How is Sync supposed to work? There are things it does; but some obvious ones it doesn't.

Shouldn't Sync (after a crash, where previous open Tabs are lost) open in the latest Synced configuration? Or, am I over-wishing?
When I Sync Now on a computer does FF4 not store the chosen configuration items to a Mozilla server somewhere?
When I Sync Now from a second computer, (the one for which I obtained a Passcode and entered into the original computer), does FF4 retrieve settings from the aforementioned server? Or, is the second computer writing configuration data to the server. Or, is it sending data to the server for storage in a second configuration data set?
Perhaps there is a white paper describing how this is structured? Perhaps someone could tell us some of this information saving me the trouble of running a bunch of 'experiments' such as altering bookmarks, syncing and then examining the listed bookmarks!

I would remove the Audio Menu button from the Main Menu, since you don't want users to access it immediately, and it only applies to one timeline.
Make the Main Feature button link to a menu where the user is forced to choose an audio track.
Set the link for each of the other buttons that link to the other timelines explicitly using the Specify Link option to force the primary audio track (in case the users are returning from watching the main program with the alternate audio track).
If necessary, you can create a duplicate set of scene menus for each path (Main Feature, other timelines). Once a user starts down a particular path, the other path's menus are not accessible until the user returns to the main menu and then starts down the other path. If I understand your navigation setup correctly, the extra menus probably are not required.
-Jeff

Similar Messages

  • How is PUSH *supposed* to work?

    I have just moved from a v1 iPhone to a 3G. I have had the 3G for 3 days.
    I'm trying to understand how the PUSH function works. The User Manual is not very clear.
    I'm using Mobile.Me
    I am not getting an alert when my phone is 'asleep'. Is this normal? (I would have thought the point of PUSH was that you are alerted when there is email .... )
    I can send myself a test, which is picked up pretty much instantly by my desktop Macs, but even if I leave the iPhone untouched for say 20 minutes, then wake it up, there is still no message. If I then go into the Mail app. (on the iPhone) it will then connect, download and alert me.
    This doesn't seem like the correct behaviour.
    Any explanations of how it is supposed to work would be most welcome.
    Grant Symon

    RomingGnome, Deggie, Thanks.
    I think what happened was that I had deleted my non-standard MM account on the iPhone, but then of course, when I did the first sync, it was replaced from the MM servers.
    I have now left this account on the iPhone, but turned it off, and made a new MM, standard account, which I then synced, did a test and it worked immediately, with alert, whilst the phone was asleep. Very very cool and just what I wanted.
    I shall now have to experiment to see if I can get the non-standard MM account to work too. All this because Apple won't let us use a non MM 'return address'. How dumb is that? Still ... one has to hope that with Apple trying to push the iphone towards enterprise, they might notice that [email protected] is not really the return address most business users are going to want.
    Thanks again,
    Grant

  • I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

    I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
    It started after the major update to iOS 7.
    I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
    I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
    I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
    My iPad 4 is not affected with the problem and works as it should.

    To delete, tap "Edit" (tap to enlarge image)

  • HT1338 for itunes 10.7 it is saying that my mac need version OS X needs to be version 10.8.6 - how do i get this? There are no current software updtes and i cant use iTunes for my new iphone 5

    For itunes 10.7 it is saying that my mac need version OS X needs to be version 10.8.6 - how do i get this? There are no current software updates and i cant use iTunes for my new iphone 5

    I think you meant 10.6.8, not 10.8.6
    It requires an upgrade, instead of a free update.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • Is this how pacman is supposed to work? (dependency "problem")[SOLVED]

