How is 2 sided printing done with a Photosmart B210a?

Photosmart Plus B210a
Win 7-32 bit
no errors
no changes
General question for how to start a 2 sided print job. I don't seem to be able to locate the feature in the printer software.
Thanks

Hi,
I can NOT even find word duplex in its manual (c02456532.pdf).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Two-sided printing problem with a Photosmart 6510

I have a new Photosmart 6510 and it is supposed to come with automatic two-sided printing.
I have tried printing two-sided and followed the advice of many previous thread but it has not worked.
I am using a Mac OS X version 10.5.8 and Microsoft Word 2008.
When I go to the drop-down menu in the Print window and go to 'two-sided printing' the option to print both sides is greyed out, and it says that the paper type and size settings do not support two-sided printing. What size paper should I select and where can I do this?
Any help would be great.
Thank-you
This question was solved.
View Solution.

Hi,
Please try the following settings:
1.From the application used to print, click the File menu, then select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
2. To select the binding type click the lowest selection box listed as Copies & Pages.
3. Select Layout from the drop-down menu.
4. Set the Two-Sided option as Long-Edge binding.
If I'm not wrong, the duplexer support only A4 and Letter sizes
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know if you were able to successfully perform two-sided printing.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing Photos with the Photosmart B210a so they are not blurry and full of ink

I purchased the B210a to replace an older photosmart that just stopped printing. When the old printer did photos they were great. Had no trouble setting printet up to run on a wireless network and am using a computer with WINXP.
Photos that come out are grainy and full of ink, so much so that I get ink all over my hands. I have done all the things you usually do, clean printheads, checked the vents, align the printhead. No change in how the photo prints. Went out and bought HP advanced photo paper as all I had was photo paper for an epson picturemate. Nothing.
Everything else on the printer works fine, it prints great and the scanner works very well. The photos are a big disappointment. At this point I am debating contacting HP Support directly or just taking the thing back and getting a different printer. Printer is only about a week out of the box at this point.
Any help woud be greatly appreciated. I did find a thread about this but it was way too detailed and technical for me to follow all the steps the posted.
Any help would be greatly appreciated.
Dave Trott

We are having the exact same problem. I happened to have one sheet of HP paper (from an even older HP photo printer and it seemed to print just fine. So I think the Kodak stuff (I have a lot of it too) is just not compatible with the HP 6510. I'm going to get some other paper tomorrow and see what works.

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

How Can I Take Print Screen With in java Application

Hello Every One,
Hope U all r fine.
How can i take print screen with in java code,
Please Help me out

http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Btitle%3A%22print+screen%22&col=javaforums

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

Hello,
Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
If that does not help, let me know and I will see what I can do.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to do two sided printing automatically with HP 7520 printer

All that I am trying to do is to make my printer do two sided or double sided printing. No matter what I check IT DOES NOT WORK. I checked "2-sided, 1 to 2, NOTHING. What amazes me is that this worked until recently and now it just will not do double sided printing. I am probably doing something wrong, but WHAT?
This question was solved.
View Solution.

filgrastin
Generally speaking, duplex printing is accessed / adjusted from Printing Preferences.
If you are printing from within an application, for example, within Word or within your Browser, you might reach Printing Preferences from Print Preview.
Reference:
Manage Print Output with Print Preview
Excerpted:
Print Preview – Accessing the Printing Preferences
Browser Page > File > Print Preview > Properties
Properties Accesses Printing Preferences:
Paper Source (Tray Selection), Paper Size, Media, Orientation, Print on Both Sides, Page Order
Reference: Printing Preferences
================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Is two-sided printing possible with Keynote?

