How I get my Logitech T650 Touchpad work's in gnome-shell?

Hi all..
Anyone know what I need to get my Logitech T650 Touchpad work's in gnome-shell?
This is my product: www.logitech.com/en-us/product/touchpad-t650
Thanks !

@KingYes There must be more than that single line (which isn't even meaningful). Can you git pull the latest usbmon-setperms script and re-run it again? Try to move to get some messages and tap once you see some messages. If you do not get something, it is probably the wrong USB bus. In that case, please post the output of lsusb -d 046d:.
The output should look like this (annotations added by me):
# move pointer
16:36:22.834 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.850 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.858 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 01 E0 FF 00 00 5E 00 00 00 00
16:36:22.866 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 01 F0 FF 00 00 4E 00 00 00 00
16:36:22.880 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.888 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 01 E0 FF 00 00 5E 00 00 00 00
16:36:22.896 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.912 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 01 00 00 00 00 3D 00 00 00 00
16:36:22.920 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.928 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.950 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
16:36:22.982 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 F0 FF 00 00 4F 00 00 00 00
# tap
16:36:24.062 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=01 00 00 00 00 00 00 3D 00 00 00 00
16:36:24.216 Recv report_id=20 unkn device=02 DEV2 type=02 MOUSE params=00 00 00 00 00 00 00 3E 00 00 00 00
@89c51 It's likely that it will be included in a future Linux kernel.

Similar Messages

How to get micro sd card to work

how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

How to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

how to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

I think I got a little ahead of myself explaining my problem, so let me clarify...
Only the one iMac is having the network file deletion problem, but it is included in the network user logon problem. So 4 out of 5 of the iMacs have had or are having logon problems with network users accounts using mobile accounts on the systems. 2 of the 4 I have wiped and started over on and the other 2 have different network accounts being used by the primary system users. The 5th iMac has not caused any problems except I forgot to mention that the USB on it seems flaky.
So we are apparently full of problems.

Does anyone know how to get an animated screen saver working

Hi I have a imac desktop not even a year old. Does anyone know how to get an animated screen saver working please. Its a gimp screen saver and is it safe to use on my mac?

Go to the website from where you got the screensaver from and read its system requirements and instructions for installation.

I cannot get my Logitech webcam to work with Lync for Mac

I cannot get my Logitech Webcam or Cinema Display facetime webcam to work with MS Lync. Lync always uses the Macbook Pro's standard webcam and does not give any options anywhere to choose between video devices. The same webcam works with GotoMeeting, Viber, Skype and Google Hangout without any problems.
Does anyone know how I could get it working with Lync for Mac too? I have the Lync for 2011 version 14.0.7.

Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to get physical path of current working file?

I WANT TO KNOW THE PHYSICAL PATH OF CURRENT WORKING FILE IN JAVA ON BOTH UNIX AND WINDOWS PLATFORM.
HOW TO GET IT?
THANK U

I am not sure this is the correct way to do it, but I tried it out a bit and found that the following will work (that is, I tested it on NT :-)):
String nameWithPackage = YourClass.class.getName();
String name = (nameWithPackage.substring(nameWithPackage.lastIndexOf(".")+1))+".class";
URL url = YourClass.class.getResource(name);
String path = url.getPath();I hope this will help...

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

How to get the FTP clients to work?

This is something that (to me at least) should be trivial but I just can't
get it to work at all.
How do you get an FTP client to work?
I've tried several GUI clients as well as the terminal FTP command and they
all seem to get stuck entering passive mode - according to the log entries
they send the command.... And then nothing or a timeout, the following is
from the terminal FTP command:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.11...
Connected to ftp.apple.com.
220 17.254.16.11 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,11,223,157).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
In my System Preferences -> Network panel in the Proxies tab, I have the
"use Passive FTP mode (PASV) checked.
I also have checked the FTP firewall option (but I think that is only if I'm
acting as an FTP server).
I am connected to the internet via a Netgear wireless router.
I also have an old Windows laptop that also uses the same wireless router
and it can FTP quite happily!!!!!
Any suggestions would be gratefully received.
Susan

ejn - thanks for your continued assistance.
I've tried turning the firewall off but this does not appear to make any difference(*). Also, I have Parallels installed and I'm sharing the internet connection with this (even though Parallels itself is not currently running). Turning this sharing off doesn't seem to change anything either.
I have noticed some entries in the ifpw.log file that coincide with some of the ftp actions. Given the following terminal session:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.10...
Connected to ftp.apple.com.
220 17.254.16.10 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,10,245,46).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
at the time the "200 PORT command successful" is displayed, the ifpw log starts showing:
Sep 5 09:11:21 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:24 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:27 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:30 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:33 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:36 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:42 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
which makes sense as the system tries to go for an active transfer.
(*) Actually, while I've been writing this, I've been playing on the terminal as well. I've found the combination of:
1) turning off the firewall
2) starting ftp
3) issuing the 'passive' command to turn off passive mode
4) issuing 'ls' etc. works
Looks like I've not been waiting long enough for the ftp client to get sick of trying the passive transfer and switching to an active one with the firewakk turned off!
Still doesn't answer the question - why does passive mode not work?
Susan

How to get the garbage collector to work?

