How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?

Hi sir,
         I created A tab control of 4 pages.How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.

You have a couple of possiblities:
Keep the tab value in a shift register and use a value changed on the boolean to increment or decrement the tab. Write to a local variable of the tab as needed (I would recommend against value property nodes as in the above examples by others).
You could also hide the tabs and make the tab control an indicator. Now you can write directly to the terminal if the boolean changes and you don't even need a local variable.
Here is an example showing both (LabVIEW 8.2).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TabSwitcher.vi ‏18 KB

Similar Messages

  • Is it possible to change the tab index color?

    I was wondering if it was possible to change the highlight
    color of tabbed elements, specifically buttons? When tabbed to,
    buttons have a yellow rectangle highlight by default. Is it
    possible to change this color and if so how?
    Take care,
    shayne

    Thanks.
    Geoff - Changing the color in Full Screen with Menus has no effect. The dark gray is still there after a close CS4 and open.
    Thanks for the alternative approach. The Faststone screengrab process is quicker. It's just a nuisance you can't change the color or thickness of the grabbing lines.
    Rob - which background? When I right click on the CS4 background - the working area with nothing in it - I get no context menu. I get nothing in fact.
    I am surprised that the Prefernces/Interface changes don't work but they don't seem to.
    I have done abou 160 screen grabs and probably have another 3-400 to do.
    David

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • How is it possible to split the table cells in Pages, Version 5.1

    How is it possible to split the table cells in Pages, Version 5.1?

    This is a feature removed in the change from Pages 09 to Pages 5.0.1.
    If you need this facility, revert to Pages 09.  If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

  • Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
    or
    Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
    Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
    Peter

  • Is it possible to change the page of a linked PDF without relinking?

    Is it possible to change the page of a linked PDF without relinking and going through the import options?
    I'm trying to import seveeral pages of the same PDF. The process would be quickest if I could import it once, then duplicate the image box a number of times, then just change the page number each image box is linking to.
    At the moment I'm having to relink (or place), then go through Import Options, then choose the page - it's a long process that feels like it should be quicker.
    Any ideas?
    Thanks

    The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
    My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

  • Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    fruhulda wrote:
    If you see any grey"background" if is on the left and that is the comment field.
    Hi fruhulda
    It's not the comment field which is a restrictive description.
    In fact it's the window's background.
    Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Is it possible to change the hard drive in a macbook pro, if so where from? and how?

    is it possible to change the hard drive in a macbook pro, if so where from? and how?

    secondrow wrote:
    whats a green drive? thnks
    Green is a marketing term for a drive designed for lower power use, lower noise, and lower heat. The side effect is that it's not as fast. Black drives are designed for highest performance, so they might use more power and run hotter and noisier. I upgraded my Apple Time Capsule with a green drive, but I put a black drive in my Mac Pro.
    Kappy wrote:
    7200 RPM drives are faster than 5400 RPM drives.
    As in cars, RPM is not the sole determinant of performance. In some cases, a newer drive at a lower RPM is faster than an older drive at a higher RPM, when the newer drive uses better technology. I have heard that some of today's high-capacity 5400RPM drives are faster than 7200RPM drives of lower capacity simply because the very high density of a 1TB drive means more data passes under the head even at a lower RPM. Certainly there have been times in Apple's past when new lower RPM drives were faster than higher RPM drives of the previous generation, a notable example being when 4200RPM perpendicular recording drives were introduced and beat 5400RPM drives.
    Yes, generally RPM can be used to compare, but it is important to realize it isn't always true.

  • How do I change the spacing before or after a hard return in Pages 5.5.2?    I am working on an academic article and need to specify paragraph formatting (OS X Yosemite 10.10.2)

    How do I change the spacing before or after a hard return in Pages 5.5.2?    I am working on an academic article and need to specify paragraph formatting (OS X Yosemite 10.10.2)

    Hi Michele,
    Select the paragraphs where you want to change the spacing.
    Format Panel > Text > Spacing
    You can change 1.0 - Single to something else, or type a number in Before or After.
    Regards,
    Ian.

  • Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English?  The app was downloaded in Spain.

    Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English?  The app was purchased in Spain and I am living in spain temporarily

    Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

  • Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?, Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?

    Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?