    Hi
    Just did a fresh install of archlinux after buying a new computer.
    Installed some drivers.. kde (and some other stuff)
    Then.. just for the fun of it I removed qt3 with pacman -Rd.
    I was expecting that pacman -Syu would see that a dependency was missing and try to reinstall qt3.
    So I did a pacman -Syu, and what happened? Nothing.. pacman says all is okay, well all is not okay cus kde will not work without qt3.
    Is this how it should work or is this a bug? I checked the manpages for some kind of "install all missing dependencies" but found nothing..
    /Ivan
    Last edited by Fuel (2008-01-23 01:34:22)

    fwojciec wrote:
    That's not how Arch is supposed to work.  Arch is about giving power to the users.  With power comes responsibility, and this responsibility falls on the users in this case.  Remember -- this is a "do it yourself" kind of distribution and so if what I want to do is to screw up my system I should be able to do it in an easy, efficient and elegant way.  This is consistent with the mission statement of the Arch Linux project, this is how Arch works and this is why many of us love it.
    On a personal note, if Arch/pacman tried to hold my hand more, like you suggest it should, I'd be switching to another distro very, very quickly.
    It's not really about trying to get arch/pacman to hold your hand for you. It's more about giving the possibility to recover from a serious mistake. If you can tell me something wrong with adding an option wich checks for missing dependencies on your system and how that particular feature intervenes with "the arch way" - then please do.
    I'm not saying arch is bad, arch is actually the best linux distro I've used so far - but there is something common with almost all distros - you get dependency problems after a while, one way or another.
    Thats why I think there should be a way to resolve such issues.

  • Hi everyone,How to check out that if there are bad blocks in a disk.

