How is ABAP Central Instance defined?
Hello,
upto WAS 6.40 the enqueue and message server defined the Central Instance (CI) of an ABAP stack. With the new architecture both services are moved to the ASCS ínstance, but the term CI still exists.
What exactly defines the CI in WAS 7.x ?
Regards BErnd
Hi ,
With SAP NetWeaver 04 Java, the Message Server and the Enqueue Server are separated from the Central Instance. These two services are grouped within the SAP Central Services Instance (SCS) as services. From NW04s the ABAP Central Services can be also separated from the Central Instance. Each stack, ABAP and Java, has its own Message Service and Enqueue Service. For ABAP systems the Central Services are referred to as ASCS, for Java systems the Central Services are referred to as SCS. The ASCS and the SCS are leveled as SPOF and require a High Availability Setup therefore. If the ASCS is integrated within the ABAP Central Instance (standard in NetWeaver 04) the Central Instance of the ABAP system needs a HA setup also.
Regards
Zia
Similar Messages
-
How to determine central instance
Dear all,
I have the instances as follows.
DEVBMGS00 for production.
DEVBMGS25 for development
DEVBMGS00 for Quality
Now my question is:
Can any1 tell me what is central instance how to determine the central instance out of the three?
<removed_by_moderator>
regards,
Ashutosh
Edited by: Julius Bussche on Jun 24, 2008 8:27 AMNo... you didn't understand...
You have 3 systems...
DEVBMGS00 for production.
DEVBMGS25 for development
DEVBMGS00 for Quality
each system has a central instance as each system needs to have an enque process for handling the locks on each individual database. in a system (say one of the three above) you can have more that one instance the central instance is the one that holds the enque process.
Regards
Juan -
How to retreive central instance name ?
I have a report that needs to be submitted only on the central instance using FM's Job_open', submit , and 'Job_close. The FM "Th_server_list" will give all the server names that are available, but i need to get the central instance. Are there any tables which stores these server names and a flag that indicates that it is a central instance...?? Any information is highly appreciated.
Thanks,
RKHello
I am not sure about your term "central instance". Based on your last posting I assume you are looking for a way to distinguish between DEV, QA and PRD (= central instance) system.
If this is the case then there is of course a way to distinguish these three systems provided the transport routes are properly defined (STMS).
Using fm TRINT_TCE_READ_CONFIG on our productive SAP-XI system it returns the following information:
ET_RELEASE: intsys = <DEV>, consys = <QA>
ET_DELIVER: fromsystem = <QA>, tosystem = <PRD>
You may give the fm a try in your system landscape.
Regards
Uwe -
How to Choose Central Instance?
Since iSetup is an EBS module and I don't want to lose any migration information due to a refresh of a production clone I would think that using the production EBS instance as the central instance would be the correct choice. But can anyone here provide some insight into this choice of central instance and the options?
Thank youNo... you didn't understand...
You have 3 systems...
DEVBMGS00 for production.
DEVBMGS25 for development
DEVBMGS00 for Quality
each system has a central instance as each system needs to have an enque process for handling the locks on each individual database. in a system (say one of the three above) you can have more that one instance the central instance is the one that holds the enque process.
Regards
Juan -
Central Instance in a Windows2008 MSCS with Oracle
Hello,
I have just finished the installation of a SAP Solution Manager with MSCS on Windows2008 and Oracle. This is my first MSCS, so I'm a little bit confused. I think almost all the things work right except the central instance. i explain:
I have the first node (node1) and the second node (node2) working fine. To check the MSCS installation, I shutdown node1 and make remote logon in node2 to see what's happening. And there are two remarkable things:
1.- Service/Instance SAP<SID>0 allways fails. If I startup it manually it works fine --> I suppose I have to add somewhere a retry after a delay.
2.- The central instance <hostname>20 doesn't exist in node2. So I cannot logon because there is no central instance. I only have the central instance in node1. I have read several times the documentation of the installation and I haven't found anything about installing the central instance in the additional MSCS node. It only says about the two options of the central instance installation: On a MSACS node or in a host outside MSCS (Not our case). Have I understood right?
Besides, I think the java instance is wrong too, I only have it in the first MSCS node.
Any help?
