How is it possible to define a ROI in a live image from a camera

I try to establish ROIs in a live image from a Roper Camera.

It´s the same procedure like drawing ROIs in static (non-camera) images. Look at the ROI examples that are shipped with IMAQ. If you need further help please mail again and I´ll send you an example ...

Similar Messages

  • How can I possible lose my entire photo library/ referenced master image file if I have downloaded all my images directly onto Aperture?

    How can I possible lose my entire photo library/ referenced master image file if I have downloaded all my images directly onto Aperture?

    CeliaJane, you need to distinguish between the Aperture Library and the Aperture Application.
    Aperture stores your images in a database, and it is this database that we have to find and probably to repair, not the application (hopefully). And since you do not see any images, I suspect that Aperture created a new, empty Aperture Library,and you are now viewing this empty library. Usully the library sits in your Pictures fiolder.
    Look into your Pictures folder, if you see a file with a colorful icon with three pictures, called something.aplibrary, as shown above. And also enter ".applibrary" into the "Spotlight" searchfield in the upper right corner of your screen. If you have more than one Library, you should be able to find them this way.
    The largest file you find will probably be the correct library.
    When you have found the correct file called aperturexxxx.aplibrary, try to open it in "First Aid" mode.
    Select the Library and press down "command" and "option" key at the same time, while you double click the library.
    Now the First Aid dialogue should appear:
    Select: Repair Permissions" and see if you can open the Library again. If it did not help, try the other two options in turn.
    Regards
    Léonie

  • How to view tagged images from the camera in Lightroom?

    How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far. Any solutions welcome please.

    There isn't a way to do it that is part of Lightroom. There is a plug-in that might help you, though. Check it out here: Locktastic
    It doesn't say if its compatible with LR4, but you can try it to find out.
    Plug-ins aren't usually as efficient as built-in functionality (like PM), but it might be a solution for you.

  • Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?

    Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?
    I want to use my iPad as a screen for a reversing camera in my van and want to know if this is possible. do i need a bluetooth camera and is there a specific one that will connect to the iPad? Or is there any form of adaptor that I can plug the camera straight into the iPad?
    Any ideas?

    no
    only "live" thing one can do is to airplay mirror the screen of a ios device or a newer mac with mtn lion

  • I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1  do i need to download a  DNG convertor? if so how do i get the images from the camera to the convertor?

    I am downloading from a Canon 650d  TO Photoshop CS5.1  and Adobe Bridge CS5.1  Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

    Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes. 
    If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
    Camera Raw plug-in | Supported cameras

  • How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

    Hi,
    I have :  -  IMAQ1394 2.0.1
                  -  NI Vision 7.1
    In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
        Dim Image0 As New CWIMAQImage
        imaq1394SnapCW(sid0,Image0)
        CWIMAQViewer1.Attach Image0
    Now,How can I do this in VC++6.0?
        I tried:
                  C_CWIMAQImage m_imgViewer1;
                  m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
                  m_CWIMAQViewer1.Attach(m_imgViewer1);
                  imaq1394SnapCW(Sid,m_imgViewer1);  <--there is no "imaq1394SnapCW "function in VC++,why?
        Please help me!
        Thank you!

    For people looking back at these old posts regarding
    CWIMAQViewer - it was not made to be used in the C environments and is made
    for VB.
    Refer to the following locations for displaying images in C
    environments:
    Start»All Programs»National Instruments»Vision»Documentation
    Start»All
    Programs»National Instruments»Vision»Text Based Examples
    Make
    sure that you look at the examples and documentation that is in
    reference to the C environments not the VB environments
    Vince M
    Applications Engineer

  • How do I get rid of "unreadable files" when I am importing from my camera?

    How do I get rid of "unreadable files" when I am importing from my camera?

    Are all images unreadable? What is the exact error message you are getting?
    If only a few images are unreadable, try to import not all photos at once, but in smaller batches, until you know, which photo it is that cannot be read. Import all photos that can be read and reformat your card in the camera to remove the unreadable files.
    But if all photos are unreadable, try, if Image Capture can read your card.
    Is it a new camera? Have you been able to import from that camera before?

  • How can we run and control live images form a camera plz help

    hi
    i want to now how can we run and control live images form a camera on to a aaplet.what technologyi used for this project . u can check the url http://www.jal.co.jp/en/live/ as a demo.plz can anyone guide me.how to start and which technologies to use,
    regards
    sheetal

    Hi,
    You can try a package named: JTwain, which is available at http://asprise.com/product/jtwain.
    JTwain supports all kinds of digital cameras and scanners. You can use Java to access, contorl digital cameras and scanners, and of course, to acquire images with flexible settings.
    The developers' guide is available @ http://asprise.com/product/jtwain/devGuide.php
    In the simplest case, one line of Java code can solve your problem.
    Good luck!

  • How can I download automatically only new images from my camera?

    Hello,
    I can not download only new images from my EOS 450D-camera with Elements 10-Photodownloafer (Mac os).
    Each time I use Photodownloader it downloads all images , also those that were downloaded preveously
    How can I set photodownloader?
    Thanks for your advices

    I share my card with my wife and she likes to download our images also on her PC, so erasing all images is not an option.
    It seems that earlier version of adobe photo downloader has the feature "copy only new files" , but V10 does not.
    Thanks for your answer
    Mikele
    Op 10-jun.-2012, om 15:33 heeft 99jon het volgende geschreven:
    Re: How can I download automatically only new images from my camera?
    created by 99jon in Photoshop Elements - View the full discussion
    Don’t you format the card in the camera after each download? That will wipe all images and prepare the card for a fresh shoot.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4480409#4480409
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4480409#4480409. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT201209 How is it possible for an American to receive a Itunes gift from a Canadian.

