How is target id linked to component window
Hi,
I've created a Navigation Profile and a Work Center, that I wish to link to a Component Window via a logical link.
I need a target id to connect to the Component window. I created an inbound plug to the window but am not sure as to how to create the target id. Please let me how i need to create the target id and how to link to component window.
Thanks,
Urmila
Visit the following link it will help u to link the component.
http://wiki.sdn.sap.com/wiki/display/CRM/AddyourcustomBSPcomponentasalinkinaWork+Center
Similar Messages
-
How to set up Link Aggregation on Windows 7 ?
I am going to buy a new Switcher that is LACP (Link Aggregation Control Protocol) supported so I can get a little bit better internet by combining my two ethernet ports on my MacPro (Mid 2012) where i have Windows 7 Ultimate installed as well as Mac OSx. On Mac OSx it is easy to set up Link Aggregation takes only 30 sec by going to Manage Virtual Interfaces and click round (for doing this you need a Link Aggregation supported router or switcher), but on Windows it seems to be a little bit harder after looking around for a while now. Is there anyone here who knows how to do it or know if its possible to set up Link Aggregation on Windows 7 ?
I'll be thankful for any help i can gethehe I thought over that too
But since I dont got a windows forum account I thought of asking here fisrst -
How to open form links in new window in Acrobat XI
Does anyone know how to have a link within a form open a new instance of a browser?
Answered through email:
Hello,
I don´t understand your problem. You have not tried the component mentioned in my replies, right? You have tried Launch URL component from WD Native. Because if you have, you would ask such a question. This component is a u201Cgroupu201D of a text field and a button. That means, that fits your problem completely IMHO. Place the component on your form layout, Set the presence of the text fox inside this Launch URL and you will see what address is being launch when clicked on the button.
You said you have your address in the text field. So this is the same. Just change the source where the button takes the URL from or copy the value from your form into this one.
Hope this helps.
p.s.: looks like you have absolutely no exerience with JS coding.
That means you need to read first and code later, right? Start here: http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf -
How to open a link in a Window NOT a Tab in OS X Mountain Lion
For those of you who Hate having links open in tabs, especially when you have a window open and minimized to your doc. The link will take that
minimized window and use it to stick a tab in it and then open the link........WHAT A PAIN!
Here's how to avoid that problem and have the links open in a Brand New Window.
Safari/Preferences/Tabs
Uncheck both boxes
Now, the instructions below change to window instructions (not tab instructions)
See the little window to the right of: Opens pages in tabs instead of windows: Click the little arrows and select NEVER!
Now you have to insert a checkmark in the 1st box: (Butterfly) - click opens link in a new tab
The below instructions will revert back to tab instructions, Do Not Worry. All Is Good.
The fact that you have selected NEVER, means that NOW, the links will open in Brand New Windows! Yeah!!!
Close the Preference Window and click away.vveena123 wrote:
Hi everyone,
I immediately need help,plz help me.this is not the way to get help around here
try stating the problem professionally, without the assumption that your problem is important to others
I have a jsp which has a link that should open in a new window.
when the user clicks again the same link it should not open in another new window instead it should open the previous window.this has nothing to do with java or jsp
this is an html target question
testing
say if a user clicks the link 5 times it shud not open 5 windows instead only 1
Thanks in advanceuse target="new" i think -
How to find the entries of component windows?
Hello together!
I have a problem. I built up a new ui component with several windows and views. But there was an issue with one of my new windows. After creating a new one it was not displayed in the list of the component structure browser. So I decided to create it again. That was the fault, but the issue was the same - not displayed. So I closed all of my gui windows and opened a new one. After accessing to the component browser for my individual component via /nbsp_wd_cmpwb I got a dump!
ITAB_DUPLICATE_KEY
Now there are two entries with the same key.
So I want to find those entries in order to delete die second one, but where can I find it?
Thank you very much!
MarcusFixed it!
Found it with transaction SE80, BSP Appl 'MyBSP..'.
Deleted the line in the XML File.
Now it works fine! -
How to create navigational links...and connect views of another component
Hi...
I am new to SAP CRM...
I have a requirement where i need to navigate from the main window of a component to the view of a different component.
Scenario:
When i click on edit button after selecting a line item in the assignment block in the BT111H_OPPT/Details ,it should navigate to the details page of the line item which is the view of another component that has been created .say ZRP/PEL.
How can i achieve this using the concept of inbound/outbound plugs and navigational links?
I have got a vague idea on plugs from my search...that these are entry/exit points to views.
But what is the procedure to follow to attain the functionality?
How do we decide on which component needs which all plugs?
Anyhelpful pointers would be rewarded.
Also, an idea on what exactly does the inbound/outbound plugs do and how is the flow happening , how are navigational links working etc would be appreciated.
Thanks..Steps to create navigational link:
1. Create an outbound plug in the component from where you want to navigate. Sometimes
standard navigational links are already there.. you just need to identify it.
2. Create a Component usage in runtime repository for target component.
3. Add this component usage to the main window view in repository.
4. Create navigation link between the transaction type and the target component view.
5. In the outbound plug, use the view manager to navigate to the target component. Ex:
ME->FIRE_OUTBOUND_PLUG( IV_OUTBOUND_PLUG = 'TO_OUTPLUG''
IV_DATA_COLLECTION = LR_COL ).
