How I got the .4181 OS finally installed and running stable
Hi folks,
after a very long night shift, I am "proud" to announce that my Z10 is now running stable in 4181 without any missing functionalities. (even phone calls seem to work properly :-) )
Interested in how I got there, then just read on:
IMPORTANT:
If not already done, BACKUP ALL DATA on Your Z10 device, You´ll surely need this Backup! :-)
After the everlasting security wipe, which I tried to interrupt several times, by pulling the battery (and the SIM) out, it finally stopped and showed me the connect to PC icon on the screen of the Z10.
So I connected my Z10 and restored the factory FW using the BlackBerry Link Software, WITHOUT having the SIM inserted.
After the first initial setup, I looked for SW Updates, but (and of course) none was presented, due to the missing SIM, so I continued to do some basic setups and "testing" the bare system. All went fine.
After that, I reinserted my SIM, powered the Z10 up and tried to copy the previous backup back onto the Z10, which was (another of course and obviously) not possible, due to mismatching SW-Releases.
So with the SIM inserted, connected to a WiFi and my mobile carrier, I once again checked for updates and voila, .4181 was available, this time having 359MB.
(--> BlackBerry just seems to provide the "basic emergency" OS, all further updates and releases are distributed through Your individual mobile carrier)
I initiated that download, went to bed to get at least a few hours of sleep and when I woke up, I did, what the display on the Z10 wanted: Restart the device.
The then following boot sequence was fast and smooth, reaching the 100% in just under two minutes, no freeze, no hangers, no being stuck.
There I had my bare device on which I could copy my previously carried out backup again in no time!
Of course I had to reenter the some passwords and the SMS were gone, but looking at the last days, I think this is the biggest progress of it all ;-))
THIS is how I did it. Of course I know that I defied against some of the most important rules and therefore I can and will not give You any guarantees that this "solution" will work unlimited, but considering my high level of frustration and how angry I was, these measures seemed legit to me and I can tell, they just worked fine! ;-)
the steps in summary:
- Backup all Data
- do a Security Swipe
- extract SIM
- reset to factory presets using BlackBerry Link
- re insert SIM
- look for provider updates
- install
- copy previous backup to device
- don´t worry
- be happy
PS: Don´t panic, if it takes longer or if nothing seems to happen. What I burnt mostly the last days, where minutes, hours and days
Thumbs up and fingers crossed. I hope this might help You aswell!
If it does, feel free to like this "solution" :-)
Paddy
Sorry for not being detailed enough.
I have Vista: Ultimate 32 bit edition. Everything works the stereo the 5. surround sound but the main things I did notice is that alot of the options like the crystalizer and various options wouldn't save. They would definately work just when I went into creative console to adjust some more they all went back to the default settings even though they worked and were changed earlier.
Whilst playing Call of Duty 2 it wouldn't use the EAX, I haven't tried other games . I would recommend staying with XP as of right now if you have uninstalled Vista and wait for proper drivers , there is no guarantee the way I installed or explained how to fix will work for you. Just as others before have gotten things to work with different steps to install they did not work for you, so mine not work for you. If you still have Vista installed then why not give my simple step a shot in my first post.
Similar Messages
-
How to check Exadata plug-ins are installed and running?
Hi ,
I have quarter rack Exadata set-up. I wanted to check whether i have Exadata plug-ins already installed and running or not ?
Is there any way to confirm this ? I can see grid control running on separate host and several other production dbs are registers with it for monitoring. But not sure whether Exadata db is registered to it or not ? I believe, i need to install agent and additional plug-ins to have it monitored via grid control.
Can i check that ? Is there any way ?
I am new to OEM and yet have not explored it.I haven't worked with Exadata myself but the installed plug-ins should be visible under Setup (upper-right-corner of the Grid Control Home page), Management Plug-ins.
Eric -
How to get the Broadband Tuner to install and work.
How do I install Broadband Tuner and make it work?
The specs say PPC and 10.8 won't run PPC apps.
In fact, PPC apps have not run on Macs for quite a while.
https://www.macupdate.com/app/mac/20020/apple-broadband-tuner -
How to install and run USB device application without NI-VISA environment?
Hi everyone:
I develop a LabWindows/CVI8.5 application that uses a driver for a USB device created using the NI-VISA 4.6.2. The application is ok when the NI-VISA environment is installed in PC. But the NI-VISA 4.6.2 is too big(326M). Can be the USB device successfully installed in non-development machine without NI-VISA 4.6.2? Just need some files, such as INF, NiViUsbK.sys and ni-visa32.dll, the device will be installed and run. If the way is feasible, please tell me how to do. Which files are necessary to the device is installed in non-development machine without NI-VISA 4.6.2 environment? It is so big, I need a minimum NI-VISA system.
I need your help.Personally I use the open source LibUSB. It links without difficulty with
CVI. And it works both on Linux and Windows, which is a big plus. Haven't
touched it in 2 years though.