Thanks and best regards,
AnaHello Ana,
> 1.- Service/Instance SAP<SID>0 allways fails. If I startup it manually it works fine --> I suppose I have to add somewhere a retry after a delay.
check the property of SAP Service/Instance resource, under advanced tab, is "restart" option ticked with threshold and Period
defined. e.g threshold = 3, Period = 900 seconds
> 2.- The central instance <hostname>20 doesn't exist in node2. So I cannot logon because there is no central instance. I only have the central instance in node1. I have read several times the documentation of the installation and I haven't found anything about installing the central instance in the additional MSCS node. It only says about the two options of the central instance installation: On a MSACS node or in a host outside MSCS (Not our case). Have I understood right?
Your understanding is correct, The ABAP central instance (now without the message and enqueue servers) is generally installed locally on one of the cluster nodes with a second, identically configured dialog instance on the remaining cluster node. You can find more information in the installation guide.
As message server and enqueue is running on ASCS, the central instance is not required in order to logon to SAP system.
If you have issue logon to system when central instance is not running, please check you have at least one dialog instance started besides the ASCS instance.
Best regards,
Qingqing Wang -
Central instance error at "start instance" phase abap unknown...
hi there,
im installing central instance in mscs envi and im getting the error at "start instance" saying abap unknown.
below is the sapinst log can help pls
sapinst log
INFO 2008-01-25 15:39:30
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.1.xml'.
INFO 2008-01-25 15:39:30
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\inifile.xml.
INFO 2008-01-25 15:39:30
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.1.xml'.
INFO 2008-01-25 15:39:30
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:35
Execute step readProductXML of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Read_Product_XML|ind|ind|ind|ind|1|0.
WARNING 2008-01-25 15:39:35
The install parameter INSTPARA_DB is already defined (existing value IND, new value ORA ).
INFO 2008-01-25 15:39:35
Execute step checkRuntimeSystem of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step askStandardMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step syncKeydb of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.1.xml'.
INFO 2008-01-25 15:39:35
Execute step changeUserInstall of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\change.log.
INFO 2008-01-25 15:39:35
Output of change user /install is written to the logfile change.log.
WARNING 2008-01-25 15:39:35
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2008-01-25 15:39:35
Execute step chgautInstdirPublicAllOS4 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step replaceDLLs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/msvcp71.dll].
INFO 2008-01-25 15:39:35
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/msvcr71.dll].
INFO 2008-01-25 15:39:35
Execute step registerEventsDll of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step AddPrivileges of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ECO\Centiq' on host '.'.
INFO 2008-01-25 15:39:35
Execute step checkInstDirPermissions of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-25 15:39:35
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-25 15:39:36
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step sync of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step adminCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step W2KSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step XPSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:42
Execute step DNSCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:42
DNS is configured correctly.
INFO 2008-01-25 15:39:42
Execute step done of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:42
Execute step startDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:42
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:42 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:42 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:42
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-25 15:39:52
Copied file 'Z:/Java_comp/J2EE_OSINDEP/JDKVersion.xml' to '.'.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:52
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:52
Execute step getCD of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:52
Execute step verifyJavaHome of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:52 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:55 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:55 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.1.xml'.
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.2.xml'.
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.3.xml'.
INFO 2008-01-25 15:39:55
Execute step verifyPolicy of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:55
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck.
INFO 2008-01-25 15:39:55
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:55
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:39:55
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\local_policy.log.
INFO 2008-01-25 15:39:55
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile local_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/local_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_local.policy
INFO 2008-01-25 15:39:56
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:56
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:39:56
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\US_export_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile US_export_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/US_export_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_US_export.policy
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_local.policy.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_US_export.policy.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.DSA.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.SF.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.RSA.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.SF.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\MANIFEST.MF.
INFO 2008-01-25 15:39:56
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck/META-INF.
INFO 2008-01-25 15:39:56
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:56
Execute step setNWOption of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:56
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:39:56
Execute step collect of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:58
Found these instances:
sid: PPI, number: 00, name: ASCS00, host: sapxpi
sid: PPI, number: 01, name: SCS01, host: sapxpi
sid: PPI, number: 10, name: ERS10, host: s5
sid: PPI, number: 11, name: ERS11, host: s5
sid: PPI, number: 10, name: ERS10, host: s6
sid: PPI, number: 11, name: ERS11, host: s6
INFO 2008-01-25 15:39:58
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:58
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0|NW_getMounts|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:59
Execute step updateMountInfo of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:59
Execute step getProfileDir of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:40:48
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:40:49
Execute step isUnicodeFromStack of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:49
Execute step isUnicodeFromExecutables of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\msg_server.exe.log.
