How Install OEM Management Pack / Tuning Pack / Diagnostics Pack for 10g ?

Where I find Management Pack / Tuning Pack / Diagnostics Pack for 10g ?

There's no 1:1 relationship between the old and the new features. Mainly under the Performance tab you will find the features now. Out-of-the-box there are a lot of alerts active (disk and CPU utilization, tablespace getting full, bad SQL statements ...), these are shown automatically for a specific target, when a certain metric has reached. You can customize pre-configured alerts and also create new ones.
I recommend you see the gridcontrol documentation for more informations.

Similar Messages

How install solution manager using MCOD

Hello Eveybody,
I have install the IDES ECC 6.0 on single machine. Now I want to install the Solution manger using MCOD. but I dont Know How to ? Will anybody guide me how to install solution manager using MCODE,
I have HDD of 320 GB
Waiting for earlist reply
Thanks
Ganesh

Hello Ganesh,
For installing on MCOD, the database instance should be on the same database host. For installation when you run sapinst, you should mention the database id (DBSID) for the solution manager as the ECC6 database DBSID. It will then automatically pick the installation as MCOD.
In other words, the SAP SID during the installation should be the new system ID for solution manager but the Database SID should be mentioned as the existing DBSID.
For more info, refer the following:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a1b7a6-8307-2a10-05bc-d4388cbd4201
Cheers,
Jazz

Enterprise Manager - sql tuning advisor , Access advisor for SQL Tuning

Hi,
NO I mean in oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL ADvisor and SQL access advisor.
I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if some one could explain me that process...
Again thanking you in advance
regds
Manoj Gokhale

Hi Manoj,
tune sql statements using the SQL ADvisor and SQL access advisor.Do you have the OEM extra cost "performance pack"?
The OEM screens are fairly self-explainatory, but here are some references on the 10 SQL tuning advisors:
http://www.oracle-base.com/articles/10g/AutomaticSQLTuning10g.php
http://www.remote-dba.net/oracle_10g_tuning/t_oracle_sql_tuning_advisor_session_example.htm

How to make Management of row level restrictions easy for webi reports?

Hi all
Our BO Product version is 12.3.0.601 (BO 3.1)
We are applying row level security for webi reports at universe level...
Since Universes are more in Number we have to create same restrictions and apply it to the users lets take a restrictions on region....which is common across all universes.
So the problem lies with the management of restrictions created at universe level.
Can we have a setup in where we can centralized the restirctions at a place so that management would be easy ......???
Shall we have to import the roles(restrictions) from R/3 or BW or Database level...?
Then how we will restrict our report (webi) to a region?????
So basically webi reports should run with the restrictions lets say region....How we will achieve this?/
Thanks and Regards
Ritu Raj

Hi,
what is your Datasource?
If its SAP BW i would highly recommend you use the SAP Authentication in your BOE XI 3.1 So the users log into BOE with their SAP Username and Password and than the Data restriction of your BW takes place when the users run their Reports.
Informations on how to confiure the SAP Authentication you will find in the installation Guide of the SAP ITK.
Regards
-Seb.

How to include Managed bean class in build sciprt for taskflow (Jdev 11.4)

Hi,
I've developed a custom taskflow to be deployed in the webcenter spaces. The taskflow that I developed contains managed beans. I am using oracle provided build script with the sample application, to deploy custom taskflow. After the build, we don't see any .class files (managed bean files) in the generated war file. Once we deploy the taskflow into the space, it is failing may be because the managed bean class files are missing in the <taskflow>.war. Am i missing something? Should we specifically include the .class files in the build script?
Below is the oracle provide build script..
<?xml version="1.0" encoding="US-ASCII" ?>


