How I solved my 5g iPod connection to iTunes & Updater on PC - in detail!

This can only work if your iPod will show up in Windows.
It's been three months and two pods since it all began, but here's how I did it (I really hope this helps someone - if it does pass it on, there are hundreds, maybe thousands, of people out there suffering as a result of these **** devices):
1, (I'm not sure this had any relevance - I wouldn't do it unless the rest doesn't work), but I reformatted it in windows FAT 32 (Right click ipod in 'my computer' drives list, format, complete format), don't worry if ipod then goes black & white with folder icon & message www.apple/support/ipod.
2, (Again, I'm not sure if this had any relevance, but you can change this back). Change the drive letter. To do this go to: 'Control panel', 'Administrative tools', 'computer management'. In the left window select 'storage', 'disk management' and when you select that the right window splits into two. In the lower half is all of your drives, right click the ipod and there should be an option to ‘change drive letter’
3. Remove ipod via the 'Safely remove hardware' icon near the clock. Uninstall all iPod updaters & iTunes via the 'add/remove programs' section in 'control panel'.
4. Disable any Anti Virus (I have AVG freeware), Firewall and Spyware software inc. Windows Firewall (personally, I think this is the common element among us and something I didn't realise was running as I had other software with a firewall).
5. Restart. Install iPod updaters & iTunes via your original disk. Restart.
6. When completely restarted (leave a few minutes) open the iPod updater, only plug in your ipod when prompted - At this point I got a box with my serial no and other ipod details in and the option to restore, but hit the restore button and it said something I don't remember, but was an error message. Anyway, I couldn't disconnect the pod so pulled out the cable (not recommended I know) and restarted the computer again and repeated step 6 again (removing the iPod first). This time the restore button worked - it took about 10 minutes and automatically opened itunes when done and asks you for a name for it.
7. I already had the latest iPod updater downloaded (thereby not having to go online without AV/firewall running) so installed it and updated the pod.
8. Close everything, disconnect ipod and re-activate your Anti Virus, Firewall and Spyware software inc, Windows Firewall and restart.
Hopefully the ipod will again open itunes when connected. I think the real issue is the AV/Firewall software running while installing, many are suggesting it as a cause but no one knows for definite - I read somewhere Apple are aware that their software has issues when installed with AV/Firewall software running, but no specifics or information is ever given buy so-called help staff!!!
Good luck.

Your solution worked for me as well. I took it a step further and told Symantec AV real time monitor to exclude the iPod drive. Once complete I was able to synch almost 5000 songs to my iPod. Best I can tell there was no restarts (I went to bed after beginning the process). If there had been a restart I expect the process would start again this morning but all was good.
Thank you!

Similar Messages

  • HT1386 When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    There is no Info tab in Mavericks
    if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?

    Question to all iPad users please help in this issue
    How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
    Thank you for help out.

    Hi Jamalzoal,
    Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
    p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

  • How to I get my ipod connected to wifi for the first time..it's an ipod tough 2010 version, refurbished

    how to I get my ipod connected to wifi for the first time..it's an ipod tougch 2010 version, refurbished

    Hi,
    To connect your iPod to wifi just:
         1. Open settings,
         2. Tap Wi-Fi,
         3. Make sure the Wi-Fi switch is on,
         4. Tap the network you would like to connect to,
         5. If  the network has a password then type it in and press join.
    For hidden networks(networks that don't broadcast their SSID(name))
         1. Follow 1-3 above,
         2. Tap other,
         3. Type in SSID(name) of the network,
         4. Select the security of the network,
         5. If there is a password type it in,
         6. Press Join.
    Some public networks may now show a login screen where you  may have to agree to terms and conditions, enter your email etc...

  • How to solve Oracle SQL Developer connection problem ?

    Folks,
    Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
    My OS is Linux and connects to internet successfully.
    In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
    Connection Name: DB1 (this is my database name as well)
    Username: SYS (this is the user name I used to login to the Console)
    Password: SYS (this the password used to login to the Console)
    Connection Type: Basic
    Host Name: localhost
    Port: 1158
    SID: DB1 (this is created during installing the Database)
    But the error message comes up: "Status: Failure - IO exception Connection Reset."
    Can any folk tell me how to solve Oracle SQL Developer connection problem ?

    user8860348 wrote:
    Folks,
    Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
    My OS is Linux and connects to internet successfully.
    In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
    Connection Name: DB1 (this is my database name as well)
    Username: SYS (this is the user name I used to login to the Console)
    Password: SYS (this the password used to login to the Console)
    Connection Type: Basic
    Host Name: localhost
    Port: 1158
    SID: DB1 (this is created during installing the Database)
    But the error message comes up: "Status: Failure - IO exception Connection Reset."
    Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
    password: enter_your_correct_password given at the time of oracle installation
    role: select sysdba if you would connect as sysdba else select normal for users other than sys
    hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
    to find the hostname open terminal/command prompt in oracle installed machine
    type ---> hostname
    type ---->ping hostname
    you can find the ipaddress of the server
    port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
    SID: DB1
    try it
    Good Luck

  • HT1339 My ipod is stuck at step 9 in this guide. Itunes told me to keep my ipod connected to itunes, and my Ipod shows the Apple logo as it should (though I can´t see any progress bar). Do anybody know how  long step 9 takes. I have turned off my firewall

    My ipod is stuck at step 9 in this guide. Itunes told me to keep my ipod connected to itunes, and my Ipod shows the Apple logo as it should (though I can´t see any progress bar). Do anybody know how  long step 9 takes. I have turned off my firewall.
    Please Help!

