How I solved my X-Fi issues (crackling, SOD, locku

I had it lockups, crackling noises, high pitch noise (SOD), Sound was played extremely fast and extremly low a couple of times (BF2 in X-Fi mode).
After i stumbled upon this Hompage:
http://www.media-addicted.de/blog/asus-p5b-deluxe-probleme-mit-soundblaster-x-fi-und-onboard-sound-soundmax/276/
i build my own "shielding card", put it between Graphics- and Soundcard and voila, my problems went away, from one day to another. Well its only been one day so far, but it is defintly an improvement. After a longterm test, i will post again...
Anyway, this should not be the way to go for a 00$ Soundcard, i never had any problems with OnBoard Sound.
cheers
Tocs
System
* C2D 6400
* Gigabyte G33M-DS2R
* GF 8800 GTS
* X-Fi Extreme Gamer
* 2GB RAM
* 2 HDD as RAID
* Internet over WLAN with USB Stick
* WInXP Sp2

What are you going on about? Using drugs? That sounded pretty logical to me? So why wouldnt people who have half a brain do that without youre "smart" solution?

Similar Messages

How to solve this Data Configuration issue with error message ORA: 01017

Bad public user name or password. ORA-01017: invalid username/password; logon denied
How to solve this?

I'm using JCreator jdk1.5.0_7.But i don't know how
to use command prompt. When i execute my program, the
command prompt showed
Exception in thread "main"
java.lang.NoClassDefFoundError: StringManipulation
Press any key to continue...So you managed to compile your code since now you are running it. This error means that the class StringManipulation was not found. Usually an indicator that your classpath is incorrect.
What did you do to generate this error? That is, how did you execute your program?
[edit] if you did not compile your code then there is no class file StringManipulation.class and this error will appear.

How to solve a PKGBUILD dependency issue for the MinGW-w64 toolchain?

Hi,
I had the ambitious plan of creating PKGBUILDs to provide a fully functional and full-featured MinGW-w64 toolchain in Arch (starting with the AUR). For those of you not aware of MinGW-w64; it's a project that provides the more complete alternative for MinGW.org: they support a much larger set of the Win32 API and provide 64-bit support. In short: they allow you to use GCC for Windows 32 and 64-bit.
The current list of packages is here: https://aur.archlinux.org/packages.php?SeB=m&K=rubenvb
They work (roughly, for me, I'm working out the problems as people report them), but only if you build and install them manually.
I would like to ask the help of the experts that reside here to resolve the issue that handy tools like yaourt and other AUR utilities cannot build/install these packages automagically, so that people are more easily persuaded to use my packages. The dependencies here are what functionally needs to be set, not per se what the current PKGBUILDs specify, due to numerous experiments and trial and error...)
The build and install order needs to be strictly followed:
1. build+install mingw-w64-headers-base (no makedepends)
2. build+install mingw-w64-binutils (no makedepends)
3. build+install mingw-w64-gcc-base (makedepends and depends: mingw-w64-binutils)
4. build+install mingw-w64-crt (makedepends and depends: mingw-w64-gcc-base and mingw-w64-binutils)
5. build mingw-w64-winpthreads (makedepends: mingw-w64-headers-base, mingw-w64-gcc-base and mingw-w64-binutils, conflicts mingw-w64-headers-base)
6. build mingw-w64-headers (no makedepends, conflicts mingw-w64-headers-base)
7. install mingw-w64-headers (replaces mingw-w64-headers-base)
8. install mingw-w64-winpthreads
9. build+install mingw-w64-gcc (replaces mingw-w64-gcc-base)
I tried to enforce this as much as possible in the PLGBUILDs, but am unsure if everything is as it should be...
The resulting binary packages that non-AUR-users
(once mingw-w64 is in a binary repo) should install:
- mingw-w64-headers
- mingw-w64-crt
- mingw-w64-winpthreads
- mingw-w64-binutils
- mingw-w64-gcc
The issue is that winpthreads overwrites two dummy headers that have to be included in mingw-w64-headers-base, so I provide a mingw-w64-headers package omitting these two files, but unusable without mingw-w64-winpthreads. So winpthreads needs to be built when mingw-w64-headers-base is installed, and mingw-w64-headers cannot be installed before winpthreads is installed, due to these two headers (per architecture) being supplied by winpthreads in a complete form.
I will try to tune the dependencies tonight, but any help or insight into the automation process is highly appreciated!
Thanks,
Ruben
Last edited by rubenvb (2011-11-22 21:28:12)

