How is it possible to make a 18 m.p. Picture with a canon t31 slr?

Forgive a newbie but when I set my t31 camera to either raw or the highest jpeg settings, the saved pictures properties indicate that the picture is only 5 m.p.
The camera is rated at 18 mega pixil...What gives?

Jpeg is a compressed format. The camera firmware makes "intelligent" choices to maintain maximum image quality within the 8 bit dynamic range of the jpg file. The exact size of the file will depend on the image itself but will be in the 5-6 MB (megabyte) range when your camera is set to the highest jpg quality.
Raw files, on the other hand, are minimally processed and the saved file will be around 24MB. If you are seeing 5 MB files from what you think is raw, you may be looking at the .jpg file if you set Raw+jpeg. Otherwise I suggest you check the menu "Image recording quality" setting again as it may not be set to Raw.
Recall as well that the file name of a raw file ends ".cr2" while a jpeg file name ends ".jpg".

Similar Messages

How is it possible that a target has two deltas requests with the exact sam

HI,
How is it possible that a target has two deltas requests with the exact same records?

Hi Mohammed,
There are couple of reason behind it.
main reason is
take one scenario we have DSO as source and cube as target.
Now DSO contains only 1 request, which i have loaded to cube by using delta.
after that i have deleted DSO content by using right click on it and delete data.
(hope u know that it will not delete request from target automatically)
now once again i have loaded same request from datasource to DSO
and then loaded delta again from DSO to cube.
In this case for 1 single request in DSO you can see 2 request in cube with same data.
Regards,
Ashish

TS1424 Is it possible to make purchases from canadian itunes store with a united states iTunes account

Is it possible to make purchases from canadian itunes store with a united states iTunes account.

No. You can only purchase from the US iTunes Store.
Regards.

How can I correct and prevent white eyes when taking picture with my Iphone4S?

How can I correct and prevent white eyes when taking picture with IPhone 4S?

Hi Friend,
To correct red eyes on pictures, go to Photos app, tap the photo you want correct, tap Edit, Tap a red ball placed in the bottom of the screen, tap manually the red eyes, and Confirm.
Hope it will be helpful

Is it possible to make a move in contouring mode with onboard program

I use Labview 7.1.
I have a motion board 7344.
Is it possible to make a move in contouring mode (as in the attached vi) with onboard program and how do that?
Attachments:
Onboard_program.vi ‏79 KB

It's not possible to use the contouring mode in an onboard program like you did it in your example. The reason is that while the program is downloaded the write buffer.flx is NOT executed. Thus it can't download the buffer data stored in your front panel arrays. When you start the onboard program later it doesn't have access to your buffer data on the front panel.
In fact I don't see a real advantage why you would like to run the write buffer.flx in an onboard program. You could configure and download the buffer on the host and then use it in an onboard program.
Best regards,
Jochen Klier
NI-Germany

How to scan my computer and external hard drives for pictures with out importing duplicates.

how do i scan my computer and external hard drives for pictures with out importing duplicates.

iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

How do I create a smart album that contains all pictures with no keywords?

Hi,
I have many pictures which currently don't have any keywords at all. Now I want to tag these pictures with keywords. How can I create a smart album for those pictures without any keywords? So that I can then work just on these pictures...
Note that I don't want to find pictures that don't have a specific keyword. I want to find all those pictures which have none keyword at all.
Thanks,
Rainer

Well, there's a way but it's not great...
Start with a smart album at whatever level you want to keyword everything under. Set to search where "rating is greater than or equal to unrated".
Select all images, and apply a keyword like "NeedsKeyword". Yes, even the one with keywords already.
Now change the smart folder - use the "+" menu on the upper right corner of the query box to add an "IPTC" search. In that row use the dropdown by IPTC to find "keywords", then set the one next to it to "is", then type "NeedsKeyword" (or whatever you used) into the text box. Now go up to the top of the query box and change the "Match" dropdown to be "all" instead of "Any".
What we've done here is find all images where the only keyword is "NeedsKeyword", all the ones you've done with keywords already will not appear.
Now, copy these images into an Album (not smart album) for tagging - this is because as soon as you tag an image it will vanish and you may wish to apply more than one tags).
After you are done tagging, you want to remove the tag - this is trickier than you might think, as you need to remove it from images tagged before in addition to the images in the Album you just made.
First, change your smart folder to once again find all images by unchecking the IPTC keyword search. Now you'll see all images - but you're not done yet! You cannot batch undo a keyword in a smart folder, even though you can batch add. Select all of the images and drag into the Album you were using to keyword. Inside an Album the keyword metadata inspector shows only common keywords, NeedsKeyword should be one of them - remove it and it will be gone, and all your images tagged. Now you can remove the Album and the Smart Album you created.
Harder than it needs to be, I'd say - I've submitted feedback you need some way to search for untagged images. Heck, it may already be in 1.1! Or Joe might know of an easier way that has eluded me.
Good luck!

