How I got my Jukebox 3 to work in Vi

Yes.
Here is how I did it.
I downloaded the latest JB3 driver from Creative.
I plugged in the player (using USB). Before unpacking the driver, I right clicked on the install pack and chose "compatibility", then checked "install in compatibility mode for Windows XP Service Pack 2", then exited the popup window and double clicked the icon to start the installation. The driver unpacks to the 65% point, then stalls. I forced Vista to close through the Task Manager, then unplugged the JB3 and replugged it in. Vista then recognized the device and installed the driver.
It doesn't show in Creative MediaSource (as a matter of fact, this bolloxed MediaSource), but it works in Creative Media Explorer, Yahoo! Jukebox, and Rhapsody Music Organizer. I can transfer, organize, and delete tracks.
Tom

Hey, thanks! I did slightly different from you, didn't need the plugging/unplugging. But got the main ideas from you, that is, to use XP Compatibility Mode for the XP Driver and XP Nomad Explorer.
Here are the explicit steps to emphasize that you get the downloads from checking "XP" on the Creative site, exactly where to select compatibility mode, and that you don't plug in the JB3 until told.
1. Downloaded and save the latest JB3 driver from Creative Labs' site using *XP* download, not Vista download.
2. Right click on driver .exe, Properties --> Compatibility --> "Run this program in compatibility mode for [XP SP2]"
3. Run the driver .exe before connecting the Jukebox 3. It will run to 00%.
4. Connect the JB3 when told to by the driver install program.
- voila -
For Nomad Explorer, similar steps as - 3. At first I couldn't copy any files from or to the JB3, getting access denied messages. The fix was simply to exit everything and unplug, and start again. For some reason it now works.
Thanks much!
(One other addition for people who might only be looking at this post: this only works using the USB port.)
Message Edited by jj2me on 05-07-2008 03:25 PM

Similar Messages

  • How I got my rear speakers to work (logitech z 5500 5.1)

    Instead of connecting the black cable into the black slot of my speaker system, I put it in the orange slot and the orange plug in the black slot. I did the same to my sound card, black slot in line 3(center/sub) instead of line 2(rear left, rear right) and orange in line 2. I was amazed that this got it to work. I was on the verge on posting some long ass post saying how i tried everything, but i decided to try something stupid and switch a few plugs that I wasnt supposed to switch. I basically got it working by accident. Im pretty happy

    When the Toslink to mini-jack digital cable arrives you would set up the 5.1 audio to the system through Audio MIDI Setup; Apps>Utilities>Audio MIDI Setup.
    From the Audio MIDI Setup Help menu;
    Configuring speakers for multichannel output
    If you have a multichannel audio output system, you can select the speaker used to play each channel.
    You must be using an audio output system that provides more than two channels of audio output.
    Before you start, be sure you have connected the audio devices to your computer, turned them on, if necessary, and installed any software required by the manufacturer.
    1. Open Audio MIDI Setup and click Audio Devices.
    2. Choose the audio output device from the Properties For pop-up menu and click Configure Speakers.
    3. If you are using an interleaved device with more than one audio stream, you can choose the audio streams you want to use with your speaker configuration.
    4. If the stream you select provides enough channels for the speakers you are configuring, you cannot select additional streams.
    5. Choose the type of output you want to set up from the pop-up menu.
    6. For each speaker in the configuration, choose a channel from the pop-up menu below the speaker.
    7. To test the configuration and speaker, click the speaker.
    8. When you're ready, click OK.
    If the speaker doesn't make any sound, make sure it is connected to your audio device correctly and the audio output is not muted.

  • How I got my iPod to FINALLY work

    When my husband bought my iPod for me, he didn't purchase Applecare. But since I reported problems with it while it was still under warranty, I could still purchase Applecare. I really recommend doing this if you can. They (usually) service it for free.
    To make a long story short, my computer (powermac G5) wasn't recognizing my ipod, so therefore I couldn't download anything on it...very frustrating.
    So, I returned it to Applecare, and they sent me a new one, still didn't work. And we did this again, it still didn't work. UNTIL I was told to plug it into the back of the computer...it works.
    For some reason, my iPod only works in the USB port in the back of my hard drive tower.
    Hopefully, this will work for some of you...