INFO 2008-01-25 15:40:50
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:40:50
Output of F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v is written to the logfile msg_server.exe.log.
INFO 2008-01-25 15:40:50
Execution of the command "F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v" finished with return code 0. Output:
msgserver information
kernel release 700
kernel make variant 700_REL
DBMS client library
compiled on NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 31 2006 20:13:01
update level 0
patch number 73
source id 0.075
supported environment
database (SAP, table SVERS) 700
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
msgserver patch information
( 0.001) MS: enable server shutdown (note 821875)
( 0.001) MS: dont bind external port for SCS instance (note 821875)
( 0.002) MS: new pseudo parameter rdisp/msserv_no (note 834052)
( 0.007) CST patch collection 21 2005 (note 845887)
( 0.011) CST patch collection 24 2005 (note 851195)
( 0.014) CST Patch Collection 28 2005 (note 860319)
( 0.018) CST Patch Collection 31 2005 (note 867690)
( 0.023) CST Patch Collection 36 2005 (note 874665)
( 0.023) CST Patch Collection 37 2005 (note 877058)
( 0.023) VMC Patch Collection 6 (note 865932)
( 0.026) CST Patch Collection 39 2005 (note 884266)
( 0.033) CST Patch Collection 45 2005 (note 895230)
( 0.034) J2EE engine can't reconnect (note 895230)
( 0.036) CST Patch Collection 49 2005 (note 904777)
( 0.046) CST Patch Collection 06 2006 (note 921223)
( 0.049) CST Patch Collection 09 2006 (note 928898)
( 0.050) Avoid deadlock in exception handler, when writing the stacktrace (note 907123)
( 0.053) CST Patch Collection 14 2006 (note 937223)
( 0.057) CST Patch Collection 17 2006 (note 944284)
( 0.060) CST Patch Collection 22 2006 (note 950845)
( 0.065) P4HTTP added as logon type (note 958374)
( 0.065) CST Patch Collection 26 2006 (note 957514)
( 0.069) CST Patch Collection 29 2006 (note 962917)
( 0.073) CST Patch Collection 33 2006 (note 970657)
INFO 2008-01-25 15:40:50
Execute step isUnicodeFromMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Execute step isUnicodeFromProfile of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Execute step askUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:51
Execute step checkMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Execute step askABAPMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Message server (sapxpi/3900) allows connections to its internal port from this host.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Execute step askJavaMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Message server (sapxpi/3901) allows connections to its internal port from this host.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Execute step getUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Execute step getMsPort of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Execute step getUnixIDs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:40:52
Execute step unpcackSECINSTTOOLS of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:40:52
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec.
INFO 2008-01-25 15:40:52
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/installsec.
INFO 2008-01-25 15:40:52
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:40:52
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\SECINSTTOOLS.log.
INFO 2008-01-25 15:40:52
Output of C:\DOCUME1\centiq\LOCALS1\Temp\2\sapinst_exe.3444.1201275543\SAPCAR.exe is written to the logfile SECINSTTOOLS.log.
INFO 2008-01-25 15:40:53
Output of C:\DOCUME1\centiq\LOCALS1\Temp\2\sapinst_exe.3444.1201275543\SAPCAR.exe -x -v -g -i -f Z:\BS2005\IM_WINDOWS_X86_64\COMMON\INSTALL\SECINSTTOOLS.SAR,:
SAPCAR: processing archive Z:/BS2005/IM_WINDOWS_X86_64/COMMON/INSTALL/SECINSTTOOLS.SAR (version 2.01)
x exception.jar
x logging.jar
x tc_sec_compat.jar
SAPCAR: 3 file(s) extracted
INFO 2008-01-25 15:40:53
Execute step askMasterPwd of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:05
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:05
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:05 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:05 PM Info: Called for user "DDIC"
Jan 25, 2008 3:41:05 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:05 PM Info: Performing check for username
Jan 25, 2008 3:41:05 PM Info: Performing check for password
Jan 25, 2008 3:41:05 PM Info: Operation executed successfully
Jan 25, 2008 3:41:05 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "SAPSTAR"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "J2EE_ADMIN"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "J2EE_GUEST"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "SAPJSF"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:07
Execute step askDomain of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:07
Execute step askPasswords of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:14
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step setInstallationLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step askSystemCopyLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step setLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step setInstallDB of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step fillDB6InitializeContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetDBUserParameter|ind|ind|ind|ind|5|0.