How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

Hello,
i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
Any idea?
Thanks for your help!

Hmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How is it possible to make a direct link to a flash-site page?

I need something like this: http://ironmanmovie.marvel.com/#/downloads
How does the swf file know the url it’s been opened from?
No flashVars.

Hi,
This is called deep linking. I think the most widely used deep linking "plug-in" is Asual's SWFAddress.
With this, you can have the browser's address bar virtualy change page when the user changes page in your flash; but the reverse is also true, SWFAddress can detect a "virtual" page from the browser.
Design Cyboïde
Création de sites web Montréal

With iPhoto 11 how is it possible to include the title of the photo with the image in the email?

Hello. In an older verson of iPhoto I could includ a title or description with the photo image in an email. With the Cloud and old Mobile Me emailing directly from iPhoto ('11) I can't find a way to do it.
Any help.

Use the old way and set Mail as your email client of choice in the iPhoto Preferences.

Is it possible to make the delete button work properly with google apps hosted gmail accounts?

The subject says it all. This has been ungoing problem for YEARS. Has anyone come up with a fix or work around? It is ridiculously annoying to have to come home and delete 100 messages I already saw over the course of the day and know are worthless...

Unfortunately I do not have that option.
That screen gives me the following:
Account
Mail on/off
COntacts on/off
Calendars on/off
Mail days ot sync
Mail folders to push
Delete account
That is all I have.
If I go into account form there I have:
Email:
Server:
Domain:
Username:
Password:
Description
Use SSL on/off
That is all I have.

How to Reset Photoshop CS6's Preferences File | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, Julieanne demonstrates two methods for one of the most common trouble shooting techniques: resetting the Photoshop Preferences.
http://adobe.ly/QPZVvn

Been looking for one of your tutorials referencing the kind of problem I seem to be having, but haven't located it. It concerns Photoshop CS6 and saving files to jpeg when an image has been created using levels and layers. The problem is this:
Recently I got Photoshop CS6 and started using Layers. I put stars into a night sky. Followed basic proceedures starting with noise filters and reducing the number of stars through levels and screen settings etc, I created an image that started with thousands of stars to around a hundred or so. I added some light to the stars and some color, then saved it as a photoshop image. All fine. When I tried to save the image as a jpeg, some of the layers went missing and the final saved image contained all the thousands of stars I started with. Is this a bug in the program and if so is there a fix for it. If there is another way to get around this problem and allow me to save the image as a jpeg without losing layers, that would be fine as well. I've tried grouping layers and images together and other collective methods, but the end results are still the same. Layers go missing and the sky is filled with all the stars (noise filter settings), not the finished product.
Thanks in advance
Lorne R.

It's possible to make an adobe air with a php files to save data?

Hi,
I would to make a standalone version with Flash Adobe CS3.
How is it possible to make that? A other question, I have a php file to save the data from the user's answer, how is it possible to integrate this file to the air program?
Thanks for your answers and sorry for my english.

If you know where the page is at, I myself don't see any reason why you can't access it.
The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
I'd say go ahead and at least try.
davewdan

I want to delete my Revel account. How is it possible?

I want to delete my Revel account. How is it possible?

Hi DaneMom,
I can help you with that. I will be sending you a private email with further instructions.
As a note, please be sure to download all your images.
Glenyse

Im stuck in an endless loop to restore my i touch. How do i stop and make it work.

im stuck in an endless loop to restore my i touch. How do i stop and make it work.

ive been struggling with the same thing myself. i was told to rename the drive that my ipod was on ie. F to Z and then reboot and try the restore process in itunes again but make sure your ipod is plugged in the entire time. im about to try this myself. goodluck!

How is it possible to make a 18 m.p. Picture with a canon t31 slr?

Similar Messages

Maybe you are looking for