Hi,
i have i program where i load an image scale it down and save the scaled version in an array. I do this for a whole directory of images.
After every image i set the temporary variable for the loaded image = null and call the function System.gc().
My problem is, that the garbage collector does�nt give the memory of the loaded image free and the used memory of my program grows with every loaded image.
/* Reads all images from a folder an stores them in an Array of images */
     public static BufferedImage[] readScaledImagesFromFolder(String folder,
               int maxSize) {
          File dir = new File(folder);     /* Open the Folder */
          String[] children = dir.list();          /* Get the children of the folder */
          if (children == null) {
             // Either dir does not exist or is not a directory
              System.out.println("No images in the folder!");
              return null;
         } else {
              /* Init array for images */
              BufferedImage[] images = new BufferedImage[children.length];
              int i = 0;
              int index = 0;
              BufferedImage temp;
              String filename, fileending;
             for (i=0; i<children.length; i++) {
                  // Get filename of file or directory
                 filename = children;
     /* Get the fileending of the file */
     fileending = filename.toLowerCase().substring(filename.length()-4);
     if(fileending.equals(".jpg") || fileending.equals(".bmp")
               || fileending.equals(".png") || fileending.equals(".gif"))
          /* Read the image */
          temp = util.ImageUtils.loadBufferedImage(folder+"/"+filename);
          /* Scale the image down and save it in an array */
          images[index] = Util.getScaledImage(temp,maxSize);
          index++;
     temp = null;
     System.gc();
     Mosaic.sourceImageNum = index;
     System.out.println((index+1)+" resized pictures loaded from folder: "+folder);
     return images;
How can i get the gargabe collector to work after every iteration?
I tried to let the Thread.sleep(10) after System.gc() but it does�nt help.
Thank you every much
JackNeil

Hm yes.. i now that System.gc() is only a
suggestion.
But i know what my program is doing and that it
does�nt need the temporary image anymore after i have
a scaled down version. And the temporay image will become unreachable as soon as reading the next one overwrites your temp variable. Setting the variable to null doesn't have much effect.
It would be smarter to load the new image over the
old temporary image and not to expand the heapsize to
maximum.Then look at the possibitly of loading the next image into the same bufferedimage.

How to get EDUP wireless usb adapter working under linux

i have a EDUP wifi adapter, that i would like to use with arch.
the box states that linux is supported. but i dont know how to get the drivers to work.
here is the out put of lsusb.
[mark@blackeee ~]$ lsusb
Bus 001 Device 004: ID 0ace:1215 ZyDAS WLA-54L WiFi
thanks for any pointers .

i have a EDUP wifi adapter, that i would like to use with arch.
the box states that linux is supported. but i dont know how to get the drivers to work.
here is the out put of lsusb.
[mark@blackeee ~]$ lsusb
Bus 001 Device 004: ID 0ace:1215 ZyDAS WLA-54L WiFi
thanks for any pointers .

How to get Motion Tracking Mode to work?

How do I get "Motion Tracking Mode" to work? I click the icon and nothing happens, its like greyed out.

scouterbsa
Here is my check list for you to review regarding using Motion Tracking Mode in Premiere Elements 10 on Windows 7 64 bit.
1. You need a video and with enough motion in the object in it to track it. Color contrast between the object and its background can be important to success.
I created a DV AVI 4:3 in which I have a circle moving, and I have used a butterfly Clip Art from Premiere Elements 10 to track to track the circle as it moves in the video. In this example, you see the object only at 0 time.
2. Select/highlight the clip on the Timeline. And then click on the Motion Tracking Mode icon above the Timeline.
You should next see the following Motion Tracking dialog asking for a Yes or No to the question "Run
Auto-Analyzer to track moving objects?" Click No.
3. At this point, you will see a bounding box on screen. That bounding box should be placed using the mouse cursor on the object
that is going to be tracked, in this case, the circle. Resize and position the bounding box accordingly.
4. Once you have the bounding box on the object and resized, click on Track Object at the top right of the monitor.
The screenshot below shows only the before clicking Track Object at the top right of the monitor.
When that action is finished the bound box edges will be an orange yellow color. I have skipped over a screenshot
for the latter.
5. With the orangel yellow bounding box in place, next drag the Clip Art (in this case, Butterfly 02) from the Clip Art display area toward and into the orange yellow bounding box frame. The orange yellow bounding box frame will turn blue. That is the first sign of success.
Hit the Enter key of the computer main keyboard and watch the results. The Butterfly should track the circle's
movement in the clip. The duration of the clip and the continuity of the object's motion in the clip can be other factors.
If you do not succeed, try again with a different video clip (one with more movement and color contrast.
The above is a best case scenario. If it is speech bubbles that you are having problems with as well, we will deal with them next.
Right now it seems like you are having problems getting started rather than having a problem with a specific Clip Art that you are
using to track the object in your video.
We will be watching for your results.
ATR

