How is batch determined in sap mm?

Pls. help me giving the answer batch determination procedure in sap mm...

Please check these answered links:
batch determination
batch determination
Batch determination
Batch Determination
Edited by: Afshad Irani on Jun 21, 2010 9:48 AM

Similar Messages

How can I determine batches while picking in transaction VL02N?

Hi all, good day.
I would appreciate your suggestions.
I'm developing some RF Transactions and at this point I have to solve the following:
The program process data which the user enters using a handheld; values are send
to the transaction VL02N, using a call transaction technique, for batch split creation
and picking items of a Delivery.
The first point is that when batch is readed from a label it must be validated in the code,
How can I get the batches from the system? I need a function for batch determination.
Besides the second point is if is a good idea to use the call transaction technique,
With which standard funtion could I do the same?
I appreciate so much your support.
Thanks in advance.
Idulio

hi ,
why do u check with BAPIs, find out relavent BAPI to create deliveries , So post /put data into BAPI and SAP will take care of every thing ( like batch deternminations , based on the Config ) .
if u want more just drop a mail , i will revert back if possible
regards
Prabhu
[email protected]

How to exclude restricted-use batch from batch-determination in backflushin

Hello,
In the Goods-Movement screen during confirmation transaction (i.e. backflushing), we see that SAP has selected some batches that are restricted-use stock. This must be due to some setting in batch-determination functionality. We want to know how to exclude restricted-use stocks from being considered in batch-determination. What setting, in which config transaction, can help us achieve this ? Kindly help. Thanks.
- Chetan

Thanks Manoj,
That was a very good information and I learnt something new.
However, I checked, and in that config, we are already "not-allowing" restricted-use stock for MvT-261. So what else can be used to prohibit its selection during backflushing. Thanks.
- Chetan

How to automatically determine batch no. of component in Production Order

Hi PP gurus:
I am facing a issue. A finished goods with a raw material which under batch management, what I want is when I release the production order of the finished goods, SAP can automatically determine the batch no. of the raw material according to the presetted rule without hitting the "Batch Determination" button in the component tab.
Who can throw a light to me?
Thank you very much.
Paul

Hi,
To manage the materail in batches first you have to check the batch management indicator during the matreial creation in purchasing view or plandata/stor1 view .
Next you have to set the value of batch entry in MRP-2 view for Determination of batch entry in the production/process order
This indicator refers to the components of an order, not to the finished product to be manufactured. You have the following options:
The batches can be determined when the goods issue is posted.
The batches must be entered in the order before it is released.
The batches must be entered in the order before the goods issue is posted, but not necessarily before the order is released.
If you use pick parts, the batches are determined in the transfer order and then confirmed to the order. If there is no direct link between the transfer order and the production order/process order (for example, with release order parts or crate parts), you must enter the batches in the production order/process order manually.
The batches are determined automatically when the order is released.
Hope clear to you.
Regards,
R.Brahmankar

In backflushing, how to get batch determination for IM managed components.

Hello friends,
During confirmation, in Goods Movements screen, we get auto batch determination for WM managed components (based on their control cycle record). However, we are NOT getting auto batch determination for IM managed components.
We have created batch selection/sort, and search strategy for Orders as well as Inventory Management. We have also created condition records for the above IM managed components. But still auto batch determination does not take place.
Kindly help how to get auto batch determination of IM managed components during confirmation. Thanks.
- Chetan

Hi Tajuddin, Prashob,
I marked my query as "solved", but I need one clarification please:
OSPX is a pre-requisite config to OPJ2. In OSPX, we have selection for "sorting" by Item-Table, Price, & Quantity. Can you please briefly explain how these 3 sorting is supposed to work ? Thanks.
- Chetan

How to batch upload some data into SAP system?

Hi All:
I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
Thanks in advance!

Hi,
I think at least there are four methods for batch input which you can use in SAP system:
Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
So you had better contact your SAP support department, help you to upload data!
Good luck
Tao

How to change account determination in sap asset accounting when there is a

Dear experts,
how to change account determination in sap asset accounting when there is a posting in previous one.
thanks in advance
Deboleena Ganguly

HI:
You can easily change the account determination of asset class . There is an OSS note regarding the correction of issue which you will face while changing account determination for which there are already posted fixed assets
Error message AC476 upon change of account in AO90 can be customized now
via transactions OBMSG...Application Area-AC
Note 202746
Under certain circumstances, it may still be necessary to make a change
to this account.By implementing this note, the above error message is
replaced by a warning message.Following account maintenance, you may
need to carry out manual intracompany transfers in FI in accordance with
Note 69225.
Regards
Edited by: Atif Farooq on Oct 31, 2011 11:44 AM

How to trun off batch determination for certain shipping points ?