    root@SER-DATABASE # dmesg
    Thu Sep 8 17:00:09 CST 2011
    Aug 11 03:10:01 SER-DATABASE syslogd: line 24: WARNING: loghost could not be resolved
    Aug 15 16:59:58 SER-DATABASE su: [ID 810491 auth.crit] 'su root' failed for oracle on /dev/pts/5
    Aug 18 03:10:01 SER-DATABASE syslogd: line 24: WARNING: loghost could not be resolved
    Aug 25 03:10:01 SER-DATABASE syslogd: line 24: WARNING: loghost could not be resolved
    Sep 1 03:10:01 SER-DATABASE syslogd: line 24: WARNING: loghost could not be resolved
    Sep 2 16:51:24 SER-DATABASE su: [ID 810491 auth.crit] 'su root' failed for oracle on /dev/pts/5
    Sep 2 16:53:07 SER-DATABASE last message repeated 2 times
    Sep 4 16:21:53 SER-DATABASE scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,21 (ssd2):
    Sep 4 16:21:53 SER-DATABASE SCSI transport failed: reason 'timeout': retrying command
    Sep 4 16:21:53 SER-DATABASE scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,2a (ssd7):
    Sep 4 16:21:53 SER-DATABASE SCSI transport failed: reason 'timeout': retrying command
    Sep 7 11:37:33 SER-DATABASE scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,21 (ssd2):
    Sep 7 11:37:33 SER-DATABASE * SCSI transport failed: reason 'tran_err': retrying command*
    Sep 7 11:38:32 SER-DATABASE scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,22 (ssd1):
    Sep 7 11:38:32 SER-DATABASE * SCSI transport failed: reason 'timeout': retrying command*
    Sep 8 03:10:01 SER-DATABASE syslogd: line 24: WARNING: loghost could not be resolved
    ===============================================
    #iostat -En
    c0t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: SEAGATE Product: ST914602SSUN146G Revision: 0603 Serial No: 090498K0KV
    Size: 146.80GB <146800115712 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c0t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: SEAGATE Product: ST914602SSUN146G Revision: 0603 Serial No: 090398LPZG
    Size: 146.80GB <146800115712 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c0t3d0 Soft Errors: 2 Hard Errors: 1 Transport Errors: 0
    Vendor: TEAC Product: DV-W28E-R Revision: M.0B Serial No:
    Size: 0.00GB <0 bytes>
    Media Error: 0 Device Not Ready: 1 No Device: 0 Recoverable: 0
    Illegal Request: 2 Predictive Failure Analysis: 0
    c1t5006048452A692A8d0 Soft Errors: 0 Hard Errors: 4 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 4 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d34 Soft Errors: 0 Hard Errors: 5 Transport Errors: 3
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97515601920 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 4 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d33 Soft Errors: 0 Hard Errors: 7 Transport Errors: 3
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97515601920 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 4 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d32 Soft Errors: 0 Hard Errors: 5 Transport Errors: 6
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97515601920 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 4 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d6 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d43 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d42 Soft Errors: 0 Hard Errors: 0 Transport Errors: 1
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d41 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d40 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d39 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d38 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d37 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d36 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    c1t5006048452A692A8d35 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 97.52GB <97517568000 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    ===================================================
    # iostat -E | grep "Errors"
    sd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    sd1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    sd2 Soft Errors: 2 Hard Errors: 1 Transport Errors: 0
    ssd0 Soft Errors: 0 Hard Errors: 3 Transport Errors: 0
    ssd1 Soft Errors: 0 Hard Errors: 5 Transport Errors: 3
    ssd2 Soft Errors: 0 Hard Errors: 7 Transport Errors: 3
    ssd3 Soft Errors: 0 Hard Errors: 5 Transport Errors: 6
    ssd4 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
    ssd5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd6 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd7 Soft Errors: 0 Hard Errors: 0 Transport Errors: 1
    ssd8 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd9 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd10 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd11 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd12 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd13 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ssd14 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    ==========================================
    # format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/sd@0,0
    1. c0t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/sd@1,0
    2. c1t5006048452A692A8d0 <EMC-SYMMETRIX-5771 cyl 1 alt 2 hd 15 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,0
    3. c1t5006048452A692A8d5 <EMC-SYMMETRIX-5771 cyl 1 alt 2 hd 15 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,5
    4. c1t5006048452A692A8d6 <EMC-SYMMETRIX-5771 cyl 1 alt 2 hd 15 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,6
    5. c1t5006048452A692A8d32 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,20
    6. c1t5006048452A692A8d33 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,21
    7. c1t5006048452A692A8d34 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,22
    8. c1t5006048452A692A8d35 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,23
    9. c1t5006048452A692A8d36 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,24
    10. c1t5006048452A692A8d37 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,25
    11. c1t5006048452A692A8d38 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,26
    12. c1t5006048452A692A8d39 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,27
    13. c1t5006048452A692A8d40 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,28
    14. c1t5006048452A692A8d41 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,29
    15. c1t5006048452A692A8d42 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,2a
    16. c1t5006048452A692A8d43 <EMC-SYMMETRIX-5771 cyl 49598 alt 2 hd 30 sec 128>
    /pci@0,600000/pci@0/pci@9/SUNW,emlxs@0/fp@0,0/ssd@w5006048452a692a8,2b
    There are some hard errors in some disks. the capacity of c1t5006048452A692A8d0 and c1t5006048452A692A8d6 is 0G.
    #prtvtoc /dev/dsk/c1t5006048452A692A8d6
    * /dev/rdsk/c1t5006048452A692A8d6s2 partition map
    * Dimensions:
    * 512 bytes/sector
    * 128 sectors/track
    * 15 tracks/cylinder
    * 1920 sectors/cylinder
    * 3 cylinders
    * 1 accessible cylinders
    * Flags:
    * 1: unmountable
    * 10: read-only
    * First Sector Last
    * Partition Tag Flags Sector Count Sector Mount Directory
    2 5 01 0 1920 1919
    6 4 00 0 1920 1919
    Thank you for your help.

