How I survided Error 1418 after upgrading to itunes 7.0.2

IT WORKS AGAIN !!!!!!!
Problem
5.0 Gen ipod, upgraded to itunes 7.0.2 and got an icon at my ipod with a folder shape. Connecting the ipod gaves a "corrupt ipod" message. Trying to restore ipod gave a 1418 unknown error, tried many things like format the ipod at different levels without success.
Tried solutions for 3 days, I gave up and was about to purchase a Zune (didn't find my purchase receipt to claim warranty) but NOW I MADE IT WORK AGAIN!!!
-Uninstalled 7.0.2 and rebooted the PC
-Downloaded and installed itunes 7.0.1
- Boot the ipod in disk mode (press menu and play when the apple appears, then a “disk mode” sign appears
- connected and let itunes detect the ipod as corrupt, then clicked on restore
I’ll stay with 7.0.1 forever, but at the end I now have my ipod working again

There was a Windows block on me installing quicktime + itunes when I first got the ipod and what I did was googled for awhile and found a site that lets you download any version of itunes, and then I upgraded. I forget the link though but its not too hard to find.

Similar Messages

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

TS1424 Error 3212 after upgrading to Itunes 11.01

Error
Itunes could not connect with the I tunes store. An unknown error occured (-3212).
Make sure your network connection is active and try again.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
tt2

Error -42408 after upgrade to itunes 10.5

I have just updated itunes to 10.5 and I am now receiving the error -42408 when starting itunes.
I am running snow leopard on a 2nd gen macbook air

Try this article. http://forums.macrumors.com/showthread.php?t=445821. Hope this helps!

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Error message after upgrading to 7.3

i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

How come calendars and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

How come calandras and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

Hi, Did you work out a fix for this? All my calender dates (past & future) and the last 12 months of new contacts gone!!!! And yes i too back up regularly.
Previously when the great 5 upgrade happened, i did loss everything, and although I was doing backups none of that info was relative in an English way. A whole life of important, unreplaceable information gone! Never to be found.
All of my products are apple, but it seems that little people dont matter to them, with no recourse for the damage to my personal or professional life.
Extremly disappointed again!

How to fix error (-1) when upgrading iPad2 to iOS 6?

hi all,
how to fix error (-1) when upgrading iPad2 to iOS 6?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Lost music files after upgrading to itunes 7

Hi, can someone please confirm whether or not my music files have been physically deleted from my computer after upgrading to itunes 7. Many of the songs in my playlist, including MOST of the songs purchased through itunes come up with the error that the original file can't be found. I've done searches and can't come up with the files.
I want to know if they are indeed gone.
I realize that you click "I agree" to the agreement before installing and as of now this "contract" has held up. However, we'll see how well it holds up when offered software is knowingly removing personal files. I'm sure that if someone were to write a virus that destroys your computer, if it had a warning message with an "I agree" button, it would be a very difficult contract to stand by.
To my recollection, no software in the past has physically removed personal files from your harddrive on install.
So, I don't think a precedence has been set for this kind of class action.

and we refresh.

QuickTime in Safari cannot play video after upgrading to iTunes 10.2

After upgrading to iTunes 10.2 and QuickTime 10 on my MacBook Pro, the latest Quicktime version embedded in Safari is behaving strangely. When I want to play video on certain websites like " http://www.lynda.com/Aperture-3-tutorials/essential-training/59221-2.html ", the Quicktime logo on Safari browser appears and just sits there with sound only. I tried it on Firefox, the video can only be played on the lower part of my suddenly splitted screen, there is an "error" message on a Quicktime logo background.
Could anybody help me solve the problem. By the way, all these videos can be played normally on my Windows 7 desktop using both Firefox and Safari for Windows.

To make the matter more weird, the QuickTime plays normally on my Safari after I log out and switch to the administrator account of the MacBook Pro. When I change back to a normal account, the QuickTime error takes place again. It seems there must be something I configured wrongly.

After upgrading to itunes 10.5, and connecting ipad 2, message appears " IPAD cannot be used it requires itunes 10.5 or later. Go to itunes store and download the latest version." I am windows xp user.

After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

Anyone having issues with USB port power after upgrading to iTunes 11.1?

After upgrading to itunes 11.1, I can no longer use the USB ports on my wired keyboard to synch my iPhone 4s, ipod Nano, and Ipad 2. Previously, I could use this port to synch and charge the nano and iphone, and synch (but not charge) my iPad. Now I simply get an error when I attach any of the devices ("a usb device needs more power").
I currently use all four of the USB ports on the back of my imac (UPS power supply, aformentioned keyboard, a Lacie backup drive that has its own power supply, and a superdrive). Interestingly, when I unplug the Superdrive (which is plugged directly into the mac on a separate USB port), the USB port on the keyboard will work. Unplugging any of the other 2 devices does not allow the port on the to work.
I bought the wired keyboard to have the easily accessible UBS port to synch my nano as well as the fact I needed a number pad.

Get yourself a good self-powered 7 port USB hub to plug your extra devices into.
Belkin International, Inc F4U041v - Best Buy
PROVANTAGE: Belkin F5U237-APL-S Hi-Speed USB 2.0 7-Port Hub for Apple #TB857LL/A
NewerTech USB2HB7PRO 7 Port Hi-Speed USB 2.0 Hub... in stock at OWC
MacAlly TRIHUB7 TriHub - 7 Port Hi-Speed USB 2.0... in stock at OWC

Lost iTunes Library after upgrading to iTunes 7.7 HELP PLEASE

I have two issues on hand : after upgrading to iTunes 7.7 I opened iTunes and all of my music was gone except for about 1,000+ songs (3.2 GB) when I originally had about 20GB worth of songs. How can I recover my full library into iTunes ?
Second issue: when importing new CDs into iTunes 7.7 it only plays a fraction of each song before moving on to another song, whereas iTunes shows that I have the full song imported.
I really appreciate someone's help here, and does the latest version of iTunes have a bug ??

Further to my last post, I find that the purchased songs have been retained in the iTunes Library of my Mac Book - is there any way iI can restore them to the iMac?

Choppy playback after upgrading to iTunes 11

I am still on OSX 10.6.8 so I can still use Front Row on my laptop. I just recently upgraded to iTunes 11 and now playback of video will become choppy and sometimes stalls and the sound will also become choppy and unsynchronized with the video. This occurs when playing video on iTunes or Front Row. Has anyone else experienced this and if so, have you come up with a solution?? Thanks in advance.

I was also having this issue on my iMac running OSX 10.6.8 after upgrading to iTunes 11. Clearing my user Library Cache seems to have solved the issue.
In case you're not sure how to do that, open a finder window, hit Cmd-Shift-G to go to a folder, then enter "~/Library/Caches". Select all the contents of the Caches folder, and hit Cmd-Delete. You will be prompted to enter your password in order to delete these files. Restart your machine and empty the bin when you log back in.

How I survided Error 1418 after upgrading to itunes 7.0.2

Similar Messages

Maybe you are looking for