How I managed to solve the problems with the 1.2 iPod/7.0 iTunes Upgrade

As many of you know there are several people that have experienced a problem with or after upgrading their iPods and iTunes. While mine is not the definitive answer, it is one that worked for me and I hope that by sharing this, many will receive a benefit.
This applies mainly to Mac users as my platform is MAC OS X based.
Proceedure:
1. Download the stand alone copy of iTunes 7.0
2. Repair disk permissions. (I found that many of my iTunes permissions were in error after my initial upgrade to 7.0 directly via iTunes)
3. Perform a hard reset on your iPod (Menu and select buttons)
4. If your iPod is connected or disconnect it doesn't really matter, just make sure that it is ejected and not being used by iTunes.
5. Install itunes again.
6. Now iTunes is installed, it should see your iPod. (It may or may not try to sync. If is syncs let it, if not repeat step 3 with the iPod connected. This should facilitate it being seen by iTunes)
7. Perform a restore.
8. Just sit back and wait until it installs all the info back.
I tried this method and it worked. My iPod and iTunes are in perfect unison as before.
Hope this helps

Don - Specifically, what problems were you having before your fix? I'm able to upgrade my 60GB iPod to firmware 1.2, but then it gets the scrambled screen and freezes. I downgraded to 1.1.2 and re-loaded 1.2 with the same results. So far I haven't located any fixes for this problem, which could be hardware related.
Powermac G5, iMac G5, MacBook Mac OS X (10.4.7)

Similar Messages

I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

Easier and better ways to solve current problems with Acrobat?

Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
Marc

Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem.

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

Hi I am having a problem with viber on my iPod touch can u help?

i Am having a problem with viber on my iPod touch could you help

Hi there ciarafrombalbriggan,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
-Griff W.

How do i get to the de-activate all accounts in itunes?

How do i get to the "de-activate all accounts" in itunes?

De-Activateing all accounts will work only once a year if all of your 5 authorizations are used:
Log into your iTMS account
Again click onto your ID in iTunes upper right corner -> manage accounts
If you meet the above conditions a button will show up thats allows you to de-authorize all of your 5 computers

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help...

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help?

What battery life are you getting? Is it short when you are using the iPod? When it is sleeping?

TS1441 when i pluged my ipod classic 5g to PC then it shows "iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes"?then after restoring the PIOD when IPod restarted then Itunes again detect the same ER

when i pluged my ipod classic 5g to PC then it shows “iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes”?then after restoring the PIOD when IPod restarted then Itunes again detect the same ERROR.

If you are using XP, and you went through the procedure at the bottom of the previously linked document to change the iPod's assigned drive letter, and you also tried putting it into Disk Mode...
If you have not already, try shutting down your computer and disconnecting all USB devices, including hub. Start up with only standard keyboard and mouse connected. Just to be safe, put the iPod into Disk Mode again
http://support.apple.com/kb/HT1363
Run iTunes. Connect iPod to a direct USB port on computer. iTunes may prompt you about "recovery" and ask you to do a Restore. Try to do a Restore again.

How I managed to solve the problems with the 1.2 iPod/7.0 iTunes Upgrade

Similar Messages

Maybe you are looking for