Interesting problem.
While i don't use any aur helper, i think you can simplify your approach a bit.
Here's how i would do it (changes in red) :
1. build+install mingw-w64-headers-base (no makedepends)
this package DOES NOT include the dummy headers
1a. build + install mingw-w64-headers-extra-dummy (makedepends : mingw-w64-headers-base)
this package will include ONLY the dummy headers
2. build+install mingw-w64-binutils (no makedepends)
3. build+install mingw-w64-gcc-base (makedepends and depends: mingw-w64-binutils)
4. build+install mingw-w64-crt (makedepends and depends: mingw-w64-gcc-base and mingw-w64-binutils)
5. build mingw-w64-winpthreads
makedepends:
mingw-w64-headers-base, mingw-w64-gcc-base and mingw-w64-binutils, mingw-w64-headers-extra-dummy
conflicts with mingw-w64-headers-extra-dummy
provides mingw-w64-headers-extra
6. skipped
7. skipped
8. install mingw-w64-winpthreads
9. build+install mingw-w64-gcc (replaces mingw-w64-gcc-base)
makedepends : mingw-w64-headers-base, mingw-w64-headers-extra

How to solve RDP lost focus issue when RDP window minimized

Hello,
I have an application running on Windows 2012 server where users connect to the server via RDP client. Users run on Windows 7/XP. The application is a screen recording software which records all the activity.
Users connect to Windows Server 2012 by giving the IP Address in RDP. The user opens the applications & starts his work and recording is also started.
At an instant, the user minimized the RDP window on his Laptop/Desktop, now the screen-recording stops. As soon as the RDP window is maximized, the recording starts again.
I learned from Technet that there is a workaround by tweaking the registry on user laptop/desktop. However the problem here is that I have no control on user laptops/desktops as the users are spread in the whole world & does not belong only to my organization.
Hence is there any other way by which I can solve the issue without any registry tweak. Is there a way by which I can enforce users to use the RDP client of the Windows 2012 Server on which I have control and I can change the settings on the same.
Will Windows 2012 Server RDS services resolve the issue without any change at the user end.
This is a P1 issue for me. Hence expecting support from the community
Regards

Hi,
Thank you for posting in Windows Server Forum.
Initially suggest you to upgrade the RDP client version to RDP 8.1 for better performance.
From the description it seems you are using RDP to connect to the server. Can you please clarify again, if it’s RemoteApp application or connecting the application after RDPing to the server?
If it’s RemoteApp application and facing problem then there is one Hotfix available to try:
A RemoteApp application main window takes the focus after the applications windows are maximized in Windows
http://support.microsoft.com/kb/2862019
For RDP, you can try the following option to configure. You can configure “Keep-alive connection interval” under group policy and check.
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Services Session Host\Connections\
Configure Keep-alive connection interval: Enable and specify value
In addition to this also verify the registry setting must be set as per following
HKEY_Local_Machine \ SOFTWARE \ Policies \ Microsoft \ Windows NT \ Terminal Services
KeepAliveEnable REG_DWORD
0x00000001 (1)
KeepAliveInterval REG_DWORD
0x00000001 (1)
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

SOLUTION - How to solve the TOS0002 error issue

Hi
I have had a problem with boot error tos0002 after Ghosting image to a new drive.
I have resolved it by copying the BOOTSECT.BAK from the Vista disc to the C: drive.
I just copied and kept the old one as you can with Vista but I guess it may be similar with XP.
I reinstalled the Qosmio player from the respective disc.
I hope this helps someone because I have spent ages trying to find a fix.

Thanks for this information Emma.
Its always nice to see people who post useful solution proposals
Greets

How to solve the SMTP server issue.

I did the migration from SharePoint 2010 to SharePoint 2013 , the workflow emails are sent perfectly in SharePoint 2010 but when i configure the SharePoint 2013 the following error has occurred.
Error : The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Please let me know if you aware of this.
-Thanks,
Swapnil

That's pretty much all the settings you need to do on the SharePoint side. Does the SMTP server that you are pointing to allow incoming emails from your SharePoint server IP Address? It might only allow relay services to specific IP ranges.
Or maybe you have a firewall that is blocking it?