6. Pass the data through the data collection. -
How to make a link page come up in seperate window
Am not sure how to make a link page to anther site for
insatance come up in seperate window so that they do not navigate
away from my site.Thanks TonySelect the item you want to use as a link. In the property
inspector, type
in the full path to the website you want to link to and set
the Target to
_blank.
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"chesterarebest" <[email protected]> wrote
in message
news:e88357$ifp$[email protected]..
> Am not sure how to make a link page to anther site for
insatance come up
> in seperate window so that they do not navigate away
from my site.Thanks
> Tony -
I am using the firefox 3.6. My problem is that I am using the web desktop and few web desktop based application directly opens link. If I click on rss link than it opens in same window, so no longer access to web desktop. I want to open any kind of link in new window instead of same window. I have tired to change the value of browser.link.open_newwindow, browser.link.open_newwindow.restriction but doesn't work. Also gone through the https://developer.mozilla.org/en/window.open but not sure where to do this in web desktop based application or firefox where we connect the web desktop?
Is there any way to open the link every time in new firefox window?Hi Joseph,
the HTMLB link object misses the support for onClientClick through the tag lib, see hbj:link without onClientClick ? and OnClientClick Event for Link HTMLB Component for similiar problems and workarounds.
With this workaround, you can call for example an AbstractPortalComponent, implement doOnNodeReady (with an empty doContent method) and return the PDF, settings the content type on the http before etc.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance! -
When I am searching the web and click on an item, I get a pop up window that contains 6 choices beginning with "open link in new window". Most of the time this a nuisance and I want to get rid of it, but it follows me all over the page and keeps popping up when I click on the same item again. If I don't want to use it, how can I make sure it doesn't reappear?
Also, another question. Firefox keeps asking me to upgrade to Firefox 3.6.19, but when I try, it will download. What gives? I have a Mac Pro with OSX version 10.6.7.
Thanks,
Lloyd Frohreich
[email protected]It sounds that you are opening the right-click context menu, maybe by pressing the mouse button for too long.
See:
* http://kb.mozillazine.org/ui.click_hold_context_menus -
How can i get a link to download windows storage server 2008 standard
how can i get a link to download windows storage server 2008 standard
Hi,
Please find the below link for storage server and its resources.
Windows storage server
Regards, Ravikumar P -
How do you open link to a file contained in a PDF portfolio in a new window?
I am making a large PDF portfolio with one main document that links to other documents contained inside the portfolio. The problem is when I select a link, it will take me to the document I would like it to but I cannot move back to the main document as easily as I would like to. Is there a fast "back" option, or can I set the link to open in a new window? I know I can move to the list view, hit the back button, re-open the main document, and find the same page again but that is not a very quick method.
I know how to set the link to open in a new window if I am opening a new file, but that option is not available if I would like to jump to a specific page contained within the document. I tried to "open a file" and select the portfolio but it won't allow me to set the page so that didn't work either. Any help or suggestions would be appreciated.
Thank you!Hi fmalek17,
Firstly, there is no such 'back' option in a portfolio. You might need to set a link in a similar way in the other document also for going back to the main document in a portfolio.
Secondly, you need to select 'Go to a page view' option in the Create Link window to jump to a specific page. Unfortunately, there is no such option available in Acrobat via which you can go to some specific page of the same document which gets opened in another window.
Regards,
Anubha -
With acrobat 7, how do I make links (within the pdf) open in a new window-tab?
With acrobat 7, how do I make links (within the pdf) open in a new window-tab?
No love? From anyone?
-
Please swap them back!
2 Solutions found in [http://support.mozilla.com/en-US/questions/791244]
the user cor-el has a method that does not require any add-ons. He States
This code in userChrome.css will move "Open Link in New Window" to the top of the context menu.
<pre>@namespace url("<a href="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul</a>"); /* only needed once */
#contentAreaContextMenu > * { -moz-box-ordinal-group: 2; }
#context-openlink { -moz-box-ordinal-group: 1 !important; }</pre>
the user jay_ff shows how to do it using the Menu Editor Add-on
1. Install the Menu Editor add-on from https://addons.mozilla.org/en-US/firefox/addon/menu-editor/ .
2. After the installation, go to Firefox> add-ons (or simply use Ctrl+Shift+A)
3. Go to the Menu Editor "Options"
4. In the "Main context menu," simply grab the "Open link in New Tab" and place it below the "Open Link in New Window"
5. and Voila! You may also change other menu options if you want to!
I tried jay_ff method first and found that indeed changing the Main Context Menu did cause the hotlink context menu to change as well. -
How share image and link in same post ?
You can
share a link and share an image (as an image or
as a file), but logically speaking all of the data types shared are considered different views of the same thing. The share target will pull out the best format for its target and leave the rest. The share source cannot tell the target how to interpret
the data.
See
Choosing data formats and file types.
If you want to combine multiple data types in one view then you can combine them in an HTML page. See
How to share HTML -
How to embed a link image with pop up windows?
Does anyone have any suggestions on how to embed a link
