How I know my vpn site is up or what commands I cn use to chek it.?

Hi Guys
How can I check if my vpn is working > I cannot ping the other side I cannot log into the another VPN asa. 5510. Is any commands I can run?

You could also use the following two commands:
show crypto isakmp sa
show crypto ipsec sa
They will show you if Phase 1 and Phase 2 are up respectively.
Witht the first you can see if Phase1 is completing or if it is failing at some point.
If Phase1 is up, then with the second command you will be able to see if Phase2 is up, and if you are sending and/or receiving traffic across the tunnel.

Similar Messages

VPN Questions... What program should I use?

I need to connect to a Watchguard Firebox X1000. The only program that I can find that might work is VPN Tracker. I just want to know what program everyone else uses to vpn and why. And if anyone else is in the same predicament as I.

I need to connect to a Watchguard Firebox X1000. The
only program that I can find that might work is VPN
Tracker. I just want to know what program everyone
else uses to vpn and why. And if anyone else is in
the same predicament as I.
It looks like the watchguard supports ipsec and pptp - so you ought to be able to use the built in client.
If you want to use ipsec and are behind NAT, you can go with vpntracker($) - if you aren't behind NAT you can probably use ipsecuritas(free).
As for what I use - I use windows built-in ipsec because NAT-T isn't broken in it (hint hint apple... and I refuse to pay what I consider to be too much for vpn tracker, which is mostly a GUI for raccoon (built in open source IPSEC tool). (of course vpn tracker did fix NAT-T with thier own kernel extension - so I would use it if it were less expensive...)

How do I download my photos to PC? What software should I use?

Hi, when I first download the photos to PC, it automatically used Adobe Photoshop. It didn't download all the photos so I tried to do it again but the software doesn't sense the ipod anymore. So I do not know how to transfer again. I think I might need another software but not sure which is the correct one. Can anyone advise me? Thank you.

Thank you for your reply. I upgraded the ipod software to ver 4.3.1 and it works. Now the PC is able to recognise the ipod touch and allows me to transfer the photos to my PC.

How to know Packing should be at Delivery level or shipment level?

Hello Experts,
As per my knowledge Packing can be done at delivery level and Shipment level but how to know at material should be packed at what level?
Thanks

Hi Prashant,
Normally we update Matl Grp Pack.Matls field in BASIC DATA 1 of Material Master in Packaging Material Data section.
Based on that details, you can get to know that if this needs to be Packed in What type of Material.
Depending upon your design of Packing you can get to know when should you do the packing.
Regards,
MJ.

How to add a new SIT in HRMS?

How to add a new SIT in HRMS? Can I do it using Other Definitions?[i] What is the navigation for it?

1. Create Personal Analysis Key Flexfiled as per your requirement thru System Administrator
2. Register / Select the Pesonal Analysis KFF in SIT form under other definitions.
Navigation: HRMS responsibility => Other Definitions => Special Info Types
3. Select your Personal Analysis KFF from LOV and select the check boxes in whichever the form you want to use this SIT. (Ex: People form, Job form or Position form etc..)

I forget my icloud passport. so i can't unlock my phone. how to know that passport

I forget my icloud passport. How to know that passport ?

Sorry, not understanding what it is you are asking. Your iCloud password is the same as your Apple ID password. If you are attempting to restore the device and you are on the Activation Lock screen, you must supply the iCloud/Apple ID password before you can proceed:
ACTIVATION LOCK
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
Cheers,
GB

Hi, how to know the standard routines.........

hi,
sap gurus,
how to know the standrad routines
user exits
functional module exits
field exits
used to process the business transaction
balaji.t
09990019711

hi,
you can find the enhancements that can be done in SD under
SPRO > SD > System Modifications. Here you can find the list of enhancements which will contain exits that can be used at order,delivery, billing etc. Also you can add new fields to pricing field catalog.
To see the all the available routines, used in copy controls,pricing routines, forumulas please see t.code VOFM.
Balaji, can i please request you to close your previous threads if they are answered by rewarding all the useful answers.
regards
sadhu kishore

How to know the battery %

tell me how to know the battery % by any software i try many but no use ....