    Thank you for your reply。
    The Server is M5000.and the storage is EMC Stroage Array,I don't know the EMC Model type too。
    In some case (different machine such as V880),when we use a command “iostat -En”,it would show that there are some hard errors。
    but when we reboot the system,use "iostat -En" again 。the hard errors would be 0.
    But ,This Machine (M5000),it is running the very important application and i can't reboot it。
    Do you need a explorer data to analysis。
    thank you for your help。
    These disks shows that their capacity are 0 G.How can i to know if there are LUN or physical Disk。
    ssd0 Soft Errors: 0 Hard Errors: 3 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    ssd4 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    ssd5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: EMC Product: SYMMETRIX Revision: 5771 Serial No:
    Size: 0.00GB <1966080 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 0 Predictive Failure Analysis: 0
    root@EMOS3-DATABASE # vxprint -st
    Disk group: datadg
    SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE
    SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE
    SC NAME PLEX CACHE DISKOFFS LENGTH [COL/]OFF DEVICE MODE
    sd datadg01-01 rdbsys-01 datadg01 0 2097152 0 EMC0_0 ENA
    sd datadg01-02 rdbuser-01 datadg01 2097152 2097152 0 EMC0_0 ENA
    sd datadg01-03 eoms_db1-01 datadg01 4194304 13981056 2/0 EMC0_0 ENA
    sd datadg01-04 eoms_db2-01 datadg01 18175360 13981056 2/0 EMC0_0 ENA
    sd datadg01-05 eoms_db3-01 datadg01 32156416 13981056 2/0 EMC0_0 ENA
    sd datadg01-06 portal_db1-01 datadg01 46137472 13981056 2/0 EMC0_0 ENA
    sd datadg01-07 rctl1-01 datadg01 60118528 524288 0 EMC0_0 ENA
    sd datadg01-08 rdblog1-01 datadg01 60642816 1024000 0 EMC0_0 ENA
    sd datadg01-09 rdblog2a-01 datadg01 61666816 1024000 0 EMC0_0 ENA
    sd datadg01-10 rdblog3a-01 datadg01 62690816 1024000 0 EMC0_0 ENA
    sd datadg01-11 eoms_db4-01 datadg01 63714816 13981056 2/0 EMC0_0 ENA
    sd datadg01-12 eoms_db5-01 datadg01 77695872 10485760 3/0 EMC0_0 ENA
    sd datadg01-13 eoms_db6-01 datadg01 88181632 10485760 3/0 EMC0_0 ENA
    sd datadg01-14 eoms_db7-01 datadg01 98667392 10485760 3/0 EMC0_0 ENA
    sd datadg01-15 eoms_db8-01 datadg01 109153152 10485760 3/0 EMC0_0 ENA
    sd datadg01-16 eoms_db9-01 datadg01 119638912 10485760 3/0 EMC0_0 ENA
    sd datadg01-17 eoms_db10-01 datadg01 130124672 10485760 3/0 EMC0_0 ENA
    sd datadg02-01 rdbundo1-01 datadg02 0 2097152 0 EMC0_1 ENA
    sd datadg02-02 eoms_db1-01 datadg02 2097152 13981056 0/0 EMC0_1 ENA
    sd datadg02-03 eoms_db2-01 datadg02 16078208 13981056 0/0 EMC0_1 ENA
    sd datadg02-04 eoms_db3-01 datadg02 30059264 13981056 0/0 EMC0_1 ENA
