How interface N5181A MXG signal generator with labview by using LAN Interface????????????

hai every one ...i have a doubt how  to interface N5181A MXG signal Generator with Labview by using LAN Interface???? and
how to find IP Address of N5181A MXG signal Generator????????
when i connect instrument with labview it shows that no instrument connected and what are the requirements for LAN interfacing with that instruments in labview and please help me?????? 

You can set the IP Address on the instrument.  You may need to be in the same subnet of your controlling computer, so you may need to set your computer's IP Address to something static.
Use VISA.  It makes life easier if you decide to use another bus (like GPIB, USB, serial, etc).  In MAX, create a network session with the static IP address you set the instrument to and use that as the VISA Resource.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • "Hi,I'm having problems controllin​g the Agilent E4422B Signal Generator with Labview. When using the Labview driver functions such as initialize instrument I always get an Error -107413504​0.

    I can query the device through the measurement and automation tool. I can also Identify the instrument by issuing a *IDN? with VISA write and read. Why do I get this error while using the drivers supplied by NI for this equipment? Any Ideas?

    Hi, Brooks.
    Attached please find the files containing all the information concerning my attempt to control the Agilent E4438C. Hope you can make sense of it and help me.
    Regards
    isaac
    Attachments:
    nireport.txt ‏2 KB
    Capture.spy ‏5 KB
    CaptureSpy.doc ‏117 KB

  • How can I record a video with LAbview?

    Hi,
    I have a question: How can I record a video with labview?
    I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
    And I would to acquire the video in labview.
    Could someone help me?
    Thanks
    Raf

    Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
    If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
    Andrey.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    Hi,
    This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
    Jamie

  • Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Cant we even use the dlls in an application?
    In order to automate Acrobat, you need to have Acrobat installed. There is
    nothing you can do with just the DLLs. As was already stated, Acrobat is
    not licensed for use on a server, but regardless of that, it's also
    not technically suitable for server use. You need to find a solution
    outside of Acrobat to solve your problem.
    It also seems that you don't have a good understanding of what is going in
    inside a PDF file. PDF is a very complex file format, and based on
    your questions
    and followup questions, you need to spend a considerable amount of time
    getting familiar with the PDF file format to understand how color works in
    the PDF context. Reader the PDF spec, while paying special attention to the
    section about color. You will find out that if you want to convert the
    color space of a "PDF file", you actually need to convert the color space
    associated with every single object in your PDF file. That is fairly simple
    for vector graphic and text, but when it comes to images, you may have to
    convert the image data. Once you have a good understanding of what it is
    you need to do within the PDF file, then you can start looking for tools
    that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
    not suitable for this task. If you want to stay with Adobe products take a
    serious look at the PDF Library, which his licensed through Datalogics (
    http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
    there are other, non-Adobe PDF libraries that you can also use, but this is
    the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
    You are wasting your time while looking for a simple solution that does not
    exist.

  • How can I  get System dates  with time scheduler using threads

    how can I get System dates with time scheduler using threads.is there any idea to update Date in my application along with system Date automatic updation...

    What the heck are you talking about and whatr has it to do with threads?
    Current time: System.currentTimeMillis. Date instances are not supposed to be updated.

  • How to creat the interface of auto CAD file with labview

     Hi
    I have been controling  2-axis Piezo motor  with labview. Now I have to use the dwg or dxf file  to move the piezo controller axis. How I can  transform the  dwg or dxf  file into  decimal number 1, -1   to create interface with my labview.

    Hi Nusrat,
    So it sounds like you want to create a CAD drawing and then control your piezo motor via LabVIEW by moving the CAD drawing?  Is that correct?
    If that is correct - I don't know of a way to do this I'm afraid.  I don't think it's really possible.
    The only potential way to do this is to use SolidWorks as your CAD program and then convert the SolidWorks drawing into an STL file, which can then be imported into LabVIEW as a 3D picture control.  I can't think of any other way to achieve this.
    These examples might help you:
    LabVIEW Interface VIs for SolidWorks
    STL Geometry in 3D Picture Control
    The Pitch Perfect Tuner
    Develop Motion Applications with RIO and SolidWorks
    NI SoftMotion for SolidWorks
    Connect NI LabVIEW and DS SolidWorks
    I hope that helps.
    Oli
    LabVIEW Student Ambassador
    National Instruments UK

  • Agilent signal generator and labview code

    Hi all
    I have Agilent 33220A Signal Generator.I want to generate square signal and convert this signal to a graph in labview with proper code but i dont know how to do.Please help i have limited time
    Regards

    sgirgin wrote:
    Hi all
    I have Agilent 33220A Signal Generator.I want to generate square signal and convert this signal to a graph in labview with proper code but i dont know how to do.Please help i have limited time
    Regards
    Limited time on your part is not our problem.
    Learning how to program in LabVIEW isn't something that can be done overnight.

  • How to make a random generator with a max and a minimum

    hello
    can anybody telle me how to make a random generator for numbers with a maximum and minimum input
    thanks in advance

    Hi suske,
    If you want a random day for a given month, this is how I would do it.
    Hope this helps,
    -D
    Message Edited by Darren on 02-02-2006 01:35 PM
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman
    Attachments:
    Days_per_month.jpg ‏32 KB

  • How to switch central frequency fastly with labview and USRP?

