How is it done...?

Hello, All :) ...There used to be an engine for 3D Flash
Development, called 3D Groove. It allowed developers that had
access to it, to create serious 3D games for the web, like AlienX:
Link to
AlienX
But unfortunately, only members of the 3D Groove Alliance
could use it. The project died, and the engine to the best of my
knowledge will never be licensable.
AlienX, and the engine behind it, this is what I would like
to do in Flex. Years ago, using Flash MX, Discreet Plasma, and the
Havok physics control, developers could use these tools to create
serious 3D games for the web.
Unfortunately, to the best of my knowledge Plasma is no
longer available, nor is the Havok physics control.
Does anybody know what the current tools are, for Flex, for
creating 3D Flash Content, such as AlienX? Especially, tools and
components that can read data from databases?
Thanx very much in advance for anyone who replies...
Deck

Test reply...

Similar Messages

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara

HT201493 My Wife and I share the same email address but each has an IPhone. We would like to have both of us individually on find friends but cannot do it via the email route. how is it done?

My wife and I share the same email address but have separate IPhones. We would like to have each phone individually on "find friends" but cannot do it via email route. How is it done?

make seperate appleID's if you wish to be frinds or if you wish to facetime video chat and if you wish to not recieve the samme imessage msg's unless you turn it off
you can still set both your iphones to use an email address even if both have different appleId's
the appleID is a handle not a link to an email address

I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done?

I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.

I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.

I want to use my 5 GB of storage in iCloud to back up certain data on my MacBook Pro. Is this possible? If so, how is it done from my MacBook Pro?

I want to use my 5 GB of storage in iCloud to back up the documents on my MacBook Pro. Is this possible? If so, how is it done from my MacBook Pro? I can't find an upload method.

Clear instructions here:
http://www.apple.com/icloud/setup/mac.html

I want to load my emails from an old mac to a newer imac? How is this done?

I want to load my emails from an old G5 mac to a newer I-mac? How is this done?

Are you positive the old iMac is a G5, please click about this Mac and tell us what CPU it has.
This article will help you get started https://discussions.apple.com/docs/DOC-2295

I made a photo book in iPhoto and would like to transfer the book to my iPhoto on other macs and iPad. How is this done and can it be synced between devices like photo stream.

I made a photo book in iPhoto and would like to transfer the book to my iPhoto on other macs and iPad. How is this done and can it be synced between devices like photo stream?

You can create a Quicktime movie slideshow of the book's pages and share that. Here's how to get your book into an iPhoto slideshow and then export as a Quicktime video:
1 - While viewing the book type Command+P to start the print process.
2 - click on the PDF button and select "Save PDF to iPhoto".
Note: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 200 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
3 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
4 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. Immediately select all of the photos in the new album and sequentially renumber them as "Page " using the Batch Change ➙ Title to Text with the option to add a sequential number to each title. This is to let you put the pages back in the correct order in the event they get sorted incorrectly.
Now you can proceed as follows: create the slideshow in iPhoto and export it out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large (480p with iPhoto 9),
Happy New Year

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

You can store your iTunes library on a Time Capsule. So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).
If you do decide to put your libray on Time Capsule I'd recommend doing this.
Option 1:
1. Don't use TC as a Backup (Time Machine).
2. Connect a USB drive to your TC or Computer and backup to the drive. Backup when a change is made to the library (adding Apps, Songs you get the idea).
Option 2: (What Im doing)
1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
2.   Use TC1 as a Time Machine backup
3.   Use TC2 as network drive. (The information on TC2 does NOT get backed up to TC1).
3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD. I've been doing the or some time now. Or connect to your TC and do an archive.
I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection. It's expensive, but does exactly what I expect.
The most important thing is to safe guard your data in case of a failure.
In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM. What ever you decide to do make sure you have a GOOD duplicate (backup).

READER IX opening equipment PDF to perform an internal Word SEARCH. How is this done?