<project name="WebCenterSpacesSharedLibExtension" default="all" basedir="."
xmlns:wls="oracle.webcenter.tools.wls">
<property file="../config.properties"/>
<property file="build.properties"/>
<import file="internal-targets.xml"/>
<taskdef resource="net/sf/antcontrib/antcontrib.properties">
<classpath>
<pathelement location="${jdeveloper.install.home.directory}/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar"/>
</classpath>
</taskdef>
<target name="clean-stage"
description="Cleans the output directory and generates the war"
depends="clean, stage"/>
<target name="deploy-shared-lib"
depends="init-wls"
description="Deploy the extending WebCenter shared library">
<echo> ---------------------------- </echo>
<echo> ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} ${oracle.jdeveloper.deploy.dir}/exploded ${wls.webcenter.app.target} ${customer.library.name}</echo>
<exec logerror="true"
executable="${jdeveloper.install.home.directory}/oracle_common/common/bin/${wlst.executable}"
dir="${jdeveloper.install.home.directory}/oracle_common/common/bin">

<arg line="${extending.spaces.home.dir}/WebCenterSpacesSharedLibExtension/extspaces.py ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} ${oracle.jdeveloper.deploy.dir}/exploded/${customer.library.name}.war ${wls.webcenter.app.target} ${customer.library.name}"/>


</exec>
<echo> ---------------------------- </echo>
<echo> Restarting the app </echo>
<echo> ---------------------------- </echo>
<exec logerror="true"
executable="${jdeveloper.install.home.directory}/oracle_common/common/bin/${wlst.executable}"
dir="${jdeveloper.install.home.directory}/oracle_common/common/bin">
<arg line="${extending.spaces.home.dir}/WebCenterSpacesSharedLibExtension/redepwc.py ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} "/>
</exec>
</target>
</project>
Thanks in advance
Nitin

Hi,
I've developed a custom taskflow to be deployed in the webcenter spaces. The taskflow that I developed contains managed beans. I am using oracle provided build script with the sample application, to deploy custom taskflow. After the build, we don't see any .class files (managed bean files) in the generated war file. Once we deploy the taskflow into the space, it is failing may be because the managed bean class files are missing in the <taskflow>.war. Am i missing something? Should we specifically include the .class files in the build script?
Below is the oracle provide build script..
<?xml version="1.0" encoding="US-ASCII" ?>


<project name="WebCenterSpacesSharedLibExtension" default="all" basedir="."
xmlns:wls="oracle.webcenter.tools.wls">
<property file="../config.properties"/>
<property file="build.properties"/>
<import file="internal-targets.xml"/>
<taskdef resource="net/sf/antcontrib/antcontrib.properties">
<classpath>
<pathelement location="${jdeveloper.install.home.directory}/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar"/>
</classpath>
</taskdef>
<target name="clean-stage"
description="Cleans the output directory and generates the war"
depends="clean, stage"/>
<target name="deploy-shared-lib"
depends="init-wls"
description="Deploy the extending WebCenter shared library">
<echo> ---------------------------- </echo>
<echo> ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} ${oracle.jdeveloper.deploy.dir}/exploded ${wls.webcenter.app.target} ${customer.library.name}</echo>
<exec logerror="true"
executable="${jdeveloper.install.home.directory}/oracle_common/common/bin/${wlst.executable}"
dir="${jdeveloper.install.home.directory}/oracle_common/common/bin">

<arg line="${extending.spaces.home.dir}/WebCenterSpacesSharedLibExtension/extspaces.py ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} ${oracle.jdeveloper.deploy.dir}/exploded/${customer.library.name}.war ${wls.webcenter.app.target} ${customer.library.name}"/>


</exec>
<echo> ---------------------------- </echo>
<echo> Restarting the app </echo>
<echo> ---------------------------- </echo>
<exec logerror="true"
executable="${jdeveloper.install.home.directory}/oracle_common/common/bin/${wlst.executable}"
dir="${jdeveloper.install.home.directory}/oracle_common/common/bin">
<arg line="${extending.spaces.home.dir}/WebCenterSpacesSharedLibExtension/redepwc.py ${wls.userconfig} ${wls.userkey} ${wls.host}:${wls.port} "/>
</exec>
</target>
</project>
Thanks in advance
Nitin

How do I manage (i.e., limit) storage space for Messages?

How can the amount of storage space for Messages be limited and/or managed? Messages are currently taking up nearly 600MB of my iPhone and iPad devices storage space. Deleting old message threads does not appear to reduce it. And I don't consider myself to use messages excessively.

