How is functional location linked with work order tables

Hi, Experts:
I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
Many Thanks,
Jenny

Hi, Thyagarajan:
Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
Any suggestions?
Thanks,
Jenny

Similar Messages

Listing of Functional Locations in a Heirarchical Order in PM module

Hi Gurus ,
                 I am working on a requirement to display the Functional Locations in a heirarchical order for a given input Functional Location from table IFLOT. This is to be done by selecting all functional locations with the same String Indicator and the next lower heirarchy level for a given functional location.
    The above procedure is to be done upto 2 levels.
For eg .
Input given: AA (Functional location with heirarchy XX-NN-XX)
Then , my report should display
Level 2      Level 3
AA-22       AA-22-BB
Kindly provide me some useful tips .
Regards,
Venkatesh.

Hi,
When you are fetching the data from IFLOT
first table TNAPR field.
For each TNAPR you have to check Superior FL(TPLMA) field repeatedly till all the below levels have been fetched.
So the IFLOT select should be in a loop pass.
After fetching all the Levels of Values for FL, then you can put them in a string by concatenating as per your requirement and display.
Regards,
Anji

How to make email link with a button with AC2 in flash cs3?

How to make email link with a button with AC2 in flash cs3?
I wrote this, but it does not work:
btn_emailinfo.on (release) {
getURL("mailto:"[email protected]");
}

I am guessing you put that on a frame?
If so, the syntax is as follows:
btn_emailinfo.onRelease = function(){
getURL("mailto:[email protected]");
Though, if you are placing it directly on the button itself,
the syntax is:
on(release){
getURL("mailto:[email protected]");
}

Purchase requistion number and line item number linkage with work order opr

Hello,
I want to know what is the link between Purchase requisition number along with its line item number with work order operation number.
For the non stock component assign to Work order operation ( say operation 10) the PR get generated for that component which assign to that operation .
in which table we can find that PR as input and output as Work order number along with its operation .
In AFVC table if we put PR as input then it does not show any entry for that PR number?
Regards
Vaibhav

HI Vaibhav,
If you have the Work Order Number AUFNR, then you can get AUFPL from AFKO.
Then Pass AUFPL to AFVC table to get BANFN(Purchase requisition number) and BNFPO(Item number of the purchase requisition in the order).
Regards,
Ravi

How to add a Link with children in the SuiteLink bar?

Hello,
I have developed a code to add a new link in the SuiteLink bar using delegate control that works as expected. Now I want to include a new link
but with children, I have tried many options in my code but with not luck.
What I need in the SuiteLink bar is something like:
My Services   Newsfeed OneDrive Sites
    Service 1
    Service 2
    Service 3
Any idea on how to achieve this?
Thanks,
Daniel
Daniel Villacis

Hi,
According to your post, my understanding is that you want to add sublink in the top navigation bar.
There is an article about this issue, it contains the steps about how to create a link with sublink in the top navigation bar, you can have a look at it.
http://www.helpmeonsharepoint.com/2012/03/custom-sharepoint-top-menu-and.html
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to block material issue to work order

Dear Expert,
How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
Please help

Hi,
Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
Please help.

IH01 Functional location structure list of orders

Hello experts,
Do you know how to change the variant when you want to select orders from IH01?
Example
you open IH01 and click somewher on the structure, then you click environment- orders. The system leads you to the selection screen "functional location structure list of orders" here some selection fields are already filled. Such as period and also the status of the orders has already a flag.
Do you know how to change this?
I already saved User variants --> this does not help and also a SAP_TCODE_IW39 Variant.
Do you know how to change the period of time for the selection?
Thanx
Christiane

>
R Brahmankar wrote:
> Dear,
>
> Please sent me screen shot of same.
hello brahmankar,
i have send you the email havin Subj. line "REFRESH button in Transaction IH01 (functional location structure list) ."
Awaiting for you proper response..

Printing Attachments along with Work Order

Hi Friends,
My client has a requirement that the attach a external document (DOC, PDF, XLS) to a work order and wants this document to print automatically along with work order printing.
How to set this in SAP?

Nilesh,
Can you please tell how this issue was resolved for the benefit of others as well. We currently have a requirements where we need to print attachments along with a WO.
Thanks in advance.
Mahesh.

How do I locate friends with iphones?

How do I locate friends with iphones?

Find My Friends. If it's not pre-installed, then you can download it from the iTunes Store.