    "For some reason, my iPod only works in the USB port in the back of my hard drive tower"
    Although I'm not familiar with your particular computer, some USB ports are not connected directly to the computers motherboard, and those that are tend to work better with the iPod because of this.
    This may be the reason why your iPod was instantly recognized when you changed ports.

  • How I' got a Tascam US144 mkI working again on a iMac Intel s.leopard 10.6?

    what i did to get it, tascam us144mkI working again on 10.6 and a iMac late 2009, 21,5" 3.0Ghz ? in settings/tools (hulpprogrammas in Dutch), with the cmd btn l.click audio/midi config. click more info, mark 32bit. remove the latest driver 2.0 for s.leopard . i installed the latest firmware from tascam's site btw (maybe that did the trick)... installed the old driver 1.3 from tascam again and it works with all programs like iTunes, Garageband, Logic, the internet... good luck

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • "how I got my AOL DESK TOP TO WORK AGAIN AFTER MAVERICKS"

    This is how I got my AOL DESK TOP TO WORK AGAIN clic on the link at the end when you get there to the right side under resources! you will see download ( aol desk top for Mac ) it will be 1.7.784 clic and download then everything should be back to normal.Bob    AOL Desktop for Mac 1.7 - Mac@AOL Blog - AOL.com

    Have you tried a PRAM reset?
    http://support.apple.com/kb/ht1379
    If you look in the audio output port, is there a red light showing.  If so, the internal switch is stuck..  Insert the headphones a few times, jiggle a toothpick inside or shot some compressed air to trip the switch.  If no success, have the Apple store genius bar technician do it.
    Ciao.

  • How do you get the jukester jukebox app to work vertically so I can use in a tabletop jukebox machine

    How do I get the jukester jukebox app to work vertically instead of horizontally-so I can use it in a jukebox?

    If other apps can rotate and use vertically then the Jukebox developer did not include this functionality.
    Write to them:
    http://www.jukesterjukebox.com

  • HT2471 i want to add  verbatum external hard drive.  I think  connected it and the grren light came on, something fell and it got disconnected.  I restarted  but how do you know if it's working?  the green light is on and sometimes flashes, the instructio

    I have an external hard drive that I used with my mini mac.  I want to use it on my MacBookPro.  I plugged it in found it on my computer, it flashes seemed okay until it tipped over and came unplugged to  the computer.  I set it back up turned it on and the grren light sometimes flashes.  I read an article that said I needed to format the drive, I followed instructions and did that.  I will download tomorrow my pictures.
    Question
    How do I know if this is working
    does it record everything on your computer?
    How do I see what is there?  on the drive
    confused please direct me to help
    thanks
    kathy

    it may be very basic but I still don't get it,   the instructions are basic too so I'm sure I'm missing some thing here.i don't know how to copy  data and copy it back
    I don't see any indicaters  to do so.  I'll try again, , it's on a laptop and I don't want it connected all the time, just to secure some images.
    how  do i copyu...
    maybe I'll try a 'zip' drive instead?? But I don't understand them either, hard to be a dunce.
    and by the way, my computer has been freezing up on me lately had to turn it off and on, what have i done to it!!
    I just connected it again and it shows as a number22but nothing happens when I click on it...shouldn't something happen here? It seems to be empty as well as it should since I followed instructions on formatting.  so what now? 
    This is trying your patience I'm sure,you may just forget about helping me I just don't have a clue
    but  if you can help, I am listening.

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

    My Computer:  HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates.  Downloaded and installed the following:  Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization.  I have done EVERYTHING Microsoft has advised.
    How do I get XP Mode to work?