INFO 2008-01-25 15:41:16
Execute step sanityCheckAccounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:41:16
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillPRCContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillContextliveCache of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step loadUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|13|0.
INFO 2008-01-25 15:41:17
Execute step stopDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillContextUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0.
INFO 2008-01-25 15:41:17
Execute step setAllPossible of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.1.xml'.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.2.xml'.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.1.xml'.
INFO 2008-01-25 15:41:18
Execute step determineScenarioParameters of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Execute step prepareUsagesTableForUserInputXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Execute step determinePossibleUsageTypesXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Sofsap resolved it
-
How to install ECC 6 with Central Instance Only
How do I avoid install standard DB import because I want to use DB from another system, so I don't need to install DB import. But ECC 6, not like R/3 4.6C, I can't find a choice to install CI only, why?
Hi Dennis,
This is possible...From the Installation Master you have to select the Distributed System Option(SAP ERP 6.0 SR..->SAP System -> Distributed System - > Based On AS ABAP) not the Central System.There you can select the Database Instance/Central Instance.
Regards,
Sam -
How to add a java dialog instance to Java central instance of SAP CRM
Hi Gys,
I have installed a new dialog instance for the CRM Java landscape for the version 7.01 .
CRM Abap instance is seperate and its data accessed by Jco connection by central instance but not dialog instance . Could you please let me know if any configuration steps to be followed.
Thanks in advance
SudhakarCould you describe your problem a little bit more.
I have installed a new dialog instance for the CRM Java landscape for the version 7.01 .
CRM Abap instance is seperate
Ok, sounds like 2 Java instances and one ABAP instance.
and its data accessed by Jco connection by central instance but not dialog instance.
This is where I get confused.
Do you have one or more ABAP instances?
What is your actual problem (what do you want to do)? -
Why do need to install a Central Instance while installing WAS ABAP+Java :|
Hello all,
I've installed SAP WAS ABAP+Java 6.0 today.
In case of WAS ABAP+Java, there is one database but ABAP and Java have seperate schemas inside it.
Comparing the installation process with Installation of WAS Java (Java Stack/Engine only), wherein after installing few pre-reqisites like JDK, SQL Server (in my case) and then portal....I believe it created a schema for Java.
But in WAS ABAP+Java, what is the need to install a Central Instance first and then a database instance?
Awaiting Reply.
Thanks and Warm Regards,
Ritu R HunjanUPDATE... Gone onto the mac store today and now in the purchase tab Lion has been removed so looks like I have not even purchased it... I did a search for it in the store and instead of saying "Installed" - its giving me the selling price... Just like it does when you first purchase the software!!
What's going on?... HELP!!! -
Windows Central Instance ABAP+JAVA plus UNIX ABAP dialog instances ?
Hi everybody,
we are an SAP software partner and provide SAP complementary software on UNIX and Windows platforms.
Part of our software (a gateway) needs to be installed on the SAP application server.
In order to setup a cross-platform test environment for our developers, I was thinking about extending the existing SAP ERP 6.0 Windows-based Central Instance (IDES, Oracle, usage types ABAP+JAVA) by multiple ABAP dialog instances which run on different UNIX flavours (Solaris, AIX, Linux).
I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
SAP Note 1067221 however mentions that DIs on different OS platforms are only partly supported, but it seems this is only valid for JAVA DIs?
As I need only ABAP DIs, I hope my plans are fine?
Many thanks for your feedback
Markus> I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
Well - what is "usual" depends on the requirements
It's possible to do that. Technically there's no difference whether an application server is Unix or Windows based.
There are, however, a few things to take care of:
- if your system is non-Unicode, sorting algorithms are different on different platforms. Unicode systems use ICU which is cross-platform
- if you want to automatically distribute your kernel on system start you will need to create a "share" on the Windows machine and make it accessible from the various other platforms. You can, however, ensure "manually", that you use the same kernel patchlevels on all systems, then this is not needed
- Windows is LittleEndian whereas most Unix systems are BigEndian, depending on if you exchange data between those systems (means, binary data, files through NFS) the programs must be aware of the fact, that a file can be either LE or BE.