    The tempo setting applies to the whole song, but only to the recorded midi instruments or loops. It's a bit of a kludge, but you could record different sections at different tempos, export each as an AIFF file, then glue them together in a new project.
    The same goes for the key.
    tt2

  • Can anyone please tell me if it's possible to change the text alert tone to a downloaded tune and how to do so? Thanks.

    Is it possible to change the text message alert tone to a downloaded tune on iPhone 4? How is it done?

    Simple answer, at the minute it's not possible. That may change with iOS 5

  • Is it possible to change the URL of an application?

    Hi All,
              I was working with the oracle apex and created few applications almost a year back, due to my higher studies there is a gap with the tool..and finally I am in.
    Am planning to create an application which will be similar like a personal website.My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
    instead of having this big..
    http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
    I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
    Thanks
    with Regards,
    Ramya.

    My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
    instead of having this big..
    http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
    I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
    If you are just looking for a nice and short URL to start your application, why not just use a URL shortener service like goo.gl ?
    Just put in your long URL and it will create a nice and short URL for you... for example, the above URL is now http://goo.gl/FijYxn
    - Morten
    http://ora-00001.blogspot.com

  • Is it possible to change the URL of the browser corresponding to changes in the timeline?

    Hello,
    I'm trying to create a whole website in Edge. Is it possible to change the browser URL for different sections of the animation. For example me.com/part1 leads to 2.0 seconds in the animation. And for example when you type me.com/part2 the browser would go to 4th second of the animation. And vice versa, when the animation reaches the 4th second the browser URL would change to me.com/part2. It would be really great if that were possible. Any ideas on how to accomplish it?
    Thanks!

    Hi there, Joel's example seems to be exactly what you're trying to do. All you need to do is replace his functions with your functions.
    There are two main parts to his example: 1) reacting to a URL change directly in the URL bar, 2) reacting to a button click, and setting the URL
    Regarding Item 1: this line (this adds a listener for when the URL hash is changed, and calls the 'sym.animate' function in his example). Note that he is linking the value after the # with the symbol names 'panel1', etc. This line enables the functionality for you to be able to directly change the URL to: testStep95.html#panel2, and the site will change pages.
    $(window).on("hashchange", function(){sym.animate(location.hash.replace("#",""), sym.onStage)});
    Regarding Item 2: he's setting the page title (based on the active panel symbol) and URL hash, in the  'sym.animate' function. He calls the 'sym.animate' function on click of btn1, btn2, btn3:
    document.title = panelIn;
    window.location.hash = panelIn;
    Props to Joel for his slick example!

  • Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

    Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
    Adapter: Ralink RT3070 Chipset wifi adapter
    Tested: os Windows 8.1 Professional
    Hot Spot: 802.11b
    The first problem windows 7-8.1 got IP adress and connect he public HotSpot  but  cannot load login page or any other page. It does not work with it.
    The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
    multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
    lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
    blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
    superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
    social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
    networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
    On windows XP or linux have a MAC adress Change function  allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
    addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default  driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
    and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
    The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
    driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
    Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows  need debugging and modernize.The quality of Wi-Fi is now the operating system
    is now a thing order which is not good then the operating system is unusable.

    Hi,
    For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
    Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited.  To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
    bit (locally administered) in the second nibble.  Thus possible values for the second nibble are limited to 2, 6, A and E.
    In other words 
    MAC address:  “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal.  The hexadecimal “Y”, written in binary format, is  Y:  “kmnp”,  where “p” is the least significant bit; 
    p=0 --> unicast;
    p=1 --> multicast;
    n=0 --> globally assigned MAC;
    n=1 --> locally administered;
    So, actually MAC can be changed  to any combination in which p=0 and n=1;
    “Y” can be 2, 6, A or E.
    So the possible MAC addresses in Windows 7 for wireless adapters:
    X2-XX-XX-XX-XX-XX
    X6-XX-XX-XX-XX-XX
    XA-XX-XX-XX-XX-XX
    XE-XX-XX-XX-XX-XX
    For the wifi hotspot issue, please check this blog to see if it can be helpful.
    Windows 7 Connectivity Problems in Public Hotspots
    http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
    Kate Li
    TechNet Community Support

Maybe you are looking for