How I got my shuffle back

I had the issue of Windows not recognizing my shuffle - All I saw was the alternating flash between green & amber.
Shuffle firmware 1.1: iTunes version 5.0.1
Steps:
Disabled SpyBot's TeaTimer
Removed iTunes & all updaters
Deleted C:\Program Files\iPod directory
Restarted computer
Installed iTunes 6
Installed current iPod updater
Restarted computer
Inserted shuffle to USB
Windows recognized USB device, but could not find a driver
Turned on shuffle & inserted to USB
Restarted computer
Windows found & installed drivers - prompted for restart
Removed shuffle & restarted computer
Inserted shuffle - updater prompted that an update was needed
No idea what the magic sequence of event is, but it's worth a try.

The mystery continues...
I updated to iTunes 6 and the latest version of the Shuffle software, disconnected everything else plugged into a USB port and rebooted my PC. The shuffle was recognised, I restored the software and for a day I was able to use my iPod normally. (Even having reconnected all my peripherals).
So far so good, the following day, I plugged my shuffle back in, (out of idle curiosity) and once again it was not recognised.
Retried everything I did yesterday, with no result. Checked it by plugging into my laptop - no result either.
This is truly bizzare. I am able to charge my shuffle, just not change the music.
For a laugh I tried phoning Apple. Helpful guy on the end of the phone. Clearly Apple have no knowledge / solution for this. This problem wasn't listed on any of his technical guides. I directed him to this forum, to which his comment was "oh yes a lot of people are having this problem aren't they"
I left him with 2 questions:
Q1. Would anyone from Apple ever get back to me to tell me that this problem was getting fixed? A - No, we don't do that.
Q2. What should I tell my music loving 70 year old, PC literate father, who wants my advice on whether to buy an iPod or an MP3 player? A - MP3 player
I'm only glad I bought a shuffle and not a full blown iPOD!

Similar Messages

  • SoundTrak Crashed!! How I got my data back.

    If you get the beachball during a record, by what could be the screen saver kicking in or the disk drive going to sleep (all of which should be disabled to start with), then you might get a file which shows size and a good time of creation, but it won't play or show a waveform. In fact even Audacity won't touch it.  Here's how to recover the data. Hopefully you know your settings you were using, aka 48khz, 44.1 etc.  For the sake of this post, I used 24bit 44.1khz AIFF sample rescue information.  Bear with me.
    First locate your bad file in the soundtrak pro recordings folder. Duplicate it. Note its size. Take the copy and get it to the desktop. Do not muck with the original.
    Download the 0xED (thats the name) hex editing app.  You can also have a dupe file of a working file from an earlier session. Your going to want to copy it as well and put it on your desktop. You'll need the header info from it.
    Open your known good file wih 0xED. Highlight and copy from the beginning of that file address 0000000 thru 0000FF7 with a contrl C on the keyboard.
    Open your bad file copy. They can both be opened at the same time.  Highlight those same addresses and contrl V that data into your bad file.  Pay close attention thats all you changed. Nothing should have shifted anywhere else. If you screwed up, cntrl Z out of that and try it again until it looks like a clean paste. Yes the data is going to be different in your paste operation as thats why your file is hosed to begin with. Hopefully you just now patched your file.  SAVE the potential repaired file using the save icon in 0xED. Open our repaired file
    with Audacity, or SoundTrak Pro. You should have a workable file now.  If not, go back and try again as perhaps you messed something up or didnt save the repair properly.  Its crucial you use data from a good file of the same settings to fix the bad one. If your not sure of the settings you used, try a couple possibilities. Most people use the same settings with only a few variations so your choices should be few hopefully. NOTE: To test your file, close out all instances of the bad file in Sountrak Pro or your new file won't chck out if it is indeed fixed. DO a fresh load of your new file into a freshly started Sountrak Pro or Audacity.
    What else have I used? I used SoundHack a few times. Its a bit strange and clunky. The results are hard to nail down. I ended up with a file that played like MickeyMouse but I was able to use Audacity to cut the speed down by 50% and save the audio.
    The problems I encountered to get me to this point were as described in the beginning of this write up. I had the beachball. One time Sountrak just quit without warning. Again, the data was there but just wasnt closed out properly.
    I hope this saves someone from a disaster. It saved me. I never gave up.
    cheers
    Johnny
    P.S.  Here's the data for an AIFF 44.1k 24 bit good file if it can be of use. You'd want to place it right over your bad file in 0xED. No guarantees. Make sure your muckng with a copy and NOT your original file...... (yes thats 4C twice, thats not a misprint)
    464F524D0A90582741494646434F4D4D000000120001000000000018400EAC44000000000000464C 4C5200000FC20000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0
    53534E440B3E3D63
    Message was edited by: johnnyU  by all means drop me a line if this helps anyone. I'd love to know.

    if you did not do a back up of your phone and memory card there is no way to get back the information. you can't roll back anything the memory or firmware once done is done for good. sorry i know this is not good news
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • How I got my WIFI back after 10.5.8 update

