How install and use both printers with Windows 7 Home Premium,32-bit?

Have Laserjet 1000 and color deskjet 5550 VCVRA-0101. How to find drivers, and how to install, and how to use printers?
Regards

Hi,
The Deskjer 5550 already included within Windows7.
Below you may find the steps to configure the device:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874725&cc=us&dlc=en&lc=en&os=4062&product=718...
The Laserjet 1000 unfortunately not supported by Windows7, as you may find listed below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to install and use Flash Player with Windows 7 64-bit edition and Internet Explorer 8.

1. Click the Start button.
2. Search for Internet Explorer.
3. Do not click on "Internet Explorer (64-bit)" or "Internet Explorer (No Add-ons).
4. Click on "Internet Explorer."
5. That will open Internet Explorer 8, 32-bit edition.
6. Now you can download, install, and use Flash Player. (It is used automatically on websites that support it.)
7. In the future, make sure you don't use Internet Explorer 64-bit edition. Delete any Internet Explorer shortcut icons that you were formally using. Make sure that any Internet Explorer icons that you now use, are opening the 32-bit edition. To see what edition you are using, click the question mark near the upper-right corner of a webpage and click "About Internet Explorer." If you don't see "64-bit" on the popup, that means you are using the 32-bit edition.

If you can not see the moving sphere: http://kb2.adobe.com/cps/155/tn_15507.html
Check the following:
Enabling Flash Player in Internet Explorer 9
ActiveX Filtering in Internet Explorer 9
Also check this:
In I.E.9, click Tools, click Internet options, click Security tab, ensure that the Internet security level is Medium-high.

Laserjet 4240n driver does not work with windows home premium 64 bit

I recently was given a HP laserjet 4240n by my employer to use in a remote office. I am using a Windows version 7 home premium 64 bit laptop. I have tried the HP install wizard - no support for this printer. I have tried downloading the "correct" driver - but that doesn't work either.
I assume that there is something wrong but I have spent hours and still haven't been able to figutre out what is wrong and how to fix it!
HELP!
Thanks,
Steve

Hello Steve04104,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Repeatedly asked to install Flash 11 on IE 9 Windows Home Premium 64 bit

From my admin account - I successfully install the latest version of Adobe Flash Player 11. Everything works fine (in that same admin account) until a system reboot. Then I receive messages from websites stating that they want me to install Adobe Flash. I do so and all is well until the reboot.
I have followed all the instructions on the Adobe main troubleshooting pages from uninstalling, rebooting, reinstalling, rebooting through the deletion of folders at run %appdat%\Adobe - Flash Folder and %\Macromedia and then uninstalling, rebooting, reinstalling etc.
Again, I receive a successful installation message and everything works properly until the reboot. Looks like a lot of users have had this problem, but I haven't found a clean answer. Thanks in advance for your thoughts.
I followed one suggestion and downloaded and ran Secunia PSI and found no older version of Flash Player installed. I do also have Adobe CS 5 Suite installed. I also started receiving messages from HP Solution Software that it would not operate until the latest version of Adobe Flash is installed. I uninstalled the HP software pending resolution. Uninstalls and reinstalls of Flash were not successful after removing the HP software either.

Hello, I too have experienced the repeating of installing Flash Player after performing a successful install. The PC is running Windows 7 Home Premium 64 bit, Internet Explorer 9.0.8112.16421, and Flash Player 11.4.402.265. The installation of the latest FP indicates a successfull install. Then when going to any site that uses FP, for example, weather.com, yahoo news, youtube, a message window indicates the latest FP needs to be installed.
I've went through the steps in thread 4613512 (FP uninstaller), 928315 (clean install), 987370 (permissions errors), the steps in this thread including deleting the %Appdata%\Macromedia folders prior to the install, removed references to Adobe 7 in the Windows registry (running Adobe 10.1.4). Also checked that Windows Media Player was not installed. It is not. All of the functions in the steps within these threads seemed to complete successfully. No errors or other problems were indicated. Would you have any suggestions on something else to try? Thank you.

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

On the MacBook launch iTunes.
From the menu bar click Store / Authorize This Computer.
Now sync your iPhone.
Apple - Support - iPhone - Syncing

How to install and use icloud in imac windows 7 based

How to install and use icloud in imac windows 7 based

Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

yes, though you may need to use compatibility mode to install.

H9-1150 PC wont Boot with WIndows 7 Premium 64 bit with ASUS 960 GTX Card.