How to get a USB-Serial connector working

I have a laptop with only USB ports, I'm trying to get a USB Serial connector working. I can't find a good guide on how to do it, I can figure out that i need to enable some sort of kernel options, but I'm not sure about how to go about doing it. Can someone hold my hand and tell me what I need to do to get it working?
Thanks

It depends on what kind of USB->Serial you have. Some common ones are:
cp2101
ftdi_sio
pl2303
And those kernel modules are all included with Arch (along with lots more).
I'd start by just plugging it in and running dmesg to see if your kernel/udev detected it. If you see something about ttyUSB0 then you got it. Just open that device as you would open a normal serial port.
If it doesn't report anything, run lsusb and see what kind of chip it has.
If it does report it, I would use minicom to interact with it.
(Run "minicom -s" as root and set the device to /dev/ttyUSB0, baud to 9600 (or whatever) 8N1. Turn off Hardware and Software flow control. Finally go into Modem and Dialing and delete the init line (unless you are actually dialing)).

How to get my old iWeb files working in iweb'08 (version 2.0.4)

Hi folks!
OK, so I have new iMac with iWeb'08.
I then copied all website data to the sites folder on the new machine.
Now I do not see my old websites in iWeb anymore. I start investigating and now I learnt that I need to copy a domain.sites2 file located in Home Folder/Library/Application Support/iWeb to the same location on the new iMac.
But that file is lost now because the old iMac went to my son who re-installed MacOSX.
Does anyone know how to get my old files working again????
Thanks!

See paragraph 2.3 of this iWeb FAQ site for tips on using files from the existing published site in rebuilding the site: http://iwebfaq.org/site/iWebBackupretrieve.html
OT

How to get a simple form to work

I am just trying to make a simple contact us form and can not
get it to work. I am uploading trial version of 8 but currently
using dreamweaver 4.
I can do simple stuff, and made the form I need, but have no
idea how to get it submit to my e-mail. Can anyone help me? I host
with Godaddy and sked their tech support, but they have no idea how
to help me because dreamweaver isn't their product. Thank
you!

Sabrina Robertson wrote:
> I am just trying to make a simple contact us form and
can not get it to work.
> I am uploading trial version of 8 but currently using
dreamweaver 4.
> I can do simple stuff, and made the form I need, but
have no idea how to get
> it submit to my e-mail. Can anyone help me? I host with
Godaddy and sked
> their tech support, but they have no idea how to help me
because dreamweaver
> isn't their product. Thank you!
>
To process your form there is really only 2 reliable ways to
do this.
1) Use some server language, like php, asp, cold-fusion.
However since
you don't know any of those, neither do I for that matter,
you need to
concentrate on option 2.
2) You need a ready-made script to process the data for you.
One of the
most popular ones is 'formmail' You can read about it, how to
set it up
and download the script at the below address.
http://www.scriptarchive.com/formmail.html
The basic information is you will probably have a folder on
your server
space called cgi-bin.
The formmail script needs to be uploaded to this folder but
you will
need to configure the script first. The above address tells
you how to
do that.
Have a look on your server and see if you have a cgi-bin
installed. If
you have have a look inside it. A lot of hosts already are
using
'formmail' as a way for you to get results from your form.
You then point your form at the script in the cgi-bin. So
your opening
form tag may look something like this:
<form method="post" action="
http://www.your_
domain_name.com/cgi-bin/formmail.pl"
name="Request_Details">
The form data is sent to the script in the cgi-bin, processed
and
returned to you at your email address.

How to get the wireless router to work when i change to new modem and internet connection

I already set up my wireless router in my macbook but then moved to a new house and basically have a new internet connection. My internet connection is fine when i connect the ethernet cable form the modem to my macbook. But when i plugged in the wireless router, my computer sees it but will not connect to the internet. I lost my installation CD and i tried to re-install using the dowloaded installation but it goes into error saying i can't re-install if i don't change back to default.. anyway, maybe the solution is simple but it eludes me so please help!
In summary:
1. same macbook
2. same wireless router
3. same internet provider but new connection and modem (since i moved to a different house)
how do i get my wireless router to work? thanks!!!

Who is your Internet Service Provider(ISP)?
If you have a cable connection then follow this link and if you have a DSL connection then follow this link to configure your router.

How I get my Logitech T650 Touchpad work's in gnome-shell?

Similar Messages

Maybe you are looking for