How is it possible to connect more than one SAP R/3 4.6c System to TREX 6.1

Hi,
I'm using SAP TREX 6.1 together with an 4.6c System. Now I want to connect the TREX to more than one R/3 System, so that every R/3 System has got its own Index-Category on the TREX Host.
Does somebody know what I have to enter in the ini files -->TREXRfcServer.ini and in the TREXDaemon.ini? Perhaps there are some other important things that have to be considered at the usage of TREX 6.1 with 2 or more connected SAP R/3 Systems?!
I would be happy about every helpful answer!
greetings,
Chris
Message was edited by:
Christian Blatt

Hi Edmond Wong,
Follow the steps below and you should be able to connect via SAP Logon Ticket.
1. Set your system definition in portal to read SAPLOGONTICKETS.
2. Go to your R3 server and execute transaction SM30, maintain table view TWPSSO2ACL
3. Create a new entry with your portal ID and client info. Subject name and Issuer name is extracted from your portal Key Administration under DN of Owner and DN or Issuer. Remember to enter your serial number (normally oo if you only have one portal instance on your server)save this entry.
4. Next download your portal certificate in der format from your Key Administration page. Unzip the file and you should have a verify.der certificate.
5. Execute STRUSTSSO2 in R3, import your verify.der certificate into R3, then click on add to certificate list, also click on add to ACL list. Save entry.
6 As for ITS, all you need is to add the parameter ~myssocookies2 = 1, restart your ITS.
7. remember to remove your user mapping befor testing the connectivity.
Drop me an email should you have problems. [email protected]
Ta!
Fred

Similar Messages

Using Maverick, how is it possible to open more than one calendar window?

Hi, I'm using Maverick 10.9.1
My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
Many thanks in advance for your help!
ph

See if the section on group calendar helps.
http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

Connect more than one computer to a time capsule volume?

Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
Thanks

While it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product.

Is it possible to print more than one picture at a time on a single page and if so, how?

is it possible to print more than one picture at a time on a single page and if so, how?

Hi Rowegarth.
HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
You could also start with a "Design Your Own" collage print with a white theme.
This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
www.youtube.com/embed/VRoGjhXPm4I?rel=0
The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

How can i connect more than one database

i would like to connect more than one database one my laptop
now i have database one and sid=ddms
and i would another such as sid=ddmf
how can i connect two database on the same my laptop

I am not sure what you mean by after built? Are you trying to export data from one database and import it into another? If so, export it using data pump making sure you have the correct ORACLE_SID. Also be sure both database have to same character set. Then change the ORACLE_SID to other database, and run data pump to import the data into the other database. Hope that makes any sense...

HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

You could start by posting onto an iPod forum instead of a "Using iPad" forum.

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How do I install Lion on more than one Mac

How do I install Lion on more than one Mac? As I have a MacBook Pro and a iMac?

Purchase Lion on one of the machines.
Log in to the MAS with the other machine, using the same Apple ID you originally bought Lion with. Go to the Purchased Tab and Lion should be available for download. It should say Install.
It's possible that you will be asked for credit information as a form of verifying who you are.

Connecting more than one ipod to one mac computer

Can anyone please advise me on how I can connect more than one ipod to just the one mac computer. I need to set up 3 ipods to work on the one mac computer but each with there own itunes library. thanks

When the iPods belong to two users, there are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. Each iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists.
Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

Is it possible to setup more than one person's iTunes iPad account on a shared computer? We each have an iPad to setup.

is it possible to setup more than one person’s iTunes iPad account on a shared computer? We each have an iPad to setup.
Would the data be combined or would the 2nd person have a separate iTunes program. How would this be done?

I'm not totaly sure if I understand your issue, but it sounds like you want to use the same spry widget with different settings on the same page? Is that correct?
I dont use spry tooltips, however, what would see to work would be if you configure the second spry tool tip, perhaps in a seperate page, rename the new or second set of js and css files to read
<script src="../_scripts/SpryAssets/SpryTooltip2.js" type="text/javascript"></script>
<link href="../_scripts/SpryAssets/SpryTooltip2.css" rel="stylesheet" type="text/css" />
So now you will have two seperate js files and css files.
So you have this
<script src="../_scripts/SpryAssets/SpryTooltip2.js" type="text/javascript"></script>
<link href="../_scripts/SpryAssets/SpryTooltip2.css" rel="stylesheet" type="text/css" />
<script src="../_scripts/SpryAssets/SpryTooltip.js" type="text/javascript"></script>
<link href="../_scripts/SpryAssets/SpryTooltip.css" rel="stylesheet" type="text/css" />
See how that works for you.
Gary

With iphoto it is possible to order more than one book at once?

With iphoto it is possible to order more than one book at once? If yes, what can it be done? Thanks

thank you! Another question regarding iphoto. I would like to disable the 'faces' feature as I don't use it nor wish to use it and I feel it slows down the program when I import a large quantity of pictures. How can I disable this feature?

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How can I synchronize safely from more than one computer?

First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

You cannot do what you want.
The ipod touch can sync with ONE computer/library at a time.
When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
This is the way it is designed.

How is it possible to connect more than one SAP R/3 4.6c System to TREX 6.1

Similar Messages

Maybe you are looking for