    Hi, I too lost my WIFI connection after updating to 10.5.8.
    After trying a lot of things (resetting PRAM, SMC...) I managed to get my connection back doing the steps below:
    1) Delete preferences in /Library/Preferences (com.apple.network.identification.plist, com.apple.airport.preferences.plist & NetworkInterfaces.plist)
    2) Delete preference com.apple.networkConnect in ~/Library/Preferences
    3) Restart computer
    Note: after restart you will lose all of your network configurations
    Important: if your router has its SSID hidden, make it visible (mine was hidden and it didn't work)
    4) Look for available networks. Luckly, you'll find your router's SSID. Connect, enter password, etc.
    5) After checking everything's ok, you can revert your SSID to hidden (I did and it's still working)
    Repeat step 4 for every WIFI you want to connect.
    Hope this helps you people!

    Had issues with my WiFi router too, after upgrading my MacBook Pro 13" to 10.5.8. Not sure we're talking about the same issues, but my MacBook connected to my WiFi network, had also a IP address, but couldn't connect to any host, nor on the local network neither outside.
    After reading your post I tried to remove the network completely from the list of known networks and to set it up from scratch. Seems it works now...
    Thanks,
    Thomas

  • How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

    How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

    The following assumes you've been backing up to icloud all along.
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
    Let us know if this method does not work.

  • How i got my all contacts back to my iphone

    plz help me out how i got back to all my contacts back to my iphone 4s

    Where are they?  In the iCloud?  Have you got Settings > iCloud > Contacts set to "On"?

  • HT1382 i got an iPad and all my app's, music,  and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud?

    i got an iPad and all my app's, music,  and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud? i have an 2nd generetion ipad and an iphone 5, thanks for you answers!

    (I think the daughter got he better end of the deal!)   I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

  • Recently got a new computer and downloaded iTunes.  All of my music has downloaded from the cloud witht the exception of one song.  I have tried transferring from my phone, but it won't work.  How do I get it back without having to download again?

    Recently got a new computer and downloaded iTunes.  All of my music has downloaded from the cloud witht the exception of one song.  I have tried transferring from my phone, but it won't work.  How do I get it back without having to download again?
    Thanks.

    If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    If you do have access... See Here...
    iTunes: How to move your music to a new computer
    Or...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    An Added Bonus is that you will have a Backup of iTunes.

  • My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?

    My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?

    ",the owner sold the ipod without clearing the songs and since the songs were not puchased from the itunes store then i believe i now own the songs"
    Not true at all.
    It does not matter where the songs came from, they are not yours and the previous owner does not own the right to distribute them to others.
    The law is the same with downloads and cds and any other medium.

  • It keeps changing the browser window, some programs in one window, others in another. How do I get everything back on the same window? I want this disabled but not sure how to do it, or how I even got it started.

    I'm not even sure what to call this or how it got started on my computer. There is one finder window for firefox, and another for other programs etc. I want them all back in the same finder window, please! What feature is this which got things split up, and how do I disable it?
    I am using an iMac with OS 10.6.3
    Thank you.
    [email protected]

    The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
    You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
    See Grouping tracks into albums for tips on getting iTunes organized.
    tt2

  • I just got my iphone 4s today and came home and plugged it into my itunes and restored it to my account but something is wrong it seems to have gone to the setting that I had on my iphone 4. How do I get it back to how I had it?

    I just got an iphone 4s and went to itunes to get all the stuff that I had on my last phone onto my new phone. I think that I have put all my setting for my old phone onto my new phone. My old phone being a iphone 4. Is there anyway I can get my phone back to how I got it earlier today?

    No, no one here can help you, & neither can/will Apple. Only Orange can authorize the unlocking of your phone, & typical of most carriers, they will only do so for customers using the phone on their network.
    Either establish service with Orange, then request the phone be unlocked, or sell it to someone that can use it on their network.

  • Just got my computer back, reset my itunes and added new music. how can i sync my ipod with the computer as I do not want to erase what I have on my ipod

    Just got my computer back. How can I reset my itunes so it matches my IPod settings? I have my favorites and files on my IPod that I want to keep and when I try to sync it gives me the option to erase and sync with computer. How can I sync without loosing any music or files at all?

    - Transfer iTunes purchases to the computer:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Make a backup of the iPod by connecting the iPod to the computer.  Right click on the iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from backup

  • On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • IPhone 6: i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

    i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

    i googled for answer to resolve the zoom problem.  all the anwers just told you to read links but didn't tell how to fix the screem back to normal then it can be able to go to Setting to fix the zoom funciton.  HOWEVER, I accidentally found the solution myself by using a fingers or more
    to draw circles clockwise on the screen....it will reset it normally.  I spent hours trying to go diagonally, compressively still didn't work.

  • I have been purchasing songs on itunes for a year. I just got a new computer and I synched my iphone to it. I had over 100 songs, now I have only 10. Where did my music go and how can I get it back?