    sd datadg02-05 portal_db1-01 datadg02 44040320 13981056 0/0 EMC0_1 ENA
    sd datadg02-06 rdbtmp-01 datadg02 58021376 2097152 0 EMC0_1 ENA
    sd datadg02-07 rctl2-01 datadg02 60118528 524288 0 EMC0_1 ENA
    sd datadg02-08 rdblog2-01 datadg02 60642816 1024000 0 EMC0_1 ENA
    sd datadg02-09 rdblog1a-01 datadg02 61666816 1024000 0 EMC0_1 ENA
    sd datadg02-10 rdblog3b-01 datadg02 62690816 1024000 0 EMC0_1 ENA
    sd datadg02-11 eoms_db5-01 datadg02 63714816 10485760 1/0 EMC0_1 ENA
    sd datadg02-12 eoms_db6-01 datadg02 74200576 10485760 1/0 EMC0_1 ENA
    sd datadg02-13 eoms_db7-01 datadg02 84686336 10485760 1/0 EMC0_1 ENA
    sd datadg02-14 eoms_db8-01 datadg02 95172096 10485760 1/0 EMC0_1 ENA
    sd datadg02-15 eoms_db9-01 datadg02 105657856 10485760 1/0 EMC0_1 ENA
    sd datadg02-16 eoms_db10-01 datadg02 116143616 10485760 1/0 EMC0_1 ENA
    sd datadg03-01 rdbsysaux-01 datadg03 0 2097152 0 EMC0_2 ENA
    sd datadg03-02 eoms_db1-01 datadg03 2097152 13981056 1/0 EMC0_2 ENA
    sd datadg03-03 eoms_db2-01 datadg03 16078208 13981056 1/0 EMC0_2 ENA
    sd datadg03-04 eoms_db3-01 datadg03 30059264 13981056 1/0 EMC0_2 ENA
    sd datadg03-05 portal_db1-01 datadg03 44040320 13981056 1/0 EMC0_2 ENA
    sd datadg03-06 rctl3-01 datadg03 58021376 524288 0 EMC0_2 ENA
    sd datadg03-07 rdblog3-01 datadg03 58545664 1024000 0 EMC0_2 ENA
    sd datadg03-08 rdblog1b-01 datadg03 59569664 1024000 0 EMC0_2 ENA
    sd datadg03-09 rdblog2b-01 datadg03 60593664 1024000 0 EMC0_2 ENA
    sd datadg03-10 eoms_db4-01 datadg03 61617664 13981056 1/0 EMC0_2 ENA
    sd datadg03-11 eoms_db5-01 datadg03 75598720 10485760 2/0 EMC0_2 ENA
    sd datadg03-12 eoms_db6-01 datadg03 86084480 10485760 2/0 EMC0_2 ENA
    sd datadg03-13 eoms_db7-01 datadg03 96570240 10485760 2/0 EMC0_2 ENA
    sd datadg03-14 eoms_db8-01 datadg03 107056000 10485760 2/0 EMC0_2 ENA
    sd datadg03-15 eoms_db9-01 datadg03 117541760 10485760 2/0 EMC0_2 ENA
    sd datadg03-16 eoms_db10-01 datadg03 128027520 10485760 2/0 EMC0_2 ENA
    sd datadg04-01 eoms_db4-01 datadg04 0 13981056 0/0 EMC0_3 ENA
    sd datadg04-02 eoms_db5-01 datadg04 13981056 10485760 0/0 EMC0_3 ENA
    sd datadg04-03 eoms_db6-01 datadg04 24466816 10485760 0/0 EMC0_3 ENA
    sd datadg04-04 eoms_db7-01 datadg04 34952576 10485760 0/0 EMC0_3 ENA
    sd datadg04-05 eoms_db8-01 datadg04 45438336 10485760 0/0 EMC0_3 ENA
    sd datadg04-06 eoms_db9-01 datadg04 55924096 10485760 0/0 EMC0_3 ENA
    sd datadg04-07 eoms_db10-01 datadg04 66409856 10485760 0/0 EMC0_3 ENA
    sd datadg05-01 portal_db2-01 datadg05 0 83886080 0/0 EMC0_4 ENA
    sd datadg06-01 portal_db2-01 datadg06 0 83886080 1/0 EMC0_5 ENA
    sd datadg07-01 portal_db2-01 datadg07 0 83886080 2/0 EMC0_6 ENA
