How i use my network at home for iphone dy usb

how i use network at home for iphone by USB

Look for documentation on setting up a SOCKS Proxy for Linux. Installation on the Mac is almost identical. Here's a good place to start.
<http://www.linux.org/apps/all/Daemons/Proxy.html>

Similar Messages

"Network cable unplugged" for iPhone 5 USB Tethering

I've upgraded to Windows 8 64-bit and want to use the iPhone 5 as my main wireless USB dongle and I've had this problem since Windows 7 where, no matter what I do, the Apple Mobile Device Ethernet comes up as "Network cable unplugged".
I've unplugged and plugged it back in, reinstalled iTunes, reset the network settings on the phone, made sure everythings up to date and reset the service in Windows to no avail.
Any suggestions on this one?

FIxed my problem!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below
it work for me

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
Can you help me resolve this problem ?
Thanks

On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
WSUS has its own, dedicated forum where the WSUS experts answer questions.
You should repost your question here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Paul Adare - FIM CM MVP
Aibohphobia: n. Fear of Palindromes

How to use 2g networks in pad 2

how to use 2g networks in pad 2

Hi,
ICEfaces isn't yet compatible with Portlets. We're targeting Portlet support in our 1.1 release, slated for this fall.
Thanks,
Philip
ICEsoft Technologies

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

How to use the field of 'FM for Determining Address' in report RSWUWFML2?

Dear gurus,
In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
Regards
David

I will test soon. Thanks to all involved.

How to use the camera connection kit for iPad 3rd generation?

Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

This is how you use it.

Is it legal to ban the use of Network Magic Pro for registered users

Hi
I have a question ... Is it legal to ban the use of Network Magic Pro for registered users
Cisco would he have to propose a solution : patch, reg file or other solution
Because it's certainly enough to modify one or more files to make Network Magic Pro registered ...
Regards.
Daniel

Hi Daniel,
I'm not sure if it's still possible to create a solution to it. I believe Cisco and Pure Networks (Network Magic) has ended their partnership since last year.

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
eg:
I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

If the type of inner table is standard table, you should sort the inner table by the fields before user 'DELETE ADJACENT DUPLICATES ', and use COMPARING addtion.
Edited by: Justin on Jun 28, 2009 9:48 AM

SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

Pratik,
Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
An emergency workorder is created in SAP and assigned to the technician.
The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
If you are looking to do something else with GCM that would be outside of Agentry.
--Bill

How to use one apple ID on 2 iphones 4s but not sync aps

My wife and I just bought 2 iP4s' and use Win7 machines at home for iTunes.
We have been sharing an apple ID for apps previously since we used 2 iPods + 1 iP 3 previously.
Now, when I download an app, her phone tries to download the same app.
The options under iCloud settings are...
Mail: off
Contacts: off (so we don't duplicate or copy each other's contacts)
Calenders: off (we use google calenders)
reminders: off
bookmarks: off
notes: off
photo stream: off
documents and data: off
Find my iPhone: On
Storage and backup: currently off (might be turned on later)
After reading in the forums I find myself confused...
Do we need to create 2 different iCloud accounts and can we still use 1 apple ID to purchase apps?
Will this prevent our phones from trying to sync apps? There is no setting for that in the iCloud settings.

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
When you created your iCloud account, the @me.com email address you created also automatically became an AppleID, but you used an exisiting AppleID in the first place to create the iCloud account before deciding on that @me.com address. So your iCloud account is actually the AppleID you used to initially create the account, not the @me.com address assigned once the iCloud account was active (look in your account settings on your iPhone or iPad and you can see what the iCloud account primary AppleID is).
Unless you specifically started using your new @me.com address for things, it is an unused AppleID, but it is NOT your iCloud account primary ID (that is whatever AppleID you used to create the iCloud account initially).
An AppleID is nothing more than an email address, but it is linked to an AppleID account held with Apple and thus can be used to log in to services including the various Apple stores.

No computer,How do I download a web browser for iPhone

I have an iPhone , and need a browser... I do not own a
Computer.

Actually it is due to restrictions that there is no version of Firefox for iOS.
https://wiki.mozilla.org/Mobile/Platforms
iPhone/iPad/iPod
'''We have no plans to release the full Firefox browser for iOS. The iOS SDK agreement requires apps to use Apple's own JavaScript engine''' (or none at all, like Opera Mini which downloads pre-rendered pages from Opera's servers and cannot run JavaScript code in the client). Because of this, w'''e have no supported way to distribute Firefox's rendering and JavaScript engine to iPhone users.'''
However, you can download Firefox Home for iPhone, an iOS app that uses Firefox Sync to deliver Firefox bookmarks, browsing history, and tabs to your iPhone or iPod Touch.

How to get the restriction pass code for iPhone ?

How to get the restriction pass code for iPhone ?

if you forgot it you have to restore your phone to get past that code

How i use my network at home for iphone dy usb

Similar Messages

Maybe you are looking for