Festival app? It doesn't stream or show any videos available!

Neither my Apple TV app, nor iOS app work.. moreoever, the festival page on the iTunes store doesn't work either! I already missed a few of my fave bads and I can't watch them on demand! just a black screen appers on the iOS app, or sayd Error in the AppleTV! Please help!

Does anyone in the community have insite into this issue (same with animation compressed QT's). Is this just the way it is moving forward (a terrible thing) or is it a bug that will be fixed in the near future. Apples silince on if this is a "feature" or a "bug" is frustrating.
Thanks.
Lawrence

How I fixed the iTunes "freezing when synching" problem

My version of iTunes (the latest version) would freeze whenever I tried to synch. I ran a virus check (found 3 viruses and cleaned them), then I restored my iPod in iTunes, which erases all the music off the iPod. Then I synched the iPod and the problem is gone. Not sure if this will work for you, but it did for me. Good luck.

your welcome, all of you. But there is a sad part ot this...
I noticed that the only option that worked for me was Windows 2000 and that the others (Windows 98/ME, Windows 95, and Windows NT) did not work. This leads me to believe that with more and more updates coming, sooner or later Windows 2000 will be obsolete to the iTunes software.
I know a lot of people who prefer Windows 98 and 2000 over XP because of modibility and hacking ability. So for Windows to essentially throw 98 out the window and not care to make iTunes compatible with it is pretty stupid. I highly doubt those Win98 users want to shell out about $100 to upgrade just to use a free program.
Just another piece of evidence in my theory that Apple is fading out Windows to coax people into buying more Macs.
.....Le Sad....

How to fix the "iTunes was not properly installed if you wish to import or burn CD's you need to re install iTunes

Below is the Itunes Diagnostics that I have -
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Studio 540
iTunes 11.2.2.3
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.3
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 1.0.6.2 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00************A8
Current user is not an administrator.
The current local date and time is 2014-06-05 14:21:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {66DB7017-1E38-4374-9440-2C75FF0EE4CA}
Description:            Realtek PCIe GBE Family Controller
IP Address:             192.168.0.98
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:      No
DHCP Server:
Lease Obtained:     Thu Jan 01 11:00:00 1970
Lease Expires:       Thu Jan 01 11:00:00 1970
DNS Servers:         192.168.0.1
                                192.168.0.200
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-06-05 14:19:17.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.2.2.3 (x64) is currently running.
iTunesHelper 11.2.2.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Device is working properly.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Device is working properly.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 5 (CDMA) running firmware version 7.1.1
Serial Number:       DQ*******TWD
iPad (3rd Generation) (Wi-Fi) running firmware version 6.0
Serial Number:       DY*******J8T
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
<Personal Information Edited by Host>

Someone please help me to get this fixed

Technical question - how to fix the iTunes 10 icon abomination?

This is the worst icon to come out of Apple since OS 10.0 launched!
I am appalled!
How can I get it changed back or at least to something that doesn't look like the WINDOWS VISTA BALL!

...and this whole "Ping" thing is like amateur hour....Not really happy with the hybrid view either. Sent an email to Steve yesterday, no response. Quelle surprise.

HT5007 i need to know how to fix the itune app. when i try to open it on my iphone 5 it shuts down right away

everytime i try and open my app it closes. can anyone help

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

How to fix the "/var/spool/postfix/maildrop" error?

I keep getting the following message in my console:
com.apple.launchd[1] (org.postfix.master): Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
I searched but could not find the solution and the only one that had a solution can't be replied to anymore, and unfortunately that solution didn't work for me.
Anyone have any suggestions?
Thanks.

I found this solutions:
"Make sure Server Admin is not running.
Edit /etc/postfix/main.cf and change:
smtpdclientrestrictions = permit_mynetworks zen.spamhaus.org permit
to:
smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org permit
When done issue:
sudo postfix reload"
Here: http://discussions.apple.com/message.jspa?messageID=6361105
Problem is those instructions are over my head. Can someone explain the process better to a lay person? The thread is too old to reply.
Message was edited by: DJ Duke

How to fix the error code B200 of MP258 canon printer?

please help me how to fix the priter that has an error code B200 of MP258.

Hi guadaduque, thanks for posting! In order to allow the Community to better help with your question, we'll need some more information from you.
What exact computer operating system are you using? Once we have this information, the Community will be better able to help get you up and printing again!

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itunes

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune

If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How do I fix the itunes library.itl file is locked/

How do i fix " the itunes library.itl is locked?

Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/TS1277 - Shared folder issues with Store authorization.
gittekjaerulff I have bought a new laptop (not a Mac)
You posted in the Mac forum but say you are not using a Mac. I'll request your post be moved to the Windows forum.

How I fixed the iTunes 7.5 installation error

Similar Messages

Maybe you are looking for