How implement Enhancement Spots??

Hi Group,
I have done some thing in BADI, but, one more thing is there like "Enhancement Spots" in the same Screen.
Could you please let me know the relevance of it over the BADIs and how to implement the same , if possible through some Links/Blogs on the same.
Thanks in advance.
Regards,
Vishnu.

Hi Vishnu,
First of all, if you are using ECC 6.0, then you will fine new Enhancement Framework wiht Enhancement Spots.
From ECC 6.0 onwards, if you want to implement BADI, you need to find the respective Enhancement Spot for that BADI in the code and go to SE19 and, give the ESpot and BADI name and then implement the same.
Hope this helps, if you need enough info, pls mail me to my id:
[email protected], I ll send you docs related to the implementation of the same.
Reward Points if helpful
Regards,
Harish Kalla

Similar Messages

  • Implementing Enhancement Spot

    Hi Experts,
               I am looking for an exhancement (Function Exit / Badi ) which will should be trigegred when user presses SAVE button in PO .(Say me22n)
               As I couldn't find suitable exit / badi....I thought of using the enhancement point provided for ME22N in the PAI module.Please correct if there is any issue upto here.
    *&      Module  EVENT_PAI_FINISHED  INPUT
          text
    MODULE event_pai_finished INPUT.
    ENHANCEMENT-POINT EVENT_PAI_FINISHED_01 SPOTS ES_LMEVIEWSF01 INCLUDE BOUND.
      CALL METHOD call_view->handle_event( 'BEFORE_TRANSPORT' ).
      CALL METHOD call_view->handle_event( 'PAI_FINISHED' ).
    ENDMODULE.                             " EVENT_PAI_FINISHED  INPUT
               Then to implement the enhancement point by creating a BADI implemetation ..when we are enetering the enhancement spot name ES_LMEVIEWSF01 under the create implementations section of SE19 transctaion with NEW BADI......and when we pressed cretae implementation button...nothing is happening..I mean neither BADI is getting created...nor thorwing any error message......
           Please suggest me how to follow.......You can find above code in the include
    LMEVIEWSF01 at line no 188........
            Earlier response will be appreciated.....
            Thanks ina dvance and reward points are garunteed....
    Regards,
    Sampath

    Hi Debhasis,
       Thanks for your reply. While saving exit 12 or exit 13 will be triggered ONLY when we make changes in standard PO item TABS.
        Let's say standard PO has 10 TABS at ITEM level. We are adding one more custom TAB there  adding to that our client interest is not to include this TAB fields in EKPO structure.  Hence we have to create the TAB by using screen exit option and we successfully created the TAB.
         Now take a case that we oopen ME22N with a PO no..then user did not make any changes in all the 10 standard TABS but make changes in only custom TAB...in that case exit 12 or exit 13 will not get triggered....Because they will be triggered only when you make changes to the fields which will be in EKKO or EKPO....as we are not supposed to extend EKPO ....those two exits will not be handy for us.......
         We even tried in existing BADI's ....but no BADI or exit will be getting triggering when we do not make any changes which effect EKKO and EKPO structure....
          Please let us know . if you have any idea to counter this unique problem.
           We also request you to please let us know ,if you ahve any idea, about implementing the this particular enhancement spot. Usually we can do it by SE19. But this particular spot is not allowing us to create one...... 
    Anyway Thanks .....Let's flow the discussion...
    Regards,
    Sampath

  • Having problem implementing enhancement spot 'OI0_OGSD_XM06'

    Hi,
    I have an enhancement spot using BADI  'OI0_OGSD_XM06'. It has property 'Can only be implemented SAP-internally' checked
    under usability options. I want to know if this enhancement spot could be implemented. If yes, how?
    Thanks in advance!

    I am facing the same issue. However I learnt that we might need to use Adjusting Tool from  Object Navigator/SE80 on the implementation before transporting.

  • Steps for Implementing Enhancement Spot

    I want to do some enhancement using the Enhancement Spot 'HR_IN_MONWT_TD_VALUE'  which has the badi  'HR_IN_MONWT_TD_VALUE'.please provide me the proper steps to implement this enhancement spot.

