How i implement sending a mail on local system also i want to see these mail as a receiver

Plz any one tell me ,
how can i implement sending a mail on local system also i
want to see these mail as a receiver.
any suggestion appreciated.
Regards
Prashant

Do some research on setting up an SMTP Mail Server. You need
one running somewhere on your box or on your network. Your box
would be 127.0.0.1 your network would be 10.x.x.xxx as given to you
by your network gurus. You may run into firewall issues also. Port
is typically 25. The SMTP server (the one that comes with IIS does)
often has settings to prohibit relays from external sources (CF
would be considered external). When I first got into this, I didn't
understand the concepts and tried to get my own IIS supplied SMTP
server up and running. It never worked (even efter permitting
relays), most likely due to the Corporate Network and security
properties and Firewalls etc. When I finally figured all this out ,
I was able to ask the Network Guru's, "Do we have an SMTP server I
can access?". Turns out they had something built into or bolted
onto MS Outlook Exchange Server, they gave me the IP, and presto,
everything worked as advertised.

Similar Messages

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

How do I send a rescue email? I also have problems making a rescue email

How do i send a rescue email? I also have problems making a rescue email!?

Hi JOFFERY,
Thanks for visiting Apple Support Communities.
If you need to add or change a rescue email on your Apple ID, see this article:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
All the best,
Jeremy

My mail was hacked and now I can't see my mail on icloud. How do I reset it?

My mail was hacked and now I can't see my mail on icloud. What do I need to do to fix it?

http://support.mozilla.com/en-US/forum/1/625180

How do I send a scanned document from my 5520 e printer to an e-mail contact

how do I send a scanned document from printer to e-mail account (5520 e-all-in-one series

Hey Storm46,
The answer to your questions is: YES.
To do so:
Set up a custom email for the printer through the HPConnected.com website for your printer. For information on how to setup ePrint click here.
Get the Scan-to-Email app for the Photosmart 5520 through the HPConnected website
Set up this feature and it will provide you the ability to scan a document and email it from the customized email for the printer
Scan an item and send it to your personal email
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to open the Enterprise manager10G in Local system

I installed the Oracle 10g in my Local SYSTEM that OS WIN XP professional , installed Configured perfectly I was getting the enterprise manager .
After some days when I click the link I am not getting Enterprise manager Options
Some ipaddress problem something
http://IP ADDRESS :1158/em
OR
http://computerName:5500/em/console/
Is there any other other way i will get the enterprise manager .
I can login to SQL , with all SYSTEM and all users .how i can open the enterprise manager/DBA Module
Please help me

Thanks[b] woodster/Madrid
AS per ur message i reconfigured the EM.. I got the EM main page but
its giving the following message display
Database Instance: orcl
Enterprise Manager is[b] not able to connect to the database instance. The state of the components are listed below. Page Refreshed Dec 7, 2007 11:21:03 PM
Database Instance
Host 192.168.1.113
Port 1158
SID ORCL
Oracle Home C:\oracle\product\10.2.0\db_1
Listener Status Down
Host 192.168.1.113
Port 1158
Name LISTENER
Oracle Home C:\oracle\product\10.2.0\db_1
Location C:\oracle\product\10.2.0\db_1\network\admin
Details TNS-12541: TNS:no listener
AND when i click the DATABASE then its giving the
Database Login
* Username
* Password
* Connect String (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.113)(PORT=1158)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
* Connect As NormalSYSOPERSYSDBA
Save as Preferred Credential
Then displaying the Database Error
Io exception: The Network Adapter could not establish the connection
But i am getting this way in SQL prompt
SQL> connect sysman/mahesh as sysdba
Connected.
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL>
How do i get the EM main menu and dabase

How to download a report prg into local system

how to downlaod a report program into local system

Hi
Goto Function Builder se37 and select WS_DOWNLOAD
so you wil get the function module WS_DOWNLOAD in your report,then there wil be a option called path=' ',so give the path where u wanna download a report program....
datsit...
REWARD PLEASE

How to implement the security notes in Java System.