    If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
    If the issue is incurable next time, you have a one-year warranty from the date of purchase.

  • ITunes was on a drive destroyed by virus; how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

    how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

    If you connect your ipod to your computer then look in the hidden folder labeled "iPod_Control" . (This is on a Mac version, but i think it's the same for Windows) and in "Music" is all your music mixed up in different folders. Just drag the MUSIC folder onto itunes then BAM! It's done ;D
    Source:... This is what I did when this EXACT thing happened to me ;D

  • I backed up my ipod during a windows backup.  how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

    i backed up my ipod during a windows backup.  how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

    so i plugged in my ipod and it asked if i wanted to backup the files before restoring it. 
    Do you mean iTunes asked if you wanted to backup files before restoring? If so the it is in the location I posted. You don't need to navigate to the backup. Once your restore your iPod it will ask if you want to restore from a backup and present you with the backups made before hand.
    To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
    -Click the File menu and select Devices > Restore from Back up.
    Or
    -Open the iOS device's Summary tab. There are two ways to access this:
    -Click the device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.)
    -From any view in iTunes, click the View menu and select Show Sidebar. Select your iOS device in iTunes under Devices.
    -Click the Restore Backup button.

  • How do i copy an ipod playlist into itunes- the songs are already in my library

    how do i copy an ipod playlist into itunes- the songs are already in my library

    I found out an easy way....
    With iPod connected to iTunes, right click on the iPod playlist you want to export, choose the Export option on the menu that appears. 
    iTunes will prompt for a location and format to save the file.  Save playlist as an XML file using whatever name and location you want (I saved as "songs.XML" to my desktop).
    Then, in iTunes, go to File - Library - Import Playlist and selet the XML file.  The playlist will be created in the iTunes library and will contain any tracks that are refereced in the original playlist that already exists in the library.
    There may be a mesage, "Some of the songs in the (filename).XML were not imported because they could not be fund".  This is because the songs you are importing have to already be in your iTunes library.
    I just did this with my kid's iPod and it worked great.  I found this tip on Apple Support Communities (discussions.apple.com/thread/2577582?start=0&tstart=0).  It was posted by SpyglassSally and my original search question in Goole was was, "How do i copy a playlist from an iPod to iTunes".
    Thanks for the responses and I hope this helps anyone else.

  • HT1689 I use ITunes Match with my iPad. How do I sync my iPod to my iTune Match account?

    How can I sync my iPod to my iTunes Match account?

    iTunes Store: Subscribing to iTunes Match
    Apple - iTunes - Match
    iTunes Store: Troubleshooting iTunes Match
    Also try this forum:
    https://discussions.apple.com/community/itunes/itunes_match

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • I am trying to use Words with friends on my iphone 5.  How do I get rid of   "Connect to itunes to Use Push Notifications

    I am trying to use Words with friends on my iphone 5.  How do I get rid of   "Connect to itunes to Use Push Notifications

    Reading some older threads from 2012 and 2011 it appears the problem was present even then.  Part of the problem was due to people using multiple or different account id's on the various devices.  In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match.  This is very frustrating . . . any help out there?  Thanks.

  • How can i sync my iPod 5S to iTunes?

    I recently got a new iPod 5S and had to update iTunes to version 11.0, but when i tried to sync the ipod to iTunes, it didnt pick it up on devises. How can i get my ipod synced to itunes? also, when i tried to sign into my itunes account on it, it would just go back to the homescreen without it logging me in.

    http://support.apple.com/kb/TS1538

  • Why isn't my ipod connecting to itunes?

    Why wont my ipod connect to itunes? id rather not restore it so any suggestions?

    It says it cannot read the contents of my ipod and it suggests that i restore it

  • How can I sync my iPod classic with iTunes if I only have an iPad?

    How can I sync my iPod classic with iTunes if I only have an iPad?
    I recently downloaded music on my iPad via iTunes, but I can't get it to my iPod. Any help?

    You cannot. There is no iTunes application on an iPad and iPods cannot sync with an iPad.

Maybe you are looking for

  • Can no longer get to Cf Administrator page

    All of a sudden I can no longer get to my cf administrator page. When I click the link, I get a brief flash showing the login screen & page, then it disappears as fast as it appeared. I also get the same behavior from a couple of other pages I usuall

  • Error in mru internal routine: ORA-20001

    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "8845492C13CD535CF052A3C2441A41F3", item checksum = "9B2D18B

  • Function Module or BAPI to update Short text  for sales order item(vl02n)

    Hi All, I need to update the Short text for sales order item in vl02n transaction from an internal table with Delivery number and other relevant details . Does any body know any Function Module or BAPI which can accomplish this purpose . Or else writ

  • Impact to existing Software Component during EHP upgrade

    Hello Friends, I have the below query with regard to Enhancement Pack Upgrade from EHP5 to EHP6. Our Current set up ERP Version - SAP ECC 6.0, EHP5 SPS Stack 11 (Released Oct 2013) SAP_HR Level 69 (Released in Dec 2013) Proposed upgrade to ERP Versio

  • Shortcuts [ or ] plus more..... not working for Spanish Keyboard

    Hello everyone, Reciently bought a Wacom Intuos Pro Tablet.... but can't get to work with some shortcut listed for Lightroom nor Photoshop... Been reading a little more and it seems any other than English keyboards are supported with this. Any idea o