How to solve Bad Pool Caller issue (Windows 8.1)

I have encountered blue screen Bad Pool Caller error on my Windows 8.1 today. It happened a couple times today. I don't know why this happen.
Here is my dumps file of skydrive link.
https://skydrive.live.com/redir?resid=72664CEADF63A3F5%211215
Thanks a lot!

RW
It is never a good idea to have more than one active malware application as it leads to all sorts of instability and crashing. This is your problem. You have Kaspersky (in my opinion a leading cause of these) and Symantec (also a huge contributor)
I would remove them both and use the built in defender of some other malware application.
I would remove Kaspersky and use the built in defender.
Kaspersky is a frequent cause of BSOD's.
http://support.kaspersky.com/downloads/utils/kavremover10.zip
Symantec is a frequent cause of BSOD's.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
Debug session time: Thu Feb 6 18:43:59.993 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-41875-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:22:40.705
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 1e0, ffffe00001527878}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 00000000000001e0, Memory contents of the pool block
Arg4: ffffe00001527878, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 18:20:37.094 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-46765-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:39:00.806
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 0, ffffe0000c3c51c8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000000, Memory contents of the pool block
Arg4: ffffe0000c3c51c8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 17:26:36.420 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-61921-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 1:58:33.132
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
*** WARNING: Unable to verify timestamp for klflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 3, ffffe000010880d8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000003, Memory contents of the pool block
Arg4: ffffe000010880d8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 15:27:20.675 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-63265-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 3 days 22:11:14.531
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 8a2baf8, ffffe00008a2bb88}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000008a2baf8, Memory contents of the pool block
Arg4: ffffe00008a2bb88, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
Wanikiya and Dyami--Team Zigzag

How I solved MY 3GS wifi issues.

My Router, a Zyxel 660HW was causing very slow speeds for my 3GS. I swapped it out for a NetGear DGND33O0 and all is absolutely perfect now.
I also found that the Linksys WRT54G and GL models work. Many hotspots in my area failed the test as well. I'm not sure what brand they were, but just like at home, access was very slow.
< Edited by Host >

I have a Zyxel 660-something DSL modem hooked up to a LinkSys WRT54GS which is configured to accept 802.11g-only (there are 3 other devices usually connected along with my iPhone). It works great with my iPhone and my download and upload speeds are always pretty much right at the limit of my DSL service (5M-down, 768K-up). I've been using Linksys wireless routers for years and have always had good luck with them with all sorts of devices (currently a mixed connection bag of an HP wireless printer, Win-Vista box, MBP and iPhone).

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.

The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.

How to solve 'Payment processing is temporarily unavailable' issue ???

Does anyone know how to solve the above problem?
Trinidad was just added to the list of iTunes stores and I am trying to set up my credit card with my ID but I keep getting that error when I click 'Done' to complete the process.

Hi Ayu ... this was the info I used when filing the complaint. The follow up was conducted via email between the rep and myself.
First Name : **********
Last Name : **********
Email : **********
Lang_Country : en_US
Product : iTunes Store
Support Subject : Account Management
Sub Issue : iTunes Store account billing
GCRM Case ID : **********
See additional info below
What device did you use to connect to the store? Windows computer (PC)
Which operating system is installed? Windows 7
What version of iTunes is installed on your computer? iTunes 10.3
Choose the iTunes Store or App Store for your country: Other
Please select your country: Trinidad & Tobago
Details:
Hi good day.
My country was only listed yesterday in the iTunes store, Trinidad and Tobago. I was trying to set up my credit card (VISA) to make some purchases but when i entered the info and clicked 'Done' I keep getting the following message;
'Payment processing is temporarily unavailable. Please try again later'
How to fix this?
I have tried on 2 different PC's, both running Windows7 and even from on my iphone itself, bt still get the same error.

How to solve the issue "CUV check user equivalence failed" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

HT6001 "BtITunes PlugIn Dll has stopped working" How to solve that issue Pls?

BtITunes PlugIn Dll has stopped working
how to solve that issue pls

The following document might be worth a try:
iTunes: Troubleshooting issues with third-party iTunes plug-ins

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.

Hi im new apple user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like .! What can be this issue n how to solve it??

hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How I solved my X-Fi issues (crackling, SOD, locku

Similar Messages

Maybe you are looking for