It would help if you told us what phone you have. Normally for a s60 or better phone, you can just use Nokia Battery Monitor from Ovi Store.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

How to know if i have 32 or 64 bit?

I was wondering what command i could use in the terminal to figure out if i have a 32 bit or 64 bit OS? i am running Ubuntu 10.4 Lucid Linux. thanks :)

Benjamin.Calderon wrote:
@Tubby- I knew that the uname -a showed me all the information. and using Google just gave me the uname -a command and a lot of other uname - commands that i already knew. i just didn't know exactly what it meant because it doesn't specify on whether it is 32 or 64. but thanks for the info :)Maybe i'm just better with google (or it likes me more) ... but the first result from my search answered your question.
http://www.google.ca/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&channel=s&hl=en&source=hp&q=linux+how+to+find+32+bit+64+bit&meta=&btnG=Google+Search
Sorry if i come off as a bit of a jacka55 about this, but back when i started in computers i would have killed to be able to easily search for information like you can now-a-days ...and so many people refuse to give it a good attempt (which i chalk up to laziness and nothing more). A bit of a pet peeve of mine.

How to know vbsscript itself show state?

VBScript:
How to know vbs itself show state? (I mean showwindow)
I can use "run" to run a vbs with SW_HIDE(0), but how to let vbs know itself show state
DIM objShell
set objShell=wscript.createObject("wscript.shell")
iReturn=objShell.Run("Test.vbs", 0, TRUE)
http://msdn.microsoft.com/en-us/library/windows/desktop/ms633548(v=vs.85).aspx
For example, A vbscript run B vbscript, then how can the B vbscript know itselft show state? Hide,normal,minimized or maximized

Change:
iReturn=objShell.Run("Test.vbs",
0, TRUE)
To:
iReturn=objShell.Run("Test.vbs", i, TRUE)
¯\_(ツ)_/¯

How to know the recipient belongs to which site ?

there are two sites site-1 and site-2 in a domain, and also there is a mailbox [email protected] in site-1 and a mailbox
[email protected] in site-2.
when a user for [email protected] in site-1 want to send a mail to
[email protected] ,the hub transport role can get that the
[email protected] is in site-2, so it delivery the mail to the hub transport in site-2, so my question is how did the hub transport know that the
[email protected] located in site-2,?did it get that by inquiry the global catalog,or something else?
Please click the Mark as Answer button if a post solves your problem!

Site membership is determined with a series of DNS queries
during startup of the server; the Netlogon service is responsible for this. When you check the DNS entries of your Active Directory you’ll see not only the standard A records but also service records. These service records are used to find other services in
the Active Directory site. Site membership is determined by comparing the local IP address with information found in DNS. The Active Directory Topology service also
queries Active Directory, by default every 15 minutes, to retrieve a list of Domain Controllers and Global Catalog Server in the Active Directory site. This information is written to the Application Eventlog:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/planning-architecture/smtp-routing-exchange-2010-part3.html
it seems what your stated is the site membership of the sender , but what I want to know is the site membership of the recipient.
Please click the Mark as Answer button if a post solves your problem!

Does anyone know how I can edit a site created by another user on my imac?

Hi,
We are a family new to our imac. One of us created a site with iweb. Now I want to get to the site and edit it? I don't see the site when I start iweb...Can someone provide an answer and any recommendations on how to set up multiple sites so that we can share editing privileges?
Thanks!
imac Mac OS X (10.4.10)

elegantKB,
Welcome to Apple's Discussions area, and congratulations on your new iMac!
Here's what you need to know about creating/sharing websites with the iWeb application; iWeb stores everything you create with the app in a single file, called Domain.sites. It lives on the hard drive of the computer that created it here. If you duplicate/copy this file and move it to another Mac using the same version of iWeb, that machine will open it and you will be able to edit the site. If you configure the second machine to publish to the same .Mac account (assuming you are using .Mac), you can not only edit the site, but you can also publish the same from two separate machines.
You will need to keep track of the latest version of this Domain file if you share it.
Be careful with this file and back it up often. It contains every single page and/or Site that you create with iWeb.
See these notes for more details on how to edit and publish the same iWeb site from two separate machines.
Mark

How do I configure a VPN Site and Subnets in Lync when clients have /32 Addresses?