During Delivery Notes creation we would like to turn off the batch determination on basis of certail shipping points. can some please guide what is the best way to do it. We do not want it turned off for all the shipping points but for a special ones.
The idea is when we create Delivey for certain shipping point we do not need to fill in the batch code and yets save, pick confim, goods issue during delivery creation process....
we have sepcial shipping points for consignment process and for them we need to skip the batch determination......
Thanks in advance
Rajey

I don;t think you can control based on shipping point because batch creation is controlled at movement type level

How to make the batch determination process automatic

hi
ive maintainde my raw material for batch determination. but the thing is. when i create a production order.
the material with batch is not pulling out batch automatically.i ahve to select the material and go to the bottom if the screena and select the batch determination. then its working.
can i automate this.
i mean when i create a production order.it automatically pulls out a batch. with out me doing the batch determination.

Dear deepu,
to do automatic batch determination set the Batch Entry field in material master to 3 for all batch manged materials. After this create and release the order, system will determine the batches automaticaly. Since u r alreeady using manual determination all other settings remain same. Just u need to change in material master
sree

Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order. Can you pl. tell me how to configure this scenario.
Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

Hi,
Automatic Batch Determination for production order components is possible by configuration.
You can also refer below discussions to map your scenario.
Batch determination in production order | SCN
Automatic Batch Determination in Production order
Regards,
Naresh

Batch determination at sales order level

Dear All,
We are using my sap erp ecc 6.0.We are using the batch determination at sales order level.We had a problem whenever customer requested deliver date is beyond the RLT date then all the old batches which are already assigned and dispatched with some other sales order,that old batches are becoming filled with 999,999,999....(infinity stock).And at the same time it is determining the batch for the sales order line item.
please help how to stop the old batches filling up with infinity stock.
regards,
Hari

please look into this and throw some light.
regards,
Hari

Batch Determination With out characteristics ..?

Dear Experts
I have finished the batch determination for the SLED but i had to create characteristics for it refrence to VFDAT field in MCHA table
but I need to knowhow to refer direct to the field with out refering to the characteristics
for example I need to create a batch determination for the creation date of the batch so I want to refer direct to the field ERSDA in table MCHA .. I don't want the user to enter while doing a GR to enter the creation date of the batch in the classification of the batch
If its not possible to do such a thing .. so how can I make the characteristics which will hold the creation date of the batch to get the date in field ERSDA automatic
Best Regards
Edited by: Sap Sap on Jul 19, 2009 10:42 AM

Are you using a separate batch selection class versus the batch class?
There are characteristics that must be in the selection class, but cannot be in the batch class.
See OSS note 33396.
1. If you want to search for batches on the basis of a remaining shelf
         life in batch determination, the system has to calculate a requested
         shelf life expiration date dynamically from the information you
         give.
     2. Add characteristic LOBM_VFDAT to the batch classes.
         For the revaluation of reference characteristics, refer to Note
         78235.
         Characteristics LOBM_RLZ and LOBM_LFDAT must not be included in the
         batch classes!
     3. Add characteristics LOBM_VFDAT, LOBM_LFDAT, and LOBM_RLZ to the
         selection classes.
         Maintain a remaining shelf life in the strategy records for batch
         determination. Relational operators (> , < , <= , >=) are considered
         in the dynamic calculation of the shelf life expiration date in
         batch determination.
From your note you have placed LOBM_RLZ and LOBM_LFDAT in your batch class. You cannot do that.
FF

Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Automatic Batch Determination during Goods issue of Production Order

Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
Enrico

Dear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

Batch determination During Goods Issue

Greetings..
How to Active batch Determination WHile issuing the goods to Production.
I created Class and charachteristics. and assigned to materialmaster .
Now at the time issue i need that the system should ask the to check the Batch available in Stock with ther Shelf Life..as my charecteristics is shelf Life
How to do this bathc Determination.
Please GUide me with the Steps to be caried Out.
Thanks In advance...
Edited by: SAP PP on Apr 13, 2009 10:57 AM

Hi,
You can activate batch determination on the base of Goods Movement:
Batch Determination Process
Purpose
This process describes how you find suitable batches for a business transaction.Here are some examples of business transactions in different applications:
Business Transaction Application
Material withdrawal for production/process order
Internal material provision
Return delivery to supplier
Scrap/sample
Transfer posting
To configure this ,please find the details below:
Prerequisites
u2022 You must have assigned a search procedure to the business transaction. The search
procedure contains different strategy types that are relevant for the business transaction.
u2022 There must be a batch search strategy for one of the strategy types. See also Creating a
Batch Search Strategy
u2022 The selection class must contain at least one of the characteristics with which the batch
was classified.
Thanks,
AMIT
Logistics - General----> Batch Management -
> Batch Valuation -
>Valuation for Goods Movement in Inventory Management -
> Activate Batch Classification for Goods Movements in IM

How is batch determined in sap mm?

Similar Messages

Maybe you are looking for