    Exits are basically the hooks whcih SAP has provided to add your own code. There are two types of Exits:
    1. Customer exits: Implemented as Function Modules within z includes. Anybody can change it and no access key is required.
    2. User Exit: Implemented as subroutines within includes (any include except y or z includes). You need access for the specific include and then you can any subroutine (user exit) within that Include.
    BADIs are the enhanced version of user exits where the same logic is implemented via classes and object (OOP)
    Enchancement point is the latest once introduces with ECC6.0 . Not very sure about that but you can change it without any access key.
    Please go through the following link which will help you understand the exits in a much better way:
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://sap.niraj.tripod.com/id21.html
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.sap-img.com/ab038.htm
    User Exits.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    customer exits
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
    Menu Exit.
    http://www.sappoint.com/abap/spmp.pdf
    http://www.sappoint.com/abap/userexit.pdf
    http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
    http://www.sapdevelopment.co.uk/en
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • ENHANCEMENT SPOT implementation - STEPWISE

    Hello all,
    I wanted to implement enhancement spot in standard SAP code.I will be thankful if somebody can tell me the steps to implement ENHANCEMENT spot.
    Thanks.

    Hi Sandeep
    I will share some basic knowledge on them
    Enhancement points are regions where can insert our code to suit customer needs...Spots are subsets of points and created inside these points..for an enhancement point multiple active spots can exist
    For enhacement-sections : the main idea is to provide a spot to customise the existing process..eg:SAP has done a select criteria..but you need to filter it more by adding a where condition..in that case SAP suggests using Enhancement sections..At any time the first active enhancement section works...even if multiple sections are created(though ideally multiple sections are not allowed to be created)..if you do the procedure below you can see that enhancement-section when a spot is created for it...the code in the parent section is copied and given in the editable mode
    Creating spots implementations for points/sections are given below................................................................
    to Create a spot in the standard code...click on the spiral icon..screen changes to a different color...place cursor on ENHANCEMENT-POINT/ENHANCEMENT-SECTION keyword of the spot you require to create implementation for...righ click -> "enhancement implementation -> "create" -> a table control comes -> at the bottom "CREATE" button to be clicked" ...give a name and text in customer name space and save -> select the same name just given in the table control ..press 'Tick' .....you will get a space where code can be written..write the code.....save and activate
    Also check the following blogs on enhancement framework
    /people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    Reward if helpful and revert back for clarifications
    regards
    Byju

  • Enhancement Spot: WB2_CC_SETTLEMENT-- BAdi WB2_CC_SETTL_CHANGE_DATA

    Hi,
    I am implementing Enhancement Spot:WB2_CC_SETTLEMENT with BAdi WB2_CC_SETTL_CHANGE_DATA and class Interface IF_WB2_CC_SETTL_CHANGE_DATA.
    Interface IF_WB2_CC_SETTL_CHANGE_DATA have changing parameter is CR_BVB_TAB_DATA and defined as DATA.Structure of CR_BVB_TAB_DATA is available at runtime.
    Requirement is to access dynamic data of table CR_BVB_TAB_DATA fields WBELN, KNUMV and update field value of KAWRT.
    BAdi will be called in Vendor Contract Settlement ( transaction WB2R_SV ).
    I could not find trace of call badi  of WB2_CC_SETTL_CHANGE_DATA in program RWB2R_VENDOR_SETTLEMENT.
    Any information where this BAdi is called from program RWB2R_VENDOR_SETTLEMENT?
    Please suggest solution.
    Thanks,
    Somi Reddy Satti