Using Reader IX to open a Service Manual and then a Word SEARCH. How is this done?

thanks....
In a message dated 8/17/2014 9:00:29 P.M. Pacific Daylight Time,
[email protected] writes:
READER IX opening equipment PDF to perform an internal Word SEARCH. How is
this done?
created by ashutoshmehra (https://forums.adobe.com/people/ashutoshmehra)
in Adobe Reader - View the full discussion
(https://forums.adobe.com/message/6649441#6649441)

I'm sorry to bother you guys, but this is all new to me! i'm wanting to place my face on another persons photo as a gag. i've been struggling with this all day! could someone explain to me how this is done, in language i can understand??? thanks in advan

I'm really sorry to bother you guys, but this is all new to me! i'm trying to put my face on another persons photo as a gag! i have been struggling with this all day! can anyone explain to me how this is done in language i can understand??? thanks in advance!

What software do you own? Give details, please.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
It's not something you can learn in a forum, question by question. Teaching someone Photoshop from scratch exceeds the scope of this or any other forum.
The process involves isolating your face, by selecting it and deleting the unwanted parts around your face or with layer masks, then placing it as a new layer on top of your target image, making sure it's the right size, color, lighting, etc. Google for tutorials on any of those elements you are unfamiliar with,

HT1665 I am trying to connect my Samsung Bluetooth device with my new Iphone 4S. Can anyone explain how this is done?

I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?

Which Samsung Bluetooth device?
Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer.

How was this done - movable shape that changes percentage

I saw a presentation that had a pointer that the user could smoothly drag along a horizontal line, and when moving the pointer, the percentage underneath the pointer automatically changed. The pointer can be moved horizontally along the line, but cannot be moved vertically.
How was this done --- Is this something that can be accomplished in Captivate, or was it done in another program and inserted into Captivate? See two examples below.

AFAIK this can be done in Captivate, if you include some widgets (thinking about the Slider component widget of InfoSemantics). But widgets are not compatible with HTML5 output.
For HTML5, Edge Animate could produce that kind of interactivity as well, and you can embed an OAM package in Captivate, using the App packager in CP7, and right away in CP8.
Lilybiri

Image for div border, how is it done?

I've seen this on some sites, where instead of a dashed or
solid line, there is an image. Sometimes it's a gradient or
something similar that runs down the side of the div containing the
content of the page. I'd like to do this on one of my sites. How is
it done?
Thanks.

BruceCSI2 wrote:
> I've seen this on some sites, where instead of a dashed
or solid line, there is
> an image. Sometimes it's a gradient or something similar
that runs down the
> side of the div containing the content of the page. I'd
like to do this on one
> of my sites. How is it done?
> Thanks.
>
Its just a repeating background image attached to a container
that is
slighlty larger than the container within it.
In the case of the html/css below create an image 760px wide
then create
a shadow effect which occupies 40px at either end of it, fill
in the
680px center section in white. Save the image into a folder
named
'images' in your site root folder. Copy and paste the code
below into a
new DW document, save it to your site root folder then you
should see
the shadow effect running down both sides of the outerWrapper
<div>. If
not you've done something wrong or my instructions aren't
clear enough.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Untitled Document</title>
<style type="text/css">
#outerWrapper {
width: 760px;
margin: 0 auto;
background-image: url(images/shadow.jpg);
background-repeat: repeat-y;
#innerWrapper {
width: 680px;
margin: 0 auto;
border: 1px solid #000;
p {
margin: 0 0 8px 0;
</style>
</head>
<body>
<div id="outerWrapper">
<div id="innerWrapper">
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
<p>This is some content</p>
</div></div>
</body>
</html>

After installing OS X Yosemite 10.10.2 - I get this when I try to open Illustrator " To open "Adobe Illustrator CS6" you need to install the legacy SE6 runtime." I can not get seem to do this, how is this done?

After installing OS X Yosemite 10.10.2 - I get this when I try to open Illustrator “ To open “Adobe Illustrator CS6” you need to install the legacy SE6 runtime.” I can not get seem to do this, how is this done?

Robert,
It seems to be enough to create empty folders at “/System/Library/Java/JavaVirtualMachines/1.6.0.jdk” and “/System/Library/Java/Support/Deploy.bundle”, to make Illustrator use Jave SE 8 as it should.
This way to get round the legacy JAVA requirement was presented by Kals in post #7 in this thread:
https://forums.adobe.com/thread/1637908

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done?.

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done/.

Use a DVD burning program:
https://www.google.com/search?q=vdvd+burning+program&ie=utf-8&oe=utf-8&aq=t&rls=org.mozill a:en-US:official&client=firefo…

How is it done...?

Similar Messages

Maybe you are looking for