    Hello everybody,
             Recently I was making a frequency hopping receiver with labview and USRP N210 and SBX. The transmitter works on the 2.4G band, and it changes from one central frequency to another every 65536us. As I think, if I start receiving at the correct time, and  change the central frequency of the USRP every 65536us, I should be able to receive the data.
        But I find that, when usrp switch form one central frequency to a different one, it spends nearly 48ms and when it switch from one frequency to the same one, it only spends 3ms(I test the performance by modifying the niUSRP EX Rx Continuous Async Reconfig on the Fly.vi example). So if I want to follow the hopping sequency, I may can only receive 17ms data because I have to save time for switching central frequency. 
         My problem is that: why usrp changes central frequency so slow,  how can I make the process faster? If I want to follow the hopping sequency, can anybody give me some good advice? Thanks

    There is an attribute "LO Frequency" that you can use to lock down the frequency of the local oscillator.  Then, when you set the "Carrier Frequency" attribute, the difference between the carrier frequency value and the LO frequency value will be realized by frequency shift in the DSP in the FPGA.  Changing this "digital" frequency shift value is much faster, since you don't have to re-tune the local oscillator.
    Let's say you're sweeping from 2.44 GHz to 2.46 GHz.  Set the "LO Frequency" to 2.45 GHz then Commit.  Then, in your loop, program the "Carrier Frequency" attribute from 2.44 GHz to 2.46 GHz.  In the loop, it will only program the digital frequency shift, which will happen much faster.
    Another tip is to use the property node to program only the attributes you want to change, rather than the niUSRP Configure Signal.vi (which sets many at once).
    For more details, see the "Configuration:Advanced:LO Frequency Property" in the NI-USRP Help, and look at this example:
    <LabVIEW dir>\examples\instr\niUSRP\niUSRP EX Fine-Tune LO Frequency.vi

  • Can I interface a normal DC motor with a computer using LabView?

    I am trying to find a DC motor that can be interfaced with the computer using LabView. Is that possible? If so, HOW?

    There are many ways to control DC motors from LabVIEW. National Instruments provides plugin motion control boards like the PCI-7342 that are capable of controlling 2 to 8 stepper or servo motor (DC) axes. Additionally you need a drive for power amplification.
    You find lots of very good information about controlling motors from LabVIEW with NI motion control hardware under this link:
    http://www.ni.com/motion/
    The NI motion control boards have lots of high level features like position control, interpolation modes, contouring, onboard programming and so on. Your request is very brief so I can't tell if this level of control is oversized for your application or not. If you simply want to turn a DC motor on or off there will be cheaper methods to accomplish that.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • Interfacing Beckhoff EK1100 with LabVIEW without using any other hardware

    Hello All,
    I'm new to Beckhoff & I have EK1100 with EL2809 & EL3054. I want to interface with EK1100 with LabVIEW with PXI or cRio or any other hardware.
    Is there anyone who can explain how?
    I'm using the following sofwares & drivers.
    LabVIEW2012
    EtherCAT Acquisition Driver
    EtherCAT Acquisition Library for LabVIEW
    TwinCAT ADS Library v3.0.3
    Please suggest at the earliest.
    Regards'
    Love Diwan |+91-9810013576

    cross post
    Jesse Dennis
    Design Engineer
    Erdos Miller

  • How to calibrate analyseur HP 8753E with Labview??

    ghabri
    Envois : 1
    0 Compliments
    Driver instrument pour la calibration du HP8753E sous labview
    Driver instrument' for the calibration of HP8753E in labview
    Bonjour,
    Je suis entrain de développer une interface utilisateur sous labview 8,5 pour interfacer un analyseur de fréquence HP 8753E, j'ai pas pu trouver une solution (normalement avec les driver d'instrument) pour faire la calibration du l'analyseur (remarque la calibration peut se faire manuellement mais je doit le faire avec labview)
    j'espére que ma question est claire, merci de me répondre
    Cordialement
    Hello,
    I am currently developing a user interface in labview 8.5 to interface a frequency analyzer HP 8753E, I could not find a solution (normally with the instrument driver) to the calibration of the analyzer (note the calibration can be done manually but I must do with labview)
    I hope that my question is clear, thank you for answering me
    cordially

    duplicate post
    Please do not post the same question on multiple boards.

  • I want to interface third party/NI Webcam with Labview .

    In my application i want to interface 3 NI / Third party WEBCAMS on TCP/IP with Labview 8.6 on host PC having Windows XP OS.
    I am using Compact CRIO 9704 hardware with real time deployment module.
    For interfacing webcams which drivers i required? OR Any deployment module is available in NI?
    Please suggest.
    Thanks in Advance.
    Sachin

    Hi Sachin,
    These cameras will be interfaced throught ethernet or USB. Will they be connected to the PC running Win XP or are you looking to interface them with the cRIO.

Maybe you are looking for