Markus -
Central instance error mscs abap unknown
Hi there,
Im having problem installing central instance in mscs environment with oracle database.
the error is at "start instance" phase and coming up as abap unknown and it is giving up after 10:30 mins
im attaching few error logs to help me out.
start<SID>
running
sapxpi\sapmnt\PPI\SYS\exe\uc\NTAMD64\sapstart.exe name=PPI nr=02 SAPDIAHOST=s5 -wait
SAPSTART finished successfully on s5_PPI_02, but at least one process doesn't run correctly:
sapxpi\sapmnt\PPI\SYS\exe\uc\NTAMD64\sapstart.exe=>sapparam(1c): No Profile used.
sapstartsrv
trc file: "sapstartsrv.log", trc level: 0, release: "700"
pid 1608
Sun Jan 27 17:14:06 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 114, changelist 911513' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_02
Webservice thread started, listening on port 50213
ECO\Centiq is stopping SAP System at 2008/01/27 17:27:21
SAP HA Trace: FindClusterResource: SAP resource not found [sapwinha.cpp, line 334]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_NOT_CLUSTERED [sapwinha.cpp, line 907]
ECO\Centiq is starting SAP System at 2008/01/27 17:27:55
sapstart
SAP-R/3-Startup Program
Starting at 2008/01/27 17:27:56
Startup Profile: "
sapxpi\sapmnt\PPI\SYS\profile\START_DVEBMGS02_s5"
Starting Programs
(3116) Execute: F:\usr\sap\PPI\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=
sapxpi\sapmnt\PPI\SYS\profile\PPI_DVEBMGS02_s5
(3204) Execute: F:\usr\sap\PPI\SYS\exe\uc\NTAMD64\strdbs.cmd PPI
sapinst
INFO 2008-01-28 09:36:56
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.4.xml'.
INFO 2008-01-28 09:36:56
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.5.xml'.
INFO 2008-01-28 09:36:58
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-28 09:37:04
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.3.xml'.
INFO 2008-01-28 09:37:04
Execute step start of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0.
INFO 2008-01-28 09:37:04
Starting instance PPI/ASCS00...
INFO 2008-01-28 09:37:04
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:04
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:04
Starting instance PPI/DVEBMGS02...
INFO 2008-01-28 09:37:05
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:05
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:05
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:05
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-28 09:37:05
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\stop_PPI_DVEBMGS02.log.
INFO 2008-01-28 09:37:07
Output of
sapxpi\sapmnt\PPI\SYS\exe\uc\NTAMD64\stopsap.exe name=PPI nr=02 SAPDIAHOST=s5 is written to the logfile stop_PPI_DVEBMGS02.log.
Regards
Raj
Edited by: raj p on Jan 30, 2008 10:37 AMhi ..they have commented two lines in "start abap database" in central instance start profile
DB = $d(DIRCT_RUN)\STRDBS.CMD
START_PROGRAM_01 = IMMEDIATE $(-DB)<SID>
Edited by: raj p on Feb 13, 2008 9:20 AM -
How to make upgrade from application server and not from central instance?
Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori -
BRFplus: How to create an instance of User-Defined Expression Type?
Hi,
I've created an expression type in a System Application and marked its Access Level as Global. I've created a Class & Interface and assigned it to my Expression Type, and activated it successfully.
Now how do use this Expression Type to create expression in my Customizing Applications?
Do I have to make any more code changes like extending any more classes or implementing additional interfaces? (I've already created a dummy Query Class and UI class)
Any documentation or example of how to create a user-defined Expression Type and how to use them will be very helpful for me.
Thank you & Best RegardsWell I was going through the PDF documents available on SDN. I came across a document which referred to a document on creating user-defined expression.
Document Name: [BRFplus XML Export and Import|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20462066-a086-2d10-a999-c9075767ce48?quicklink=index&overridelayout=true].
The code sample for creating user-defined expression types is available in the How to Create Custom Expression Types document
Pg. 24
I had a hard time looking for that document. Couldn't find it though.
Thank you Mr. Ziegler, now I know that currently there isn't any documentation on User-Defined Expression Types. I'll be awaiting for your document on this
Any overview about the steps to be followed in creating a custom expression type, with a few simple steps on how to do it over here would be greatly appreciated. Especially on how to get it seen in the Create Expression Sub-Menu. Also do I have to code a web dynpro for the UI?
Thank you & Best Regards. -
Error in Central Instance installation ERP 2005 Distributed System
Hi All,
I am currently trying to install Central Instance for ABAP Distributed system on AIX.