    root@EMOS3-DATABASE # cfgadm -al
    Ap_Id Type Receptacle Occupant Condition
    SB0 System_Brd connected configured ok
    SB0::cpu0 cpu connected configured ok
    SB0::cpu1 cpu connected configured ok
    SB0::cpu2 cpu connected configured ok
    SB0::cpu3 cpu connected configured ok
    SB0::memory memory connected configured ok
    SB0::pci0 io connected configured ok
    SB0::pci1 io connected configured ok
    SB0::pci2 io connected configured ok
    SB0::pci3 io connected configured ok
    SB0::pci8 io connected configured ok
    SB1 disconnected unconfigured unknown
    SB2 disconnected unconfigured unknown
    SB3 disconnected unconfigured unknown
    SB4 disconnected unconfigured unknown
    SB5 disconnected unconfigured unknown
    SB6 disconnected unconfigured unknown
    SB7 disconnected unconfigured unknown
    SB8 disconnected unconfigured unknown
    SB9 disconnected unconfigured unknown
    SB10 disconnected unconfigured unknown
    SB11 disconnected unconfigured unknown
    SB12 disconnected unconfigured unknown
    SB13 disconnected unconfigured unknown
    SB14 disconnected unconfigured unknown
    SB15 disconnected unconfigured unknown
    c0 scsi-bus connected configured unknown
    c0::dsk/c0t0d0 disk connected configured unknown
    c0::dsk/c0t1d0 disk connected configured unknown
    c0::dsk/c0t3d0 CD-ROM connected configured unknown
    c0::sg/c0t0l0 unknown connected configured unknown
    c0::sg/c0t1l0 unknown connected configured unknown
    c0::sg/c0t3l0 unknown connected configured unknown
    c1 fc-fabric connected configured unknown
    c1::5006048452a692a8 disk connected configured unknown
    c2 fc connected unconfigured unknown
    iou#0-pci#0 unknown empty unconfigured unknown
    iou#0-pci#1 fibre/hp connected configured ok
    iou#0-pci#2 etherne/hp connected configured ok
    iou#0-pci#3 fibre/hp connected configured ok
    iou#0-pci#4 etherne/hp connected configured ok
    root@EMOS3-DATABASE # df -h
    Filesystem size used avail capacity Mounted on
    /dev/md/dsk/d0 9.9G 5.4G 4.4G 56% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 28G 1.9M 28G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    sharefs 0K 0K 0K 0% /etc/dfs/sharetab
    /dev/md/dsk/d3 9.9G 3.8G 5.9G 40% /usr
    fd 0K 0K 0K 0% /dev/fd
    /dev/md/dsk/d4 20G 2.2G 17G 12% /var
    swap 28G 3.1M 28G 1% /tmp
    swap 28G 88K 28G 1% /var/run
    swap 28G 0K 28G 0% /dev/vx/dmp
    swap 28G 0K 28G 0% /dev/vx/rdmp
    /dev/md/dsk/d5 59G 35G 24G 60% /opt
    /dev/md/dsk/d6 9.9G 139M 9.6G 2% /export/home
    /dev/vx/dsk/datadg/portal_db2
    120G 93G 25G 79% /opt/attachment
    /dev/vx/dsk/datadg/portal_db1
    20G 16G 3.9G 81% /tempattachment

