How in gods name does one navigate around in the latest itunes - (if the first version was this bad apple would have gone broke years ago)
I have downloaded the latest version of itunes (foolish me) and it is almost impossible to navigate around - are there any instructions to this rubbish - or even better, can I go back to an older version that makes sense?
I do not even know what version it is because I can't find that either.
Try this: Ctrl+B, Ctrl+S and Ctrl+/
iTunes 11 should look a lot more like iTunes 10
Hope that helps
Similar Messages
-
I just tried to delete the new itunes (Hate it & could figure out how to sync iphone any more), and I reverted back to itunes 10.7 64-bit. When I tried to use itunes, it couldnt read the library because it had been created by the newer version (why it didn't get deleted when I removed itunes I do not know), so I deleted a few itune library files that I found still on my computer. Now I have the 10.7, but nothing in it... no library items. How do it get the itunes to sync with the itunes store
This is what you should have done...
To roll back to iTunes 10.7 first download a copy of the installer from here, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2 -
Please help me, I am verging on desperation! I am flying tomorrow, so I was only trying to add some music to my iPhone.
During the process, connected to the latest version of iTunes for Windows, I was asked a seemingly innocent question-- would you like to
update your iTunes for iPhone? If only I could go back and ignore this question,
But no, I am now stuck in purgatory-- no use of iPhone, at al! -- the upgrade FAILED. Perhaps because I'm in Asia? At any rate,
I was told that I needed to reformat my phone to factory settings (losing all data!) That was the info on the pc. My phone would ONLY display
a phone cord pointing to iTunes (beckoning to connect), but I was connected to the pc already. So I had to click to reformat.
There was no other option, I browsed tha forums, was semi-assured that iCloud would help back me up. I heard about iTools,
but that also proved a dead end. My phone ended up in this grey screen, where choices are limited. They originally asked if I wanted to connect
with iTunes, but I chose WIFI. I tried many times to "activate" the phone this way, and it always fails. ( I wanted to try activating through
iTunes, but I can't go back to that original option. At times "Connect with iTunes" is only very briefly shown, but disappers before I can select
it.)
Every time I'm left with the message "Your iPhone (failed) bec. the activation server is temporarily unavailable. Try connecting phone to iTunes"
But HOW?Why did you disconnect it?
You will have to restore it.
Your data is gone if you failed to make sure it was on your computer before updating, as you always should you. -
After installing the latest iTunes updates, the computer does not recognize the ipad
I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?
I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?
-
The specific message is must download iTunes version 10.7 or later?
You will need at least Snow Leopard (10.6.8) to install iTunes 10.7. Check the Apple link below for requirements and ordering info for Snow Leopard.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?
Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers ! -
Latest version of Lightroom will not download RAW files from my D750. How does one get around this? Bought Lightroom for it's ability to manage RAW files and now very disappointed.
Here is the contents of a batch file which will convert whatever raws you drop on it:
"C:\Program Files (x86)\Adobe\Adobe DNG Converter" -cr7.1 -dng1.4 -p0 %*
Once you download the latest converter (release candidate from adobe labs, if necessary), and save the appropriate contents of the batch file (change path to match your system, and parameters to match your druthers, if applicable), the procedure is:
1. Drop raw files on bat file.
2. Import as usual (the DNGs).
Not too bad once you're set up (if DNG converter supports your raws).
Documentation:
http://wwwimages.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/dng_commandline.pd f
Note: on Mac, you may need to use "$@" (with the double-quotes) instead of %* (which is dos batch syntax), and you will need to use the full path to the converter executable file, e.g.
“/Applications/Adobe DNG Converter.app/Contents/MacOS/Adobe DNG Converter”
If too much, just use the GUI instead of the bat file.
Rob -
how does one navigate the keyboard without a mouse. Do we still use finger to move from place to place?
Yes you still need to use your finger to do all of the things that you need to use it for even if you use a wireless keyboard. You are merely adding a larger more robust keyboard to the device. You are not replacing the touch gestures features with the use of an external keyboard.
-
I moved my service from one 3G to another 3G. Itunes recognizes the name and password of the previous owner; how do I change to mine?
The previous owner did not erase all content and settings on the iPhone or restore the iPhone with iTunes as a new iPhone or not from the iPhone's backup?
Obviously not, so I suggest doing so. When you say password, are you referring to the Passcode Lock? -
How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS
How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.You should be able to just drop it into the library within iTunes.
http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
Check out the video above for a lot good info. The ringtone must be less than 35 seconds. -
How much XML/Java does one have to know?
I'm new to OA and I have a question. Besides Oracle and PL/SQL how much XML/Jave does one need to know in order to pick up this product. Does it get in your way if you don't know either? Can you get by with out it?
In other words where is that knowledge inportant?I think this thread has been discussed so many times on this forum, always search old threads before raising new! One need core java knowledge along with pl/sql to start with OAF.
You definately don't need knowledge of xml here as it is generated automatically by Jdeveloper. If you have some knowledge of j2ee design pattern , it would be an added advantage, but basic knowledge of core java is sufficient to start with OAF.
--Mukul -
Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property
I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
Step by step:
1. Create the playlist.
2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired. Here's why I wanted to do it:
I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
I hope this will help others who have a similar need.Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.
-
How to transfer songs from one iPad to another iPad using iTunes?
How to transfer songs from one iPad to another iPad using iTunes?
You can't without a third party app. If you didn't purchase the Music with your Apple ID or if the music was imported from CD's on your friends iTunes library, syncing will not work ....nor will transferring purchases.
Look at this app .... TouchCopy
http://www.wideanglesoftware.com/touchcopy/index.php -
How can I get an album to play in order on Itunes? The songs keep skipping all around to other albums that I did not want to listen to at that time?
It sounds like you might have the shuffle button at the bottom left of the iTunes (the button with the squiggly lines).
If that's not the case, then maybe you just need to sort your library by album by clicking the album tab at the top.
Is your music in a playlist, or are you trying to play it from the entire library? -
i downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone?
You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to straighten it out.
Maybe you are looking for
-
Hp laptop won't start up how do you fix this
Opened my hp laptop that was plugged in and pressed start and it made 3 beeps and then nothing what to do?
-
Is there an easy way to batch process channel swapping?
I'm creating a IR time-lapse, and I need an easy/effective way to swap the red/blue channels and do a few other things in Photoshop before I transfer the work to Lightroom to finish. I know that you can batch process for resizing and whatnot, but it
-
Why my navigational link is not working?
Hello I am a newbie and in the process of creating my first website. My problem is navigation links. I created a horizontal navigational link using Spry. I've already written the link address for each tab navigation. But when I view my web page us
-
Less Than operator not working, Greater Than operator works comparing dates
I need to compare dates to conditionally display a row. If the DateDueJulian_ID5<= AsOfDate_ID47 display otherwise don't. I get all rows but if I reverse the logic >= the condition works and only displays the one matching row. I am using the Template
-
Problem with Adobe AIR 2.7, cannot run any apps anymore
http://english.sandrostudio.com/a-strange-problem-with-adobe-air.html Above is the error I get: This application requires a version of Adobe AIr which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/go/get