During the installation I encounter this error message:
WARNING 2006-09-20 14:22:39
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2006-09-20 14:22:39
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS-ABAP/CI/FormalPasswordCheck.log.
ERROR 2006-09-20 14:22:39
FSL-04008 Unable to access application bin/java. A file or directory in the path name does not exist.
Before the installation SAPINST_JRE_HOME and JAVA_HOME variables were set to /usr/java14.
Please help.
Thanks,
ChieHi Chie,
definately wrong
the output should be similar to this one:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (SAP 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
note the "64 bit" and "SAP" in there...
You can download it here:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=javasap
Regards,
Pascal
PS: please give points for helpful answers -
Java Add-in Installation of the Central instance installation
I'm trying to re-install the Java Add-in Central Instance for ABAP.
During the installation of Java Engine, i met the error on SecureStore step.
In the LOG:
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> A key/value pair with this key already exists in the store.
I had the right roles at the user SAPJSF.
I have also renamed the files in /usr/sap/MWF/SYS/global/security/data
SecStore.key
SecStore.properties
..and i receive the following:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
com.sap.security.core.server.secstorefs.FileMissingException: File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
If i rename only the SecStore.key in SecStore.key.old, i will receive the following:
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> Warning: this command line user interface is meant as a last resort if
>> everything else fails.
>> The key phrase that you must type in now will be visible on the screen!
I've also lunched the following command from the opreating system level:
/usr/java14_64/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib/launcher.jar -Xmx256m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /usr/sap/MWF/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/MWF/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib:/usr/opt/db2_08_01/java//db2jcc.jar:/usr/opt/db2_08_01/java//db2jcc_license_cisuz.jar insert -s MWF -f /usr/sap/MWF/SYS/global/security/data/SecStore.properties -k /sapmnt/MWF/global/security/data/SecStore.key admin/host/MWF
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> Usage:
>> SecStoreFS status <standard>
>> SecStoreFS exists <standard>
>> SecStoreFS create <standard> -noenc
>> SecStoreFS create <standard> -enc -p "<key phrase>" [-nostore]
>> SecStoreFS insert <standard> <key> <value>
>> SecStoreFS encrypt <standard> -p "<key phrase>" [-nostore]
>> SecStoreFS updatep <standard> -p "<key phrase>" [-nostore]
>>where <standard> is [-s <SID>] [-f <data filename> -k <key filename>]
>> No value given!
Anybody knows how is possible to follow with the installation?
Best Regards.Dear Kumar,
referring to the note 1063396, i haven't got "iaik_jce_export.jar" file in the directory specifed in the note.
So, i've just renamed the following files
SecStore.key
SecStore.properties
NOTHING DIFFERENT.
To be sure, i have also renamed the directory /sapmnt/MWF/global/security/data --> data.old
You can see the result on the following log:
>>/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI#cat SecureStoreInsert.log
>>SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>>
>>com.sap.security.core.server.secstorefs.FileMissingException: >>File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
>> at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
>> at java.lang.reflect.Method.invoke(Method.java:391)
>> at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Do you have any idea to solve the problem and to start teh installation again?
Best regards.
Maybe you are looking for
-
Create pdf files with broadcaster
Dear experts, I want to create a pdf file using a broadcaster setting. The pdf will be viewed on the user's client pc and after that be printed on a chosen printer. From all that I've read so far this should be possible. When I try to configure a bro
-
Can't get Quicktime videos to play once uploaded - using iWeb 08
Please help. I just updated my work website and uploaded a few quicktime videos of my TV spots. These same spots were uploaded and played fine on my last website update last year. But this time around, they're not working so well. Once uploaded, if y
-
FRM-41076 Error populating Group in form 10g
I have a record group that i called in WNFI trigger PROCEDURE POPULATE_DYNAMIC_LIST IS /* Read each lists values from its record group and populate the list */ temp NUMBER; /* Return value of populate_group call */ rg_id RecordGroup; /* Return value
-
I choose my homepage but it won't stay that it goes to a default i-mesh homepage how do I resolve
How do I keep one homepage that I choose?
-
Sd card wont read after android update
Same issue as others already posted. Updated android 4.1.1 on my slate 7 yesterday. Micro sd card no longer reads. No error message but external storage does not read at all. Also, Spotify app does not run now, possibly other apps too - not yet teste