The power point slides for one of my classes opens in keynote so I have to print from there but my question is, is it possible to print on both sides when using keynote? When I go to print, and then the printing options I can see a two-sided printing option but for some reason I'm unable to click on it. I don't think its because of the printer I'm using because I've printed on both sides using Microsoft word with my printer before. I just can't seem to do it with keynote.
Should I just copy & paste to Pages to use two-sided printing?
Message was edited by: AshesAshes

I just checked any I can select two sided printing with my printer in Keynote, so I don't know why you wouldn't be able to if you have a printer that is capable of it.
But instead of copy and paste, I would export it as a .pdf (Share>Export>pdf) and then you can try to print two sided in Preview and if that doesn't work, then add the .pdf files to Pages and print.

Two-sided print don't work.

My 2610 Photosmart I think it don't have a duplex feature, but in Windows XP worked with a two-sided printed.
I can have it in 10.5 Leopard ? What can I do, because I use the setting two-sided printing and check print both sides, but nothing happens, it prints in two sheets of paper, even in queue saids that is printing 1 sheet of 1.
Can you tell me if in Leopard I need to buy a duplex printer to have it printed in both sides? I never need it in Windows XP, always printed in both sides when I wanted.

solv

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

HT1338 problems with Mac Book 10.7.5 printing wirelessly with HP Photosmart 6510e. I must turn off then turn back on for Mac to print.

HP Photosmart prints with PC, Droid phone but will only print wirelessly with MacBook OX 10.7.5 if I turn off printer and turn it back on. HP has tried, Belkin (router) has opened all ports, the problem persists.

That is great, but I recommend channel 11 instead of 10.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I patch print pictures with the filename?

I have 1000 student proof pictures to print on envelopes. one per envelope. I'm trying to figure out how to print the picture with the file name included. I need the file name printed under the picture so that when the students turn in their order
I can find their pictures. I've been doing a contact sheet of one coloumn and one row. this gets the name included with the picture, however, the system crashes if I try to do all 1000 at once. So I have to break it down into separate folders. I've found that if i try to this with more than
76 pictures photoshop freezes and I have to restart. There's got to be an easier way to do this. Please, help.

If you have InDesign, you could set up a data merge to do this.
Your data file would have one text column with the image name, and one image column (header beginning with '@)
Set up the first page and run the merge.

HT4356 How to make my printer compatible with my iPad 3

Hi , I have a Canon MG5250 printer that I want to make compatible with my iPad 3. Have heard I can do this with a plug in or an app,rather than having to buy another printer. Please can you help. Many Thanks.

How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to display the Print Dialog with defined print presets included.

When I try and display the Print Dialog none of my defined print presets are included in the print preset list box, I only get the [custom] option.
How can I get the presets included in the list?
The code I am using is:
InterfacePtr<IPrintData> docPrintData(document->GetDocWorkSpace(), UseDefaultIID());
// create a temp non-persistent IPrintData
IPrintData* tempPrintData(CreateObject2<IPrintData>(kPrintDataBoss));
// copy data from the document workspace
tempPrintData->CopyData(docPrintData, kTrue);
InterfacePtr<ICommand> printDialogCmd(CmdUtils::CreateCommand(kPrintDialogCmdBoss));
InterfacePtr<IPrintDialogCmdData> printDialogCmdData(printDialogCmd, IID_IPRINTDIALOGCMDDATA);
// store off the document's UIDRef in the print data boss
UIDRef docUIDRef = ::GetUIDRef(document);
printDialogCmdData->SetDocUIDRef(docUIDRef);
printDialogCmdData->SetPrintData(tempPrintData);
ErrorCode result = CmdUtils::ProcessCommand(printDialogCmd);
tempPrintData->Release();
Thanks

You can set the presets with Adobe Acrobat.

How do I do print screen with a Wireless keyboard (Fn+F11 wont work)

Please please please help me asap
I have Snow Leopard, and use Boot Camp with Win XP Home on. I have an Apple Wireless Keboard, how do I do a print screen please?
Tried Fn+F11 but it just does the sound down, tried FnShiftF11 same. Really frustrating....

Had to disable the Use Function keys as standard in boot camp control panel, and then used FnShiftF11

How is 2 sided printing done with a Photosmart B210a?

Similar Messages

Maybe you are looking for