Hello,
I've found a few people asking this question out in the "interwebs" but no one seems to quite answer their question (Those poor souls).
In most occasions that I've seen, my customers have configured their VPN networks with a /24 (255.255.255.0) ip address. However, when those clients connect to the VPN they are actually getting a /32 (255.255.255.255) address.
This seems to pose an issue for Lync reporting when it comes to configuring a VPN site and VPN subnets.
(NOTE:You might ask why these customers are not going about best practice and using split-tunneling? In this case, they absolutely CANNOT institute split-tunneling so all traffic MUST flow through the VPN tunnel.)
For example sake, here is how I would imagine to setup a VPN site with subnets in Lync Network Configuration:
VPN (Site)
    -172.16.33.0 /24 (Subnet)
    -172.16.34.0 /24 (Subnet)
    -172.16.35.0 /24 (Subnet)
The problem is that when I run a Location Report in Lync to look at call data to/from the VPN site, it's not there. Reason being, the VPN client was given a /32 address which doesn't match up to the /24 I configured in Lync.
So, in my mind my options are:
Create a /32 subnet for each single address corresponding to a VPN client and attach them to the VPN site (What a mess).
Change the subnet mask for the 3 subnets I've defined to /32 instead of /24 and see what happens even though putting an IP address of 172.16.33.0 /32 doesn't make much sense.
Remove the subnets and site from Lync because CAC and Bandwidth control are actually useless over VPN.
Any thoughts on this?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates
Phone: 312.448.2269 | www.projectleadership.net

Jin,
/32 addresses are a valid subnet mask, however that means that a host with a IP Address of 192.168.23.4 and a subnet mask of 255.255.255.255 (/32) is the ONLY host on that subnet.
The VPN configuration is correct. The /32 mask is common with a Juniper VPN (which is what they are using) and the DHCP server that is handing out the addresses is the Juniper VPN appliance.
They have already started working out a plan to use a different internal DHCP relay which should hand out the addresses correctly.
There has to be someone else out there with this issue or that can point out that i'm overlooking one key principal with VPN subnets.
Anyone?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates Phone: 312.448.2269 | www.projectleadership.net

Please gives sample configure VPN site to site on ASA 5512-x v.9.1!

Dear All,
Could you gave sample configer ASA 5512-x v.9.1 for VPN site to Site, i use to configure on ASA 5510 V.8.2 but on ver 9.1 i never configure.
my is use that i dont know to how to configure nonat.
i saw some configration as in the attach file they just to show configure VPN but we did not see nonot on command.
http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/vpn/vpn_site2site.html
Best Regards,
HK

Hi,
The new configuration format for NAT0 / NAT Exemption / Identity NAT is the following
object network SOURCE-NETWORK
subnet
object network DESTINATION-NETWORK
subnet
nat (inside,outside) source static SOURCE-NETWORK SOURCE-NETWORK destination static DESTINATION-NETWORK DESTINATION-NETWORK
In the above
SOURCE-NETWORK contains the network on your side of the network
DESTINATION-NETWORK contains the network on the remote side of the L2L VPN
The NAT configuration presumes that you are using interfaces with the name of "inside" and "outside"
The reason you see 2 of each "object" in the NAT configuration is that there is no NAT performed for them. You would have option to do NAT for both source and destination but in this case we dont want that.
Depending how many source and destination networks we are talking about, this might need some modifying.
Hopefully this helps
- Jouni

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How I know my vpn site is up or what commands I cn use to chek it.?

Similar Messages

Maybe you are looking for