  • HT1355 If I am playing a song from my phone on speakers, how can I make sure that there are no interruptions like calls or notifications?

    If I am playing a song from my phone on speakers, how can I make sure that there are no interruptions like calls or notifications? My students are performing and it would be terrible if there was to be an interruption.

    You could turn on Do Not Disturb. This would block all notifications and incoming calls.
    Or just turn you're phone's Airplane Mode on if you're not streaming the music

  • We have two company user,till now there are using same URL.but they wanted to access particular URL to related company user in single server

    Hi Experts,
    We have two company user,till now there are using same URL.but they wanted to access particular URL to related company user in single server.
    As per my knowledge ,it is possible through create new aliases with different URLs in network.
    But i dont how to create. Please help on this.
    Thanks in advance.
    Regards,
    Prasad

    Hi Prasad,
    Please explain in clear english as to what is your requirement. I got lost after "two company user" . I suppose it means there are users from two separate company: A and B. They were using same portal till now: http://commonportal:50000/irj/portal.
    Now they need different urls - specific for each company say companyAportal.com and companyBportal.com. But still the same old common portal in the end.
    If that's your requirement please search the forum with correct terms, else "Google".
    Thanks,

  • There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

    When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
    - When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed.  The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
    Requirements:
    There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
    ->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
      server to SAP R/3. The selection screen parameters would be:
      Logical Filename:
      Sales Organization:
      Distribution Channel:
      Division:
    ->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
      to SAP R/3. When this transaction is executed, it should not have the 'Logical
      Filename' parameter anymore on the selection-screen. Instead it should only have
      Local File name on the presentation server:
      Sales Organization:
      Distribution Channel:
      Division:
        The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
    is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
    Logical Filename:
    Sales Organization:
    Distribution Channel:
    Division:
    So how should I make these parameters invisible depending on the transaction codes execution.
    I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
    I have an idea of using SY-TCODE.
    EX:
    AT SELECTION-SCREEN OUTPUT.
    IF SY-TCODE = 'ZJPVCS303'.
    LOOP AT SCREEN.
    IF SCREEN-GROUPID = 'GRP'.
       SCREEN-INPUT   = 0.
       SCREEN-INVISIBLE = 1.
       MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ELSEIF SY-TCODE = 'ZJPVCS303_US'.
    LOOP AT SCREEN.
    IF .....
    ENDLOOP.
    ENDIF.
    ENDIF.
    But I am not able to get the output which I require. Please help me out.

    Hello Rani
    Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
    PARAMETERS:
      p_as_fil          TYPE filename   MODIF ID unx,  " e.g. Unix server
      p_pc_fil          TYPE filename   MODIF ID wnd.  " e.g. Windows PC
    AT SELECTION-SCREEN OUTPUT.
      CASE syst-tcode.
    *   transaction(s) for upload from server (AS)
        WHEN 'ZJPVCS303.
          LOOP AT screen.
            IF ( screen-group1 = 'UNX' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
    *   transaction(s) for upload from local PC (PC)
        WHEN 'ZJPVCS303_US.
          LOOP AT screen.
            IF ( screen-group1 = 'WND' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
       WHEN others.
       ENDCASE.
    Regards
      Uwe

  • Won't get juno mail messages says there are no new messages but there are.

    I installed Thunderbird for my multiple email accounts. Works fine with yahoo, aol, and Gmail. But, it will not get any messages from my web based Juno account. I've double checked all the settings (pop incoming, port 995, smpt outgoing, SSL encryption, etc.) and nothing works. I keep getting a message saying there are no new messages, but there are multiple new messages in the account. It does send.
    Thanks

    Thunderbird connects to mail providers using the POP and IMAP mail protocols. If the provider does not support these protocols (or blocks access to them for certain customers) then Thunderbird can not work with that provider.
    Have you followed these steps
    To begin getting Juno email on your phone or other email program, change your Juno email settings with these simple steps:
    1. Sign in to your Juno Email on the Web at webmail.juno.com
    2. Click on "Options" and select "General," or click on "Settings" and select "POP Mail" under "Preferences"
    3. Select "ON - POP my mail to my desktop/smartphone"
    4. Click "Save" to finish
    per http://www.emaildiscussions.com/showthread.php?t=63731

  • Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

    Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

    Sorry, 12.5mm high not 12.5" high!
    Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5mm high. Will they fit this model MacBook Pro?

  • My mac mail tells me there are 168 incoming messages but then only receives six

    My mac mail tells me there are 168 incoming messages but then only receives six
    I'm using the latest version of mail but not very good in dealing with computer problems.  My email supplier is Bt Internet.
    Can anyone help

    I have seen something similar once. A message on the mail server was corrupted and the download would never complete, but would always start the next time I launched Mail. It was the oldest message, so Mail always started with it, blocking all other mail. Deleting the file on the server was the solution. Don't know if that fits your situation. Good luck. BTW, I called my ISP's tech support and they watched the server's actions and could see that the file was not actually transferring. Give yours a call.

  • I can make individuals match to target areas (as there are tutorials for that) but i want each one

    hi in drag and drop  I can make individuals match to target areas (as there are tutorials for that) but i want each one to be able to slide in to any target area (and someday i want to create a solve button which will then place each element in the correct place).
    can any one help me with it