    Hi Vikram,
    Thanks for prompt reply.
    The above transactions are belongs to Vendor Contract Settlements and under package WB2_REBATES.The BAdi's are called through classes CL_WB2_REBATE_SETTLEMENT,CL_WB2_REBATE_SETTLEMENT_1 in program RWB2R_VENDOR_SETTLEMENT.
    Enhancement Spot: WB2_CC_SETTLEMENT have following BAdi's
    WB2_CC_CHANGE_SPLIT_PART_SETTL - Change Split for Partial Settlement Dates active
    WB2_CC_REV_ACCR_ALLOWED_CHECK  - Check if reversal of accruals is allowed
    WB2_CC_SETTL_AFTER_CREATE      - Save own data after settlement document creation
    WB2_CC_SETTL_ALLOWED_CHECK     - Check if settlement is allowed
    WB2_CC_SETTL_CHANGE_BVB_DATA   - Change Business Volume Base for Settlement
    WB2_CC_SETTL_CHANGE_DATA       - Change Data before Data Transfer
    WB2_CC_SETTL_CHANGE_FINALLY    - Change Data before Settlement Document Creation
    WB2_CC_SETTL_CHANGE_HEAD_DATA  - Change Head Data
    WB2_CC_SETTL_CHANGE_ITEM_DATA  - Change Item Data
    WB2_CC_SETTL_SIGN_ADJUSTMENT   - Adjust Signs in Business Volume Data
    Thanks,
    Somi Reddy Satti

  • Enhancement Spot Activation problem after Transport

    Hi All,
    We are implementing  enhancement spot as per certain requirement. Everything is fine in the deveopment system. But once we move the object to quality system the program execution is not going into the implementation, although Enhancement spot implemention is available in Quality.
    Currently we are going into Quality system and activating Enhancement spot manually, even thoug this solves the problem we are worried about the production system. Because we wont be having access to production system.
    Has anyone faced these kind of scenarios?
    Regards,
    Antony

    I am facing the same issue. However I learnt that we might need to use Adjusting Tool from  Object Navigator/SE80 on the implementation before transporting.

  • Enhancement Spot in CRM 5.0

    Hi,
    Please let me kow if anyone has implemented Enhancement Spot in CRM 5.0. I want to understand the limitations of implementation.
    Regards
    Vamsi
    Points will be rewarded

    Hi,
    Please let me kow if anyone has implemented Enhancement Spot in CRM 5.0. I want to understand the limitations of implementation.
    Regards
    Vamsi
    Points will be rewarded

  • Enhancements spot not working at debugging.

    Hi All,
    I am implementing enhancements spot in FM 'QEST_TOLERANCE_INSPECTION' that all implementation done successfully But while i am debug this code at that time the implemented  enhancements spot doesn't appear on debugging  screen. i have put all this think i.e BREAK-POINT and all and program control also going in that position, please help me out to resolve this.
    Thanks & Regards,
    Ams K.

    Ams,
    I use ECC 6.0 ( ABAP release 701 ) where the FM 'QEST_TOLERANCE_INSPECTION' is not released for customer usage.May be you should think twice before using it.
    Check if the FM is getting triggered in the first place.
    Check if the Enh is active.Try reactivating it.
    K.Kiran

  • Enhancement spot implementation - HREIC_ACTIVITY_BEFORE_SAVE

    Hi
    I need to implement this enhancement spot - 'HREIC_ACTIVITY_BEFORE_SAVE' and change the method 'CHECK_ATTRIBUTES' in it.
    Whenever I click to implement it asks for the enhancement name which I give, but then it asks for a Class, I am giving some related classes to EIC, but all say that the interface is not a part of this class, I also gave a Z class, but whenever I go to change the method, it asks for an access key.
    I have not worked on enhancement spots yet...can anyone help.
    Thanks
    Bhavna

    Hi Bhavna,
    What you need to do is specify the name of the "z" class for the enhancement spot to create. It will create the class, implementing the interface. You can specify for it to be saved in your "package" so that it can stay with all of your other objects.
    But, if you want it to use an existing class, then you need to be sure your existing class implements the interfaces "IF_BADI_INTERFACE" and "IF_HREIC_ACTIVITY_BEFORE_SAVE".
    When you say "it asks for an access key", is it asking for a developer key or for an object access key? If a developer key, that means you need to be set up still to develop in ABAP (a requirement for implementing your own BAdI). if an object access key, you are trying to edit an SAP delivered object which is not what you want to do. On the ECC 6.0 system I'm currently working with, there does not appear to be an SAP delivered implementation for this BAdI, just one I created earlier on in our EIC project.
    Let me know if anything here helps. I can also send you some screen shots of how mine is configured.
    Sincerely,
    Glenn
    Covington Creative, LLC