I reset my iphone 3gs bt have no backup. how to i get it to working order again because its now displaying the apple logo only

i reset my iphone 3gs bt have no backup. how to i get it to working order again because its now displaying the apple logo only

http://support.apple.com/kb/HT1808

DMS: Object Links for Work Order

Hello All,
I would like to attach and checkin originals to a work order thru CV01N/CV02N transaction. But, there is no specific tab for work oder. How do I acheive this?
what configuaration and development has to be done?
Any kind of help is highly appreciated.
Thanks,
Chandra

Hi,
If you need only a tab to be seen in the CV01N/CV02N Tcodes, then there is a config settings,
Document Mangement--> Control Data->Define Document Types (under that select your document type to which this attachment is required) > Define object links> select the production order (PORDER---Object & Screen # 0251)
then you can see the production order tab in the DIR,
OR
As per my understanding of your requirement is:
When you attach a Original in DIR then it should be visible in the Production order also.
To achieve this you need to build a relation b/w Material Master & DIR (particular document type), so when a order is created then DIR with original will also get attached automatically so that you view, or through EWB also it can viewed & edited.
Hope i have understand correctly.
Regards
Rehman

Attachment printing along with Work order

Hi all,
i used search functionality..but I couldn't able to find any solution to solve my issue.
I have one requirement with my client...
They attach some documents(Picture or word docs etc...) to Maintenance order through attachment funtionality whcih is available in the left side of the screen on the top.
This attachments they want print automatically along with Maintenance order when ever they want.
Any one come across with these kind of requirement...pls through some ideas on this.
Will award good points for solution

Hi,
This will be a custom development (telling windows to print a document). In the past I created this based on SAP DMS, but the same can be done based on the object linking you mention.
Please take care that this will not work properly with background processes. Also windows printer can be different from the SAP printer.
Regards,
Paul

How to update Serial Number from Work Order to Sales order in MTO flow

Helo Experts,
I have a requirement to update automatically the Serial number in Make to Order flow, from the Work order to the sales order and then to delivery.
In fact the flow is the following, when raising the sales order we don't know the SN, it will create a Work order with stock type E, when work order is released a Serial Number is assigned to the material created. After Goods receipt of WO, We need to have the SN updated in the sales order and then in the delivery.
I tried with the parameters of Serial number profile, i was not able to update from WO to Sales Order.
DO you have any idea how this requirement could be fullfiled? is it possible in standard?
Thanks

I don't think that it is possible in standard.

How to determine the Installation after Work Order installs a new meter

Hi IS-U Experts,
I have a question about the integration of Work Orders and Installation of Devices as it relates to IS-U data.
Our understanding of a Meter (Installation) process is as follows:
1. A Work (Service) Order is generated by CS (or a Sales) process. At minimum, the Device Location (ES65) and the Device Category (Material) needs to be provided for.
2. A techniciation executes the Work Order to install the meter. After which, this work is confirmed (IW42) and a Goods Issue is done on installed Device. In our case, the technician decides actual Device Number based on his/her vehicle stock.
3. Now, we want execute the IS-U Device Installation (EG31). However, we don't know where to draw the IS-U Installation from. There is no IS-U specific reference on the Work Order for the Installation. (It would be nice if the Order Type had an IS-U releavant screen category (table TQBT) for such a reference).
We could create the Installation on the fly, but we need the IS-U Premise (ES60). Our expection, anyway, is to build IS-U data
prior to the Work Order execution as part of the CS process. We defer IS-U Installation only because the device number is determined at the time of installation.
How should the IS-U context data passed around in the Work Order?
Thanks, Ed

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

Create a Link between Work Order and Reapir Order

IREAPIRORDER is the reapir order(IW54)
AUFNR is the work order (IW31)
w_relation = 'VONA'.
fs_obj_rolea-objtype = 'BUS2032'.
fs_obj_rolea-objkey = REAPIRORDER.
fs_obj_roleb-objtype = 'BUS2007'.
fs_obj_roleb-objkey = AUFNR.
CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
EXPORTING
obj_rolea = fs_obj_rolea
obj_roleb = fs_obj_roleb
relationtype = w_relation
IMPORTING
binrel = fs_binrel
TABLES
BINREL_ATTRIB =
EXCEPTIONS
no_model = 1
internal_error = 2
unknown = 3
OTHERS = 4.
CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
EXPORTING
obj_rolea = fs_obj_roleb
obj_roleb = fs_obj_rolea
relationtype = w_relation
IMPORTING
binrel = fs_binrel
TABLES
BINREL_ATTRIB =
EXCEPTIONS
no_model = 1
internal_error = 2
unknown = 3
OTHERS = 4.
The link is not getting created

Please go through this link:
/people/rammanohar.tiwari/blog/2005/10/10/generic-object-services-gos--in-background
Please give me reward points
Thanks
Murali Poli

How is functional location linked with work order tables

Similar Messages

Maybe you are looking for