    I changed your mUp function to allow each movieclip to be placed on any target and to be reset to its original position if it is not on any target. I added the code for a button to position each movieclip to its correct target.
    import fl.transitions.Tween;
    import fl.transitions.easing.*;
    //Array to hold the target instances, the drop instances,
    //and the start positions of the drop instances.
    var hitArray:Array = new Array(hitTarget1,hitTarget2,hitTarget3);
    var dropArray:Array = new Array(drop1,drop2,drop3);
    var positionsArray:Array = new Array();
    //This adds the mouse down and up listener to the drop instances
    //and add the starting x and y positions of the drop instances
    //into the array.
    for (var i:int = 0; i < dropArray.length; i++)
              dropArray[i].buttonMode = true;
              dropArray[i].addEventListener(MouseEvent.MOUSE_DOWN, mdown);
              dropArray[i].addEventListener(MouseEvent.MOUSE_UP, mUp);
              positionsArray.push({xPos:dropArray[i].x, yPos:dropArray[i].y});
    //This drags the object that has been selected and moves it;
    //to the top of the display list. This means you can't drag
    //this object underneath anything.
    function mdown(e:MouseEvent):void
              e.currentTarget.startDrag();
              setChildIndex(MovieClip(e.currentTarget), numChildren - 1);
    //This stops the dragging of the selected object when the mouse is
    //released. If the object is dropped on the corresponding target
    //then it get set to the x and y position of the target. Otherwise
    //it returns to the original position.
    function mUp(e:MouseEvent):void
              var dropIndex:int = dropArray.indexOf(e.currentTarget);
              var target:MovieClip = e.currentTarget as MovieClip;
              target.stopDrag();
              for (var i:String in hitArray)
                        if (target.hitTestObject(hitArray[i]))
                                  target.x = hitArray[i].x;
                                  target.y = hitArray[i].y;
                                  return;
              target.x = positionsArray[dropIndex].xPos;
              target.y = positionsArray[dropIndex].yPos;
    // setRight is the instance name of the new button to reposition each
    // moveable movieclip to the correct target clip
    setRight.addEventListener(MouseEvent.MOUSE_UP,reset);
    // this function moves each movieclip to the correct target using a tween
    function reset(event:MouseEvent):void {
              for(var n:String in dropArray) {
              var myTweenX:Tween = new Tween(dropArray[n],"x",Strong.easeOut,dropArray[n].x,hitArray[n].x,3,true);
              var myTweenY:Tween = new Tween(dropArray[n],"y",Strong.easeOut,dropArray[n].y,hitArray[n].y,3,true);

  • Why can I sync some iTunes playlists to the iPod but some other ones don't?

    Why can I sync some iTunes playlists to the iPod but some other ones don't? This is unusual - I wonder if the iPod is working correctly but some setting is wrong. Thanks

    Connect your iPod to your computer and when it appears in the Source list click on it to show the preference tabs in the main pane. Go to the Music tab and check that your settings are "Sync Music - All songs and playlists" and not "Sync Music - Selected playlists"

  • I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to "Apple ID and Primary Email Address." But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

    I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

    You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a).  (@me.com addresses are no longer available as new addresses.)  Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
    Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost.  They are permanently tied to the original ID you used to purchase them.  You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud.

Maybe you are looking for

  • Trouble with quicklood on Max Os Lion 10.7.5

    I encounter mysterious crash on mac OS Lion 10.7.5 Here the report : Process:     quicklookd [24403] Path:        /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Contents /MacOS/quicklookd Identifier:  com.apple.QuickLookDaemo

  • XML in Java

    Is there an API to create xml document content or may be the xml format? I can do the same by using a StringBuffer and embedding my content between the custom tags. If possible I am looking for an elegant way to do the same, may be adding nodes to a

  • Connecting 8110 to a computer

    Hi, I my computer does not recognize, communicate to or charge my Pearl 8110.  My current Blackberry (7130c) is recognized and communicates and charges. When plugging in the new Blackberry (8110), it says "One of the USB devices attached has malfunct

  • Import Outlook contact groups into OSX Mail

    Is there any way to automatically import a contact group from Mac Outlook Express5 to Mail? An AppleScript possibly? The only alternative that I have seen is to copy/paste each individual email address from Outlook to a new group in Mail; one-at-a-ti

  • No Layout type in the properties tab ????...

    Hi Experts, I am creating a AIF in the Tr SFP, when I go to the properties tab there is no layout dropdown list available and when I try to activate the form its not allowing me to activate instead a message on the status bar "Action Cancelled by use