    Frank, thanks for the help.  That Microsoft article is the one I read yesterday morning.  I again just now went into the BIOS as follows:  Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled.  So I saved changes and exited.  My computer is running Windows 7 Professional 64-bit.
    This is my system information: 
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name    HPPHOENIX
    System Manufacturer    Hewlett-Packard
    System Model    h9-1100z
    System Type    x64-based PC
    Processor    AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
    BIOS Version/Date    AMI Ang_716, 4/5/2012
    SMBIOS Version    2.7
    Windows Directory    C:\Windows
    System Directory    C:\Windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United States
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    HPPHOENIX\Debbie
    Time Zone    Eastern Daylight Time
    Installed Physical Memory (RAM)    12.0 GB
    Total Physical Memory    11.8 GB
    Available Physical Memory    10.2 GB
    Total Virtual Memory    23.6 GB
    Available Virtual Memory    21.7 GB
    Page File Space    11.8 GB
    Page File    C:\pagefile.sys
    I downloaded and installed the Windows XP Mode.  The
    I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
    I applied the "fix" for AMD motherboards.
    I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
    "Windows XP Mode-Windows Virtual PC
    Could not complete Setup.  Please try again."
    The has happened over 7 times.  Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again.  Still the same message.  Any help or advice is certainly needed and appreciated.  Debbie

  • How I got the .4181 OS finally installed and running stable

    Hi folks,
    after a very long night shift, I am "proud" to announce that my Z10 is now running stable in 4181 without any missing functionalities. (even phone calls seem to work properly :-) )
    Interested in how I got there, then just read on:
    IMPORTANT:
    If not already done, BACKUP ALL DATA on Your Z10 device, You´ll surely need this Backup! :-)
    After the everlasting security wipe, which I tried to interrupt several times, by pulling the battery (and the SIM) out, it finally stopped and showed me the connect to PC icon on the screen of the Z10. 
    So I connected my Z10 and restored the factory FW using the BlackBerry Link Software, WITHOUT having the SIM inserted.
    After the first initial setup, I looked for SW Updates, but (and of course) none was presented, due to the missing SIM, so I continued to do some basic setups and "testing" the bare system. All went fine.
    After that, I reinserted my SIM, powered the Z10 up and tried to copy the previous backup back onto the Z10, which was (another of course and obviously) not possible, due to mismatching SW-Releases.
    So with the SIM inserted, connected to a WiFi and my mobile carrier, I once again checked for updates and voila, .4181 was available, this time having 359MB.
    (--> BlackBerry just seems to provide the "basic emergency" OS, all further updates and releases are distributed through Your individual mobile carrier)
    I initiated that download, went to bed to get at least a few hours of sleep and when I woke up, I did, what the display on the Z10 wanted: Restart the device.
    The then following boot sequence was fast and smooth, reaching the 100% in just under two minutes, no freeze, no hangers, no being stuck.
    There I had my bare device on which I could copy my previously carried out backup again in no time!
    Of course I had to reenter the some passwords and the SMS were gone, but looking at the last days, I think this is the biggest progress of it all ;-))
    THIS is how I did it. Of course I know that I defied against some of the most important rules and therefore I can and will not give You any guarantees that this "solution" will work  unlimited, but considering my high level of frustration and how angry I was, these measures seemed legit to me and I can tell, they just worked fine! ;-)
    the steps in summary:
    - Backup all Data
    - do a Security Swipe
    - extract SIM
    - reset to factory presets using BlackBerry Link
    - re insert SIM
    - look for provider updates
    - install
    - copy previous backup to device
    - don´t worry
    - be happy
    PS: Don´t panic, if it takes longer or if nothing seems to happen. What I burnt mostly the last days, where minutes, hours and days
    Thumbs up and fingers crossed. I hope this might help You aswell!
    If it does, feel free to like this "solution" :-)
    Paddy

    Sorry for not being detailed enough.
    I have Vista: Ultimate 32 bit edition. Everything works the stereo the 5. surround sound but the main things I did notice is that alot of the options like the crystalizer and various options wouldn't save. They would definately work just when I went into creative console to adjust some more they all went back to the default settings even though they worked and were changed earlier.
    Whilst playing Call of Duty 2 it wouldn't use the EAX, I haven't tried other games . I would recommend staying with XP as of right now if you have uninstalled Vista and wait for proper drivers , there is no guarantee the way I installed or explained how to fix will work for you. Just as others before have gotten things to work with different steps to install they did not work for you, so mine not work for you. If you still have Vista installed then why not give my simple step a shot in my first post.