  • Enhancement Spot Implementation

    Hi there,
      I need some help for the implementation of an Enhancement Spot as am quite new to this process,
    I have been given the following enhancement spot: ES_SAPRV77S to enhance SAPRV77S.
    What I did is to create a new enhancement spot in the z namespace "ZES_SAPRV77S" via SE18. From here i don't know how to proceed.There is only create new BADI but what i want is to use existing Enhancement implementation for the ES_SAPRV77S Enhancement Spot
    Can anyone please tell me if am going the right way and how to do so?
    Thanks in advance for your help
    Regards
    Didier

    Hello Didier,
    if I understand you correctly you want to enhance something, so you sould create an enhcement implementation instead.
    If the enhancement spot is of type badi choose implement from context menu of that spot or use transaction se19.
    If the enhancement spot is of type source code plugin, go to the source code search for enhancement-point and enhancement-section. These can be enhanced.
    Addional to the online documentation refer to
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/the%2bnew%2benhancement%2bframework%2band%2bthe%2bnew%2bkernel-based%2bbadi
    Regrads
    Michael

  • How to use Enhancement spot in program

    Hi gurus,
    now i am working ecc 6.0, so how to use Enhancement spot in program, can anybody explain step by step.
    Rewarded with points.
    Thanks
    Naveen

    Hi Naveen ,
    Enhancement Spot are available.
    Examples:
    -End of Executable Program, Include, Function group, Dialog module
    -Begin/End of Form routine / Function module / Method
    -End of a structure
    -End of Private/Protected/Public Section of a local class
    If you want to create Implementation , You have to right click on yellow color line and gve Zxxx and save it in any
    transport request under any dev class. Then you can write your own code and save it and activate it .
    Later If you want to Transport it you need to transport this request.
    Reqward if usefuil
    Thanks
    Jagadeesh.G

  • "How to" document for enhancement spots

    Hi,
    I am familiar with BADI implementations, but I am not so familiar with enhancement spots, and how "New BADI" instances are created from them.
    Does anyone know where i can find more information on this topic so I can understand better how enhancement spots work.
    Thanks
    Matt.

    Matt,
    Check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
    Regards,
    Masood Imrani S

  • How to edit an enhancement spot

    Hi all,
    I have an enhancement spot in program RVIVAUFT and I have to edit it.
    I was able to edit the enhacement implementation but when I run the code and see in the debugging my code is not visible.
    I then checked the enhancement spots for the implementations I changed and the code is different(my changes were not reflected).
    Can I get some help on how to change an enhancement spot.
    Thank you all in advance.
    Raghu.

    Hi Jay,
    I have gone through the first link before posting this question, but I wasn't able to change the enhancement spot in question.
    The current enhacement spot is in a package VF, do you think that might be the reason why I wasn't able to change this?
    The display/change button doesn't work.
    Moreover I thought that changing the implementation would reflect in the enhc spot.

  • How to use this HR_GET_PAYROLL_RESULTS in am enhancement spot?

    hi,
            can you explain me how to use this function modulde  HR_GET_PAYROLL_RESULTS.. i have tried this by giving the valid  PERNR AND  YEAR. but still i am getting no table records and some times as wrong table structure. can you  help me out in this regard. i have to use this FM in am enhancement spot.
    thanks in advance.
    swathi.

    Hi,
    Depending of the country for which you want the payroll result you have to define result table as follows:
    data: it_result type payXX_result.      "where XX is an abreviation of the country you get pay result for
                                                         "i.e. US, GB, NL, DE etc
    "for some countries there is no specific cluster table, therefore you must delcare it as
    data: it_result type pay99_result.     "this indicates that results are international
    now you simply call the FM:
    CALL FUNCTION 'HR_GET_PAYROLL_RESULTS'
      EXPORTING
        pernr                               = here your pernr
        pabrj                               = year you want to report
      tables
        result_tab                          = it_result.
    It will work:)
    Marcin

Maybe you are looking for