How i get by with the sleep, pause issue after 1.0.2 update

ok. i'm sure you guys are aware of the ipod sleeping/pausing issue after updating your ipod to 1.0.2. my ipod will pause whenever it is in the jensen dock station and the green battery indicator shows up. whenever i use the dock or remote to unpause the song, a few seconds later, it pauses again. so instead of using the dock or remote to play, unpause, whatever, i connect the ipod to the dock and use the wheel to navigate and 'only' use the play/pause button on the ipod itself to kick off the playing of music. if i go back to the remote, the ipod pauses. if i only use the menu and play/pause button on the wheel, my songs do not pause. it sure was nice using the remote before 1.0.2. i mean, it did come with the dock for my remoting pleasure but alas, i shall wait on the next update. hope this helps someone.

I will have to try that... I took my iPod to work today and plugged it into my JBL docking station and it was skipping. I did notice it seemed to go to sleep more often when I used the remote... There's a whole other forum on this maybe you could check out too. But it's really annoying and I hope Apple comes out with a fix soon! I will definitely try to use the iPod wheel tomorrow and not the remote.

Similar Messages

  • How to get  data with the raw pattern from resultset ?

    would you tell me how to get data with the raw pattern from resultset ?
    thank you in advance!
    longgger2000

    I tried getBytes() and getObject()
    , but I can not get the right result , for example the
    data in oracle database is 01000000DFFF, when In used
    the method of getBytes() and getObject(), I get the
    result of [B@1c2e8a4, very different , please tell me
    why !
    thank you
    longgger2000
    [B is byte arrayseem that it return an bytes array for you.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Tip of the week: How to get started with the Admin Console

    Good e-discovery practices are becoming a higher priority for companies everywhere. With the proliferation of cloud services, social networks, and mobile devices used by employees, electronically stored information (ESI) lives in more places than ever before. Add to that the growing threat of data breaches, and you have a real need for industry leaders who can share their best practices.RecentlyGuidance Softwareconducted its annual e-discovery survey, and they’re holding a webinar in which leading security and e-discovery experts will weigh in on the survey’s findings. On the survey panel is Dropbox Head of Trust and Security Patrick Heim, formerly chief trust officer at Salesforce, and CISO at Kaiser Permanente and McKesson. He’ll be joined by Scott A. Carlson of law firm Seyfarth Shaw, Chris Dale of the eDisclosure Information...
    This topic first appeared in the Spiceworks Community

    awesome, thank you!

  • Is there any fix for the bluetooth connectivity issue after most recent OS update?

    Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
    (119795)

  • I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything.  Anyone out there know how to d

    I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything.  Anyone out there know how to do it?

    Hi mansons67992701,
    No purchase is required to install Flash Player.  The offer you're seeing is optional.  There should be a yellow 'Install Now' button on the bottom right of the page. Is the button not displaying?  Please post a screenshot of the page (How to post a screenshot in the forum).
    Maria

  • How do get rid of the twitter app when there's no trace of it except for update notices on app store and that too with a stranger's id ??

    How do get rid of the twitter app when there's no trace of it except for update notices on app store and that too with a stranger's id ??

    ayk74,
    so you have no idea where some of your installed software originally came from?

  • HT204088 My credit card was charge with out my approval, how can I get support with the issue?

    My credit card was charge with out my approval, how can I get support with the issue?

    If it's a purchase that appears on your purchase history (and not a temporary store holding charge which is made each time that you add or change your credit card details) and nobody else has access to your account and/or devices, then you can either try the 'report a problem' link from your purchase history to contact iTunes Support : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

    How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

    Use the same cleaner as for shoes.

  • I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
    - Dave

  • Troubles with the sleeper: how can I avoid it restarting on its own?

    When on sleeper, my MacPro early 2008 restarts on its own after a while.
    Until very recently, it worked perfectly well.

    Thanks for your help.
    I wonder if the the troubles I have with the sleeper and with the start button are not linked with an issue on the main disk. Apparently, I need to repair my main drive:
    - the number of volume files is not valid
    - the numner of volume directories is not valid.
    2013-12-15 11:02:20 +0100: Utilitaire de disque a commencé.
    2013-12-15 11:04:13 +0100: Vérification du volume « 1 Main HD »
    2013-12-15 11:04:13 +0100: Démarrage de l’outil de vérification :
    2013-12-15 11:04:15 +0100: Vérification en direct en cours.
    2013-12-15 11:05:18 +0100: Vérification du volume HFS Plus journalisé.
    2013-12-15 11:05:18 +0100: Vérification du fichier de blocs en excès.
    2013-12-15 11:05:18 +0100: Vérification du fichier de catalogue.
    2013-12-15 11:05:18 +0100: Vérification des fichiers à liens multiples.
    2013-12-15 11:05:18 +0100: Vérification de la hiérarchie du catalogue.
    2013-12-15 11:05:18 +0100: Vérification du fichier des attributs étendus.
    2013-12-15 11:05:18 +0100: Vérification bitmap du volume.
    2013-12-15 11:05:18 +0100: Vérification des informations du volume.
    2013-12-15 11:05:18 +0100: Nombre de fichiers de volume non valide
    2013-12-15 11:05:19 +0100: (normalement 617151 au lieu de 617152)
    2013-12-15 11:05:19 +0100: Nombre de répertoires de volume non valide
    2013-12-15 11:05:19 +0100: (normalement 173934 au lieu de 173933)
    2013-12-15 11:05:19 +0100: Le volume 1 Main HD s’avère corrompu et doit être réparé.
    2013-12-15 11:05:19 +0100: Erreur : Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.2013-12-15 11:05:19 +0100:
    2013-12-15 11:05:19 +0100: Utilitaire de disque a cessé de vérifier « 1 Main HD »: Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.
    2013-12-15 11:05:19 +0100:

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants.  Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

    I lost my old iphone and have a new 5s.. i need to sync to itunes.  i had to donwload manually via tools but i didnt download all four files.  now when i plug my phone into itunes it says there is an error bc i didnt download all the files.  so when i go into itunes now and check for updates it says its up to date.  the problem is with the phone support file i didnt download. 
    Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
    ***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • How to get rid of the black border around the artboard

    Hopefully my last question for tonight.
    I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
    As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
    So how-to get rid of the border? Thanks
    ***Update***
    I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

    Doesn't change the fact my spider looks like a tick:)
    Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

  • How to get rid of the old songs from iPhone that do not show up in iTunes?

    Every time I delete my entire iTunes library and sync iPhone with it, my music is still loaded with old songs but do not appear on my iTunes. And when I add new songs to my library, the new songs get mixed with old songs.
    How to get rid of the old songs?

    hey buddy....u have to delete the songs from ur iphone....i have got the same issue.....songs are not showing in itunes!!!!!

Maybe you are looking for