  • How I got my MicroPhoto to det

    After hours of trying different things I finally got it to detect my MicroPhoto. I figure I might as well post how I got it to work.
    . Uninstall everything
    2. Reinstall + update to 3.30.2 ( Can be found at Creative support )
    3. Reboot
    4. Run windows update ( even though I was fully updated after CMS was installed it found some more)
    5. Reboot
    6. Changed my USB settings* ( http://tinylinks.net/4935 ) Cant put long links in it seems. This tinylink should take you to the right site. If not please read the info after *.
    7. Reboot
    Im not sure if you need to do all these steps but its how I got mine to work.
    Good luck
    * For some reason I can put long links. So if the tiny link doesnt work. Go to support>knowledge>mp3 and use " regedit" for teh key word and look for "MP3 player not detected in Windows Media Player 0 or Creative Media Explorer" And follow the dir there.

    After hours of trying different things I finally got it to detect my MicroPhoto. I figure I might as well post how I got it to work.
    . Uninstall everything
    2. Reinstall + update to 3.30.2 ( Can be found at Creative support )
    3. Reboot
    4. Run windows update ( even though I was fully updated after CMS was installed it found some more)
    5. Reboot
    6. Changed my USB settings* ( http://tinylinks.net/4935 ) Cant put long links in it seems. This tinylink should take you to the right site. If not please read the info after *.
    7. Reboot
    Im not sure if you need to do all these steps but its how I got mine to work.
    Good luck
    * For some reason I can put long links. So if the tiny link doesnt work. Go to support>knowledge>mp3 and use " regedit" for teh key word and look for "MP3 player not detected in Windows Media Player 0 or Creative Media Explorer" And follow the dir there.

  • TS3989 hi one guy stolen my iphone, and now i need my pictures which i have in my icloud i open my Apple id in icloud but i downlode just 20 pic how i got my all picturs in my pc?

    hi one guy stolen my iphone, and now i need my pictures which i have in my icloud i open my Apple id in icloud but i downlode just 20 pic how i got my all picturs in my pc?

    Update:  I reset my phone again and this time I restored it from my last iCloud backup.  That "sort of" worked.  (The missing info was on my phone temporarily, but it's still missing from iCloud.com and as the phone syncs with the cloud the missing contacts are disappearing.) 
    This is good news, but I'm losing progress.  How can I restore my iCloud settings to that last backup?

  • How can I get my speaker to work again?

    How can I get my speaker to work again? I've tried turning my phone off and on, hard reset, removing SIM, cleaning out dust, using the hair dryer, network reset, cleaning headphone port, made sure the phone was not on vibrate,and made sure "Change with buttons" was on. There was no liquid/moisture damage.  I was watching a video on youtube and all of a sudden my speaker went out. If I tap on the speaker it goes in and out but does not stay on/loud.

    Do you get sound in any apps e.g. in Music and Videos but not notifications or sound in other apps ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If you don't get sound in any apps then have you could try a soft-reset to see if you get sound after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How do I get my audio to work again on my iPad?

    How do I get my audio to work again when I play video links on my iPad 2?  Think the problem might have started when I did the update to IOS 7.1.  I click on a video link when I'm in an app like Facebook.  The video plays, but no audio.  I used to be able to open the link in Safari and the be able to hear the audio.  But now that doesn't work either.  Apple support helped with a similar problem in10/3013.  They made me back up my iPad to ITunes through my laptop and think they wiped my iPad and re-loaded the software.  Is there any other fix?

    I just saw an answer that "Demo" posted 9/30/2012.  Said to re-boot the iPad system by holding Down to the sleep and home buttons at the same time until the apple logo screen popped up.  It worked.  I I've got audio again on my video links!

  • I find dotted circles in my text.  I don't know how they got there or what they're for.

    I find dotted circles in my text.  I don't know how they got there or what they're for.  These dotted "o" characters print out, too.

    Thanks for taking the time to suggest the screen shot.  Actually, I neglected to say that I was working in a Thai font and, after posting my question, it dawned on me that I should check the keyboard template again.  Well, in Thai, vowel and accent symbols show on the template with the dotted zeroes below as place setters, They don't show IF one doesn't make a typing error, which is what I did.  Sorry for the false alarm, and thanks, again.

Maybe you are looking for