Guillaume Dargaud
http://www.gdargaud.net/ -
ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?
Your media is stored in Final Cut Events folder > "name of event" > original media. The Final Cut Events folder is in your movies folder or at the root level of an external drive if you are using one to store your media. Simply open iMovie and under file menu select import movies. Navigate to the original media folder and import your clips to Imovie event library.
-
Please tell me how you got the computer to reboot again once it was on the black screen saying "setup is inspecting your hardware configuration?"
Hi,
use the power-switch on the left backside of your iMac to turn your Mac off.
Use it again to restart your Mac and hold down the Alt/Option-button to get to the Boot Selection screen.
Choose OSX.
Once in OSX go to System Preferences - Startup Volume and reset it to use OSX as the default.
Am I right assuming that you try to install Windows XP on a new (2011) iMac ?
If so, XP is no longer supported by Apple for use/install With BootCamp.
But there are some success stories when using a XP with SP3.
Regards
Stefan -
I got the iPhone 5s this morning and I kept my number and as soon as it charged I got all my messages, but when I connected it to my iCloud and backed it up, when it was finished all the messages I received were gone. How do I get them back?
Hi sofia124,
Welcome to the Apple Support Communities!
It sounds like you may have either set the iPhone up as a new iPhone or restored from a backup that didn’t have your messages on it. If you do have either an iCloud or iTunes backup that you believe has your messages saved, you can restore from that backup to recover your information. Please use the attached article as a reference for restoring from a backup.
Back up and restore your iOS device with iCloud or iTunes
Have a great day,
Joe -
i just got the macbook air for christmas and i also got the dr dre headphones so i am trying to enable my soundcheck on my iTunes but i cannot figure out how to find where sound check is located can someone please help!!
Go to the iTunes menu > Preferences > Playback.
-
how to get the list of only installed bundled software on mac os X through programmatically???
I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger. -
How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)
Thanks for your help.Hi ..
You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase. -
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it -
i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk
Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf -
when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?
Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way. -
How to rename the button "Give FInal Ratings" in appraisal.
Hi,
How to rename the button "Give FInal Ratings" in appraisal. (In Manager Appraisal the manager finally clicks on "Give Final Ratings" button. I want to rename this button.)
I tried through personalization but could not locate the button name in the personalization structure , so that I can rename it.
regards
Edited by: Maya on Nov 24, 2012 11:23 PMHi Maya,
In personalization, find the item with simiilar word pattern . For Example : "%Final%Rating" or something like this.
You will get the item as well as block name.
As per my understanding , If you want to change the button label , then set the property : LABEL for that item.
Apply and Save the personalization.
Switch over responsibility and retest the case.
HTH
Sanjay -
How to find the of Oracle software types and versions installed
Hi,
How to find the of Oracle software types and versions installed on RedHat Linux AS machine and Sunsolaris10 machine?
Regards,
MathewI'm not sure about your point.
You can use "opatch" command-line
cd $ORACLE_HOME/OPatch
./opatch lsinventory -detail
PRODUCT NAME VERSION
============ =======
Advanced Queueing (AQ) API Patch 10.1.0.4.0
Advanced Queueing (AQ) API 10.1.0.2.0
Advanced Replication Patch 10.1.0.4.0
Advanced Replication 10.1.0.2.0
Agent Required Support Files Patch 10.1.0.4.0
Agent Required Support Files 10.1.0.2.0
Assistant Common Files Patch 10.1.0.4.0
Assistant Common Files 10.1.0.2.0
Authentication and Encryption Patch 10.1.0.4.0
Maybe you are looking for
-
Trying to update from os 9.2 to os 10.4.10
Help wanted! Just found an imac g3 power pc, 700 mhzk, 1 gig of ram installed with os 9.2. Found 9.2 software and reinstalled it, also updated to firmware 4.1.9 successfully. Tried installing os 10.4.10 via firewire using my imac g5 power pc in targe
-
Inexplainable 2008 Failover Cluster Issues
Hi, We have a 2008 Failover Node & Disk Majority SQL 2005 cluster. There are 2 nodes in the cluster with 2008 Ent 64-bit SP2 installed. At around 00:20 each morning we see various FailoverClustering errors in the event logs on both servers. EventID:
-
Whenever I ask Siri to send a message to a contact, it will attempt to send it as an iMessage. This is a problem because it will attempt to send iMessages to contacts of mine which aren't even iPhone numbers. Is anyone else having this problem? So, t
-
Af:treeTable: how build tree that displays multiple columns?
I only find a default single column behavior in the dev guide regarding af:treetable. Perhaps some of you might have already tried this out, I'm trying to build a master detail using a treetable with multiple columns. After establishing the ViewLink
-
ESS/MSS - Floor Plan Manager - DC Model Modification
Hi, We are working on ESS/MSS business package based on FPM framework (WebDynpro). We have a small requirement but implementation of this is causing hell lot of problem. So I am looking for expert opinion on this. We are modifying Address Data DC for