How can the amount of storage space for Messages be limited and/or managed? Messages are currently taking up nearly 600MB of my iPhone and iPad devices storage space. Deleting old message threads does not appear to reduce it. And I don't consider myself to use messages excessively.

How do I manage two apple ids and iCloud for my teen's iPad?

Before my son turned 13, he used my Apple ID to set up his purchases for his first iPad. Now he has his own apple ID. He has his own iPhone and a different iPad for school. The school wants him to use iCloud to back up everything.
I just set up iCloud but it wants to back up the items from my ID only. How do I get it to back up from his ID too?
How can I even figure out which items are linked to his Apple ID and which ones are linked to my Apple ID?
For next school year, I want everything to work with his ID, not mine. I wish I had just made him one in his name when he was 12!
I'm not so worried about the apps, photos, etc. I am more concerned about his documents from Pages, Keynote, iBooks... I think when he does his schoolwork it is saving to my Apple ID and not his.
I've avoided syncing to the computers because we have 3 users with different IDs and several different devices and after a while it gets really confusing to know what belongs to whom.
I know that a lot of people are frustrated that you can't merge Apple IDs -- seems like Apple ID is built for single people and not growing families who hand down older devices to other family members.

You can see which ID he is signed into for iCloud by going to Settings>iCloud on his device(s) and viewing the ID shown next to Account. This is the account that his documents are being store in, and the one his device is backing up to (if he is backing up to iCloud).
While it is possible to have more than one iCloud account on a device, there are limitations to the typed of data that additional ("secondary") accounts will sync. Only the primary account (the one listed in Settings>iCloud) can be used for photo stream, bookmarks, documents, iCloud backup and Find My iDevice. Because of this limitation, it isn't possible to sync (or "back up") documents from iWork to more than one iCloud account.

Remove Diagnostics Pack, Database Tuning Pack :Oracle 10g

Hi All,
I want to remove Application Server Configuration Pack, Application Server Diagnostics Pack, Database Configuration Pack, Database Diagnostics Pack, Database Tuning Pack from 10g due to license restriction. How can I remove these packs from command line syntax in 10g as I don't have GUI access so unable to perform from OEM?
Regards

Thanks Srini,
According to link provided by you we can revoke license with emcli tool but it is not installed with current database (10.2.0.4.0).
Please advice is there any procedure available which can disable all these packs in 10g.
Regards

How to install the management packs in OEM.

Hi,
I need to install the OEM with Management packs for a customer on windows. Now i have installed the OEM 11g on one server and installed the agent where ever required. Now i am able to do basic moniotoing with any issue. Now i need to install following packs as a part of the contract. Could any body help me to do the same?
================
     Diagnostics Pack.
     Tuning Pack.
     Change Management Pack
     Provisioning and Patch Automation Pack for Database & Management Pack Plus for Identity Management.
     Application Management Pack for E-Business Suite.
================
Regards
DBA.

Database Provisioning and Patch Automation Pack
Automates deployment of software, patches and servers. This pack provides functionality for provisioning of operating systems and software images, cloning of existing installations and software images on both bare-metal and live machines, and patching. Sizeable decreases in person-hours and costs can be achieved by using mass provisioning and patching, offering an easily quantifiable return on the investment of this management pack. Key features include the following:
- Extensible, out-of-box best practice Deployment Procedures for provisioning and patching
- Database and Oracle Home cloning
- Database, RAC Extend Cluster and Add Instance-Single instance-to-RAC conversion-Bare metal provisioning (i.e. Linux)
- Automated patching for the Oracle Databases and underlying operating system (i.e. Linux, Solaris, Windows)
- Software Image Library
- Deployment Procedure Manager
- CLI driven runtime
- Critical Patch Facility
- Enterprise Security Advisory
- Provisioning and deployment reports
Standalone Provisioning and Patch Automation Pack
Automates deployment of software, applications, and patches. This pack provides functionality for bare metal provisioning of operating systems and software images, cloning of existing installations and software images (such as CRS/RAC and AS), and patching. The Standalone Provisioning and Patch Automation Pack includes:
- Software Image Library
- Database and Oracle Home cloning
- Database, RAC, Application Server, and Application provisioning
- Extend Cluster and Add Instance
- Single instance-to-RAC conversion
- Bare metal provisioning
- Deployment Procedure Manager
- Automate patching (including staging) for Oracle software, Oracle Homes and operating systems
- Critical Patch Facility
- Enterprise Security Advisories
- Provisioning and deployment reports
Regards
Rob
http://oemgc.wordpress.com

How to have clients download a service pack to local machine but delay install until management gives approval for install.