    How is it possible for an American to to recieve a Itunes gift from a Canadian?

    All iTunes gift cards and gifted items are country-specific, they can only be redeemed in the country from which they originated - only somebody in Canada with a Canadian iTunes account can redeem a Canadian gift

  • Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

    Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

    https://discussions.apple.com/message/15678716#15678716
    (Added)
    The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files.  For those tasks you need a Graphics program.
    Message was edited by: Kirby Krieger

  • How can I import images from my camera to my external drive instead of Mac, but still use IPhoto?

    I would like to preserve space on my new Mac and import photos from my camera to my external drive instead of my Mac, while still being able to use Iphoto. Not sure how to specify this.

    Move your Library to the Extnernal Disk -
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Then import as normal.
    Regards
    TD

  • How is it possible to suppress one of the two iTunes account from the iPhone?

    Hey =) I'm sorry for the bad english, but i'm french.
    So, I'm totally lost, my mother is like... Furious, mad at me... Because the other day, i used her iPhone to register with MY app store account, (so iTunes Store Account, to be clear), and since then, she can't use her iPhone without having it asking to give MY password when she wants to upload anything. So i'm really really lost.
    And second, my mother is SURE it's linked to that problem, that i caused with my connecting to my iTunes account, she doesn't have any of her musics anymore in the iPod part of the iPhone, the only way she can listen to them is in the "Achats" in French (= Uploads? The things you bought on iTunes, i don't know how to translate that sorry) of the iTunes Store, and she can't put them back into the music of the iPod.
    I REALLY need your help, she's mad at me, she says i broke her iPhone... Thanks!!

    Yes... It's your fault. The easiest way to fix it would be to plug it into her computer and restore it from the last backup she made before you touched it.

  • How can I transfer images from digital camera without iPhoto?

    The thing is that I wish to see my camera's card as an external storage device, as it happens when I connect it to my PC, so I can manually choose which to transfer and where.
    But when I plug my camera it automatically opens iPhoto. At first,, this was fun, because I didn't even have to load any device drivers. But if you're using pro-camera equipment and manage and photoshop many images, like I do, an application like iPhoto isn't the way to do it.
    Any feedback?
    Thanks
    Panos
    iMac G5   Mac OS X (10.4.3)  

    Hi Panos,
    I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
    My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
    This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
    The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
    Lori

  • How can i add the Sigma 10mm 2.8 Fisheye lens profile from the camera profile in windows to lightroom 5?

    It only seems to give me a 15mm fisheye option for Sigma and not the 10mm even though it is a profile in the camera profiles folder.
    Can anyone help with importing this profile into Lightroom?

    nickpearse wrote:
    Just so it is black and white for my sake. I am shooting with a Nikon D7100 using a Sigma Fisheye 10mm 2.8 and using the Lens Profile of the Sigma 15mm 2.8mm on Lightroom.
    Then the correct profile to use is the Sigma 10mm F2.8 if you want proper Vignetting correction and matching Distortion correction, but you'll need to shoot camera raw images (i.e. no JPEG lens profile). This is also why you are only seeing partial correction. As I said, "With a crop factor camera only the central crop area of the full-frame Sigma 15mm lens profile will be applied."
    That said there is absolutely nothing wrong with using the Sigma 15mm lens profile with your crop factor Nikon D7100 if you are happy with the partial correction results, but you can also do this using the correct Sigma 10mm lens profile (set less than 100). There is a fisheye correction plugin called Fisheye-Hemi that works very similar in that it only applies partial correction. You're getting about the same results as Fisheye-Hemi for free using partial correction with the LR lens profile tool. That should make you happy! I suggest experimenting with both the 15mm and 10mm lens profiles and start shooting camera raw image files. Your're not realizing the camera's full capability shooting JPEGs!
    In the DSC_7098 images posted none of them look very sharp (slow shutter speed?). Other than geometric correction I can't judge the posted images for "sharpness" in the corrected areas, which is the major concern. The biggest issue with rectilinear correction of fisheye images is loss of detail in areas with the most correction (edges and corners).  If that were not the case people would use fisheye lenses for ALL wide-angle images and simply correct them inside LR. Sadly that's not the case and using LR's Lens Profile Distortion and other transform tools to correct fisheye images considerably softens the corrected areas (sides and corners).
    Fisheye geometric distortion with some subjects is almost undetectable. So how much correction you need will vary by subject type and what the end use for the image. Any fisheye image that has correction applied will lose sharpness in the corrected areas, which may be fine for most purposes other than large prints.So it's best not to strive for 100% rectilinear correction–Just the correction needed to make the image look better.
    Canon 8-15mm F4L FE on 5D MKII Full-Frame @ 15mm (No correction)
    Looks good to me with no correction!
    For more flexibility and better results PS's Wide Angle Adaptive filter and content aware fill tools will retain more image detail in the corrected areas. Here's the same lens and camera with an image processed in PS:
    15mm Full-Frame Fisheye
                          LR Distortion = 50 (partial)                PS Adaptive Wide Angle Filter + Content Aware Fill
    The corner image detail is about the same in both of the above images at 1:1 view. Partial LR Distortion correction is good!
    So what happens if I apply 100 Distortion correction to the image inside LR?
    1:1 Compare View (lower-left) with LR Distortion = 100
    100% LR Distortion correction of fisheye images is NOT good IMHO!

Maybe you are looking for