Hi All,
For the ABAP systems we use RSECNOTE to implement the security notes, but how do we do that in Java systems?
Any reference or guidance will be of great help.
Thanks,
Akash.

RSECNOTE is for ABAP only, and I dont think there is any equivalent for Java.
For Java , security note will guide you on how to implement.
It could be manual changes or via SDM or JSPM.
Regards,
Pinkle

How to download elearning class to our local system

hi
this is yugandhar,
how to downl;oad this link data to our local system.
is there any possibility to download data.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d92a039d-0d01-0010-82b7-a6e0bca87982

I cannot open your link.
You must be willing to download so you can work offline on them. I don't think you can do that.
Try using IE and make sure to delete all files and cache before you start.
Sanju

How to get WSID & Subnet Mask for local system

Hi,
In my application I have to show local system IP Address, WSID & Subnet Mask.
Local IP Address I can obtain using InetAddress.getLocalHost() but couldnt get any idea how
to get WSID & Subnet Mask.
Please help me out.
Thanks in advance.

Thanks for your reply,
Actually my application is using JDK 1.5 & I cannot change the JDK version because application is working on various client location.
Is there no option to get WSID or Subnet Mask in JDK 1.5. Need some alternative solution which will work in JDK 1.5

HT4262 How can I send sound to a speakers system and video to an Apple TV at the same time?

I am trying to send video to an Apple TV and I want to send the video sound to a speaker system simultaneusly. I am using an Airport Express to connect my audio system. Is this posiible?

Welcome to the Apple Community.
It does not give me the ability for multiple speakers like it does on my computer.
Sorry, but it isn't supposed to do.

I can no longer compose using my exisiting e mail data base system does not pull up existing e mail addresses

Suddenly when I compose an e mail the system no longer recognizes my existing e mail data base or e mails I have sent to clients on many occasions. I have to manually pull up the e mail copy and paste it into the send section. This does not happen when I use my g mail on internet explorer.

Hi Olivier,
Thanks very much for that. it worked on my powerbook(running Tiger). I went to the link and followed the instructions and it worked. Did i mention that my dad who has a iMac running Leopard now has the same problem. I thought i would just do the same but the Preference in Mail for Leopard is of course different. There is no icon called "Server Settings" under Accounts section like there is on mine. Do you have a link for the same kind of instructions for Leopard?
Thanks again,
Bryce

How do i send an email from an address that is not configured on my Mail accounts?

Hi, i have an iPhone 4 (iOS 6.1.2) and first i want to describe the configuration of my email accounts on the server:
I have lets say... 5 accounts (A,B,C,D and E), but i foward the B,C,D and E account to my A account and in my A account i can reply from the A,B,C,D and E account.
I have configured in my Mac so i can do this without configuring the B,C,D and E accounts and only by splitting by commas (",") the email accounts that i want to use for reply on the A account settings.
My problem is that i dont know if i can do the same on my iPhone with the Mail app.
That can be possible? Have the A account configured to reply with the different accounts that i have without having to configure the B,C,D or E accounts on the phone?
I want to add this information that maybe will be needed and is that the A,B,C and D accounts are GMail accounts and the E account its an outlook account.
Right now on my phone i have the accounts A (mail, contacts, calendars, reminders), B (calendars), C (calendars), D (Calendars) and E (mail, calendars, reminders). All GMail are Exchange and the Outlook is a Hotmail account.
Best regards,
Gonzalo Calandria,
Montevideo - Uruguay.

When I set my email to use plain text any image I add to the email still displays in the body of the text.
However, one can Command (right) - click on the image and seleect Show as icon from the contextual menu.
No matter what you do at your end, except for zipping the image, it's how the recipient has their email client setup that will determine if the image is shown as an attachment or in the body of the email.
To assure the photo doesn't display in the body zip/compress it before adding to the email. To do that you'll need to export the photo to the Desktop, Command (right) - click on it and select Compress XXXX.jpg from the contextual menu:
The recipient will have to download the zipped file from the email to their hard drive and unzip/uncompress it before viewing.
OT

How to implement Modbus Ethernet communication in Lookout, if we want to simulate the PC as PLC ?