I am looking to update all of our office products to the latest service pack. The service packs have to be pushed out to roughly 6000 machines. I am still waiting on approval for the installation which I know is coming but
it has to be routed through the proper channels. What I am trying to do push the service pack out ahead of time but not install it until I get the green light from management. Is this possible?

Sure. two things come to mind...
1. Create a package that contains the SP files and a bat file that would copy the SP files to a temp folder. Run that package. When you get the green light run a second package that has no source files, it simply runs the install command from the prestaged
location.
2. Using software updates... This will be a bit more tricky because users may see notifications about the update. Just be careful to hide those. Updates begin downloading at the avaiable time.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

How to install the Oracle Enterprise Manager Database Tuning ?

Hi,
How to install the Oracle Enterprise Manager Database Tuning with the Oracle Tuning Pack
Release 9.0.1
And where to get download this.
Thank u..!

The only way you can get 9iR1 release software is by asking it to your Oracle representative. The oldest 9i release available for public download is 9iR2.
You could try the administrative 9iR2 client, it can work with 9iR1 releases.
~ Madrid.

Are Tuning pack, Diagnostics pack available on Oracle 9i?

hi,
Tuning pack, Diagnostics pack are available on oracle 9i?
If yes, how can I set it?
thanks & regards,

You are confusing one for the other. You have probably heard of AWR requiring the Diagnostics Pack and wonder what the pack can do in 9i if AWR is not available in 9i.
Usage of AWR and related features available from 10g requires the Diagnostics Pack. However, usage of the SQL Advisors requires the Tuning Pack.
The two are separate packs. These are products from the Oracle Enterprise Manager stack.
Tuning Pack and Diagnostics Packs have been available in 8i as well.
So, you can purchase these packs in 8i, 9i, 10g, 11g . If you have purchased them and paid annual support fees, you can upgrade them.
What you can do with the packs may well vary in each version. Thus, AWR is not available in 9i and below.
8i : http://download.oracle.com/docs/cd/A87860_01/doc/em.817/a85250/ch5.htm#1007872
9i : http://download.oracle.com/docs/cd/B10501_01/em.920/a96674/packs.htm#1015821
Since 10g, Oracle also includes a Licencing Guide in the documentation set.
See http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF
and http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm
Hemant K Chitale

Errors in OEM with Diagnostics Pack

all,
when login as oracle, the user used to install oracle9i and oem I can access diagnostics pack under oem. However when accessing it as different user and clicking on diagnostics pack and login in I am getting this:
VTD-0123: Error connecting to target PROD
No Collection Cartridge of this service type are available.
Any idea? Thanks.

Please read note 278967.1 on metalink.

How to find out the versions of family pack and mini pack installed?

There are family pack and mini pack for HRMS.
How to find out the versions of family pack and mini pack installed
just by a Unix command or sqlplus Select statement?
Thanks

you can get the Minipack version of the products by querying fnd_product_installations or ad_patchdriver_minipks, for family packs you need to query through Metalink, OR if you have u driver file which resides on $AY_TOP/discoverer, looks for the minipacks/familypack version in the driver file.

HT3986 i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assemb

i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assembled computer system, using the OEM Preinstallation kit (OPK)."

System Builder - just be sure to get 64-bit version, no one needs or wants 32-bit today, and only comes with one, while retail ships with both 32/64-bit media.
you can't install it and activate on different hardware later is all, and by then for what you saved, so what, Windows 8 or SP2 will be out.
A few people had trouble with Windows 7 SP1 for some reason and not sure exactly why, changes to the boot loader on the DVD I presume.

How Install OEM Management Pack / Tuning Pack / Diagnostics Pack for 10g ?

Similar Messages

Maybe you are looking for