I saw others have posted simular issues but i thought id repost this again in case there is more help. I have the Pavalion Elite Phonix h9-1150 desktop with Windows 7 Home premium 64 bit. and the HP 7.07 bios (seems no way to upgrade the bios).
The issue is like others have had i install the new graphics card the Asus 960 GTX Card which came out last month and the system starts up gives about 3 beeps in about 30 seconds each and then it goes to a black screen with a blinking curser and nothing else happens. cant enter bios or the HP settings..
I did try to disable UEFI boot devices in the bios settings and only enable legacy devices (after switching back to my original card then switching to the new card) but it still gives the 3 beeps upon booting. However i was able to enter windows. though i think it may be due to shutting off the computer with the old card in without powering down first. and after the 3 beeps happens (which still locks you out of the bios menu) it shows up the window where you can select safe mode or normal mode.. as sometimes happens if you boot up your computer with windows 7 if you had just turned it off without powering down or something. Through that i am able to enter windows and run the PC and graphics card with no issue its just when i try to boot the issue happens.
and No HP suppor it is NOT a defect with the Card itself. Like many before. i bought a EVGA Card a while back a 780 GTX and the SAME issue happend (though i didnt try the removing the UEFI boot devices then) ...
There is a spacific issue with HP computers that seem to lock out "new" hardware from booting.
Honestly ill be blunt. I really think this is poor doings I read somewhere that while HP will never state it they do this on purpose to prevent people messing up warrenty or any "liabity" occuring by people installing other hardware onto HP stock computers
that makes no since to me. the PC SHOULD be able to run the card. in fact its running it now once i was able to bypass the lock out (temporarly) check benchmarks everyhting is fine the card runs 3 times faster then the old one (as should be the case).
But its just this lockout that HP for some reason has installed on their bios/motherboards that is the issue.
Good news is i got it from amazon and i have about a month till i have to return it. which i think this time i will do. to see if anything crops up in a month or something.
The ONLY solution it seems HP offically has is that to disable secure boot under windows 8
but this is not a windows 8 computer. and i do assume even if iINSTALL windows 8 . the issue would not go away because since its an older bios there would be no way to have a secure boot option to remove?
HP you really need to get on the ball and give us a direct reply on this. Is there ANY WAY to fix this? Can you not simply make a update of older bioses to allow this? Or do you just not want to worry about older pCs?
either way i think this is wrong and very frustrating and to be honest. If this is the case when my pc otherwise SHOULD run the card
its a PCI express 16x slot that is 3.0
here is the deetailed specs as per your page
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03273835
the card SHOULD WORK fine. I thought the 780 GTX was a bit too much for the PC as it had more then a six pin port and needed a bit more power so at first i thought that was the issue. so i returned it. and got this new card now.
however the ASUS 960 GTX card requires the SAME power supply as the default GTX 550 Ti card and the SAME SIX PIN connector
so it SHOULD work.
and benchmarks show that it DOES its just the stupid bios ..that is having the issue.
i am afraid to power down the computer at the moment and try again to see if windows boots normally after disabling the UEPI boot devvices because it may not boot properly.......
HP you are one of the biggest suppliers of computers you know technology these are YOUR computers. WHY cant you give us a direct awnser over this.
ITS VERY frustrating
and to be honest if i cannot resolve this issue i am very hestient to ever buy another HP product if their computers spacifically have this new hardware lockout mode.
because i have the card running now on my pc it runs great! 3 times faster as it should! and yet i know in the back of my mind if i cant figure out this issue likely ill just have to send it back.........least i have some time.
and right now i dont have the money to buy a new pc . this PC is JUST fine for what i need for now other then wanting a bit better card...
it shoudnt be this much of a hassle should it?
Thank you.
This question was solved.
View Solution.

Hi,
You need the BIOS update that is listed under Windows 8 in order to support the newer graphics. You need to upgrade to Windows 8 or temporarily install Windows 8 so that you can install the BIOS update. While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way. The version 8 BIOS is your best chance at getting the newer graphics cards to work.
You can trial Windows 8 Enterprise for 90 days.
If you decide to install W8, then create the HP external recovery media and backup your data before you do anything.
The reality is that there is no guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

CS3 Production Premium compatibility with Windows 7 Premium 64 bit?

I am starting to think that CS is not compatible with Windows 7 Home Premium 64 bit.
Can anyone confirm this?
If so, is there a way around it?

I recommend you expand your search to include the Photoshop forum. Some people there have bene running W7 ever since the first Public Beta was released and they may know which buttons to push. It generally seems to work, though, so your issues are probably caused by a specific combination of hardware, drivers and system libraries eitehr missing or not being installed correctly.
Mylenium

Ipod classic compatible with Vista Home Premium 64 bit

Hi,
Is the Ipod Classic compatible with Windows Vista Home Premium 64 bit?
I found out the hard way that the Itouch is not!
Greetings,
Miguel

If I could I would answer your question.
But I do not know how I did that.
Itunes has been working since day 1 on my 64 bit machine, only problem is that it takes half a minute to copy album cover art to song in itunes, the computer is hanging for 15 seconds before the album cover art is copied.
I just took the Ipod out of the box and connected it to the computer and it worked fine.
Only problem that I had yesterday is that when I'm intergrating album cover art my hard disk is doing strange things.
Just yesterday, my RAID 1 was corrupted by Itunes, first hard disk 1 was failing and an hour later hard disk 2 also crashed.
Was able to reconnect them into RAID 1, luckilly.

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

How many computers can i install and use lightroom 5 with a single purchase?

I've got 2 desktops and a laptop at home. Can i install lightroom 5 and use them on all 3 devices? The database is a cloud system or will it be in the local drive?

you can concurrently install and activate on two computers.
you can save files using adobe's cloud file service (mainly to sync your files) but you should always have local copies saved.

How can i use both speakers with 2 displays

i am using 2 27" displays with my powermac but the sound only comes out of one. does anyone know how i can have the sound come from both display?
also, does anyone know how i can control which camera is being accessed by iphoto.
thanks.

For the audio you most likely need to use Audio MIDI Setup (in your Utilities folder) and create an "Aggregate Device". This doc might help.
I don't have an answer for the camera question.

Everytime I get on the internet it takes 5mins or more, and when it finally loads the thanks for installing firefox and thanks for installing personas pages are up even though I've already installed and used both.

This started about two weeks ago. I had been using personas and firefox without any trouble, but now it takes 5x's as long to load if not longer and the persona I've chosen from my previous web visit is not up, but rather a default persona is.
== This happened ==
Every time Firefox opened

Your settings are not saved. try with new profile.
Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How do you use web inspector with Windows 7

I plug in the USB cable from my Windows desktop to my phone, The drivers are loaded successfully, but where can I find the Windows equal to Safari's advanced preferences.

You can't. Web Inspector can only be enabled from a Mac computer. Not Windows. As it requires the Safari browser on the computer, and the last version of Safari for Windows was discontinued years ago and did not have that feature any way.

How install and use both printers with Windows 7 Home Premium,32-bit?

Similar Messages

Maybe you are looking for