Problem Description :
Dear Sir,
We are doing a project where we are using Lookout with
Front end Modicon PLC. The communication is by
Ethernet, using Modbus.
Since the installation is at a distant place, we wanted
to use another PC (running Lookout) to simulate the
PLC. For this, we tried to communicate
a: the server Lookout PC running Modbus Ethernet mode of
Modbus object as Master
b: with another PC (for simulating the PLC) running
Modbus Slave
We did not get any communication. (we have given the
details of what we have done, at the end of this email)
We also tried connecting the above 2 PC's as
a: the server Lookout PC running Modbus Serial mode of
Modbus object as Master
b: with another PC (for simulating the PLC) running
Modbus Slave object
Again we did not get any communication.
If instead of PC (b) we connect the Modbus simulator to
PC (a), there is no problem in communicating
Please let us know how to go about establishing the
communication between 2 PC's using Modbus serial,
and Modbus Ethernet. A detailed step by step procedure
would help us a lot.
Thanking you
Warm Regards
Raja Mahbubani
Procedure of our trial with ethernet.
This is what we have done in detail.
On PC A:
We created an object (Pot) and connected it to
the modbus data member of the modbus object say 40001. In the
properties of the modbus object we selected modbus ethernet mode
of communication and in the IP address field we wrote the IP
address of the machine B to which we are trying to communicate
i.e. 152.63.50.2.
On PC B: we tried the following two methods
Trial 1 : We created a modbus slave object and
inserted an expression for the same data memeber to which the
object was connected hoping to get the value of the pot of machine
A on machine B.
Trial 2 : We created a modbus object on machine B and we wrote
the IP address of machine A and inserted an expression for the
same datamemeber to which the object was connected hoping to get
the value of the pot of machine A on machine B.
NI Software : Lookout
Version : 4.0.1 or 4.5
OS : Windows 98
NI Hardware : N/A
Drivers : N/A
Other Hardware/Instruments : N/A
CPU : Pentium
RAM : 64
Vendor : S-Tech
Customer Information :
Raja Mahbubani
Theta Controls
IN
[email protected]
Ph: (+91) 20 4222556/7

The ModbusSlave which comes with Lookout currently supports only Serial communication. So, you cannot use Ethernet between your two PCs. At least not with Modbus Master-Slave setup (if you must speak Ethernet between the two PCs, IPASCII object lets you do that, but then you'll need to implement your own protocol).
Since all you want to do is simulate a Modbus PLC on a PC, you can use the Serial mode of communication for now. And later on just modify the Object in your Server Lookout to use the Ethernet mode.
For setting up a Serial Modbus Slave, use a null-modem cable between the two PCs (lines 2 and 3 are swapped). On your PC 'B,' create the Modbus Slave object with the right COM port for that PC. And on your PC 'A' create the regular Modbus Object as if you w
ere connecting to the Modbus Simulator box. The only difference here is the cable. The simulator box uses a straight-through cable whereas the Slave needs a null-modem cable.
Hope this helps.
Rgds,
Khalid

How to Set Up OOTB code in Local System for Telecom and how to open EM

Hi AIA team,
I have newly stepped to the vast world of AIA.
I am very enthusiastic to learn the same
1.
I have Installed Jdev 11.1.1.4
Want to set up OOTB code for Telecom
2. Open an ID to access Oracle SR
3. Want to Open EM and deploy the code there.
4. I have SCA files of some project. Could SCA files be imported to Jdeveloper.
Please help me
Contact me: [email protected]

Made a copy of MCDOKZNR report and modified external_number_check form: it used to check the number against the interval set in dc10 (as External number range), now the check tries to match any external range.It works ok for my setup, but generally it's no good since original logic is broken.

How i implement sending a mail on local system also i want to see these mail as a receiver

Similar Messages

Maybe you are looking for