    I have been purchasing songs from itunes for the past year. I have over 100 songs. I recently got a new computer and I synched the iphone to it. I can't find 90% of my music. Where is it and how can I get it back? I checked itunes under purchased and it only shows 13 songs. Please help.

    You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
    You always need to have a backup, an iPhone is not a storage device.
    When you get a new computer you need to transfer your library before syncing
    If you don't have a backup you may be out of luck
    The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
    http://support.apple.com/kb/ht2519

  • How do I get photos back for contacts that got lost when contacts transferred to new iPhone 4S?

    I went in to the Apple store ot get help betting my data & all transferred from my old phone or Outlook to my new phone.  They used a device that Verizon uses which apparently is the same type used to get contacts from one cell phone to the next--not a smart phone apparently.
    I've got dup contacts now--maybe because the way it was synced with my MacBookPro after converting the contacts. I already had most of my contacts converted over.  OK, I can compare & delete dups when I have time.
    But I also noticed later that the photos that i had for a # of my contacts all seem to be missing.  Is there a way to get them back?
    I thought of doing what I did with the calendars which was to delete the ones from the Mac & iPhone & then sync the iPhone to Outlook in Windows inBootcamp on my MacBookPro.
    But then I'm afraid I would either have more dup contacts or if I deleted them 1st, I would have to somehow restore a group of contacts that I only used for email & so except for a couple of them or so in the group, they were not in Outlook or my WinMob phone. I suppose that there is a way that I could somehow retrieve just that group from my Time Machine backup, but I'm not sure how to do that.
    Also in the transfer, none of the photos got transferred. They weren't mostly super important, but I am realizing now that I would like to have them.  Maybe I could just connect the old phone to Bootcamp & copy the photos from the phone to the C drive & then drag them over to the mac side & then learn how to get photos into iPhone contacts.
    Any suggestions on best ways to deal with this?

    Yes, I think that I should be able to easily get them from Bootcamp (which I have also set up as a virtual machine in Parallels 5) to the Mac side. When I moved from Dell I just brought just about all my stuff from my Dell--I think by copying them to my external back up drive & then connecting that to my Mac & copying it to Windows 7 & then dragging it over to the Mac side. I think that is how I did it.
    Back then I couldn't figure out any way to sync my Windows mobile phone with my Mac (althogh an iPhone can sync with Windows & Outlook--& I probaby should have used that to get all my pda data transferred. That was how I got my pda data into Outlook 2007 in bootcamp--by syncing with my phone.
    I suppose probably Apple forums would be a better place to ask this. I'm over there now asking about Apple ID (beware to set yours up right. different apple products have differnt requirements. My ID used to be this user name. iCloud requires an email address so the Apple guy helping me made that change. But then iTunes registration tells me my password is invalid--even though it is valid to log into One to One & btw, I highly reccomend getting a One to One contract for all the wonderful training they offer for only $99/yr.  I see the rules, they have the typical current rules many do, at least 8 characters & at least 1 upper case & 1 lower case & 1 numeral. My current one missed on 1 of those points & I don't know where to change it & iTunes just rejects it--doesn't take me to where i can change it--unless maybe I can say forgot password or something, but I haven't.
    OK; I guess I should try that.  Thanks for your help!
    gerio wrote:
    Wooo.....
    I think the gist of your solution is in your last paragraph. I just got my first Mac, a MacBook Pro (a 17", quite a machine). If you move your pics over in Boot Camp, can you access them from the Mac side? If so, maybe you could set the contacts' photos in the Mac's contacts, then sync them to the phone with iCloud, maybe?
    I know it can't be that easy, but it may be a place to start...
    Geri O

Maybe you are looking for

  • How to get elapsed time of the query in form 6i

    hi I used to use " set timing on " in sql to get the elapsed time set timing on elapsed time :XX:XX:XX , but i dont know how to get it in fom its really imporant to measure the time elapsed for me cuz i am student an need to get the time thanx alot

  • IMovie 09 - synching new sound to video clip

    Hi all iMovie users. I am trying to synch my improved sound track to video. I drag the new sound track to the approx right place in the iMovie clips having muted the clip but if I drag the green sound bar it is too fierce; if I use the arrow keys to

  • Delta load - LIS extractor to several target - test load to single target

    Hi I want have a daily delta load from a LIS extractor to 3 targets (ODS's). I would like to make a test delta load to one of the 3 targets (because it has been reconstructed). Will it cause any problems if I make a delta load from the LIS extractor

  • File Events Triggering Erroneously

    I have been using file events for a few years.  The creation of a file from an application triggers a report to run (file event), then I use schedule events to trigger addtional reports for the same application.  The file events are getting triggered

  • BAM Installation Error - ValidateDB.exe

    Hello, While installing BAM in Windows Server 2003, the first part of the install goes fine. Upon entering database connection and user information, we get the following error (the title for the message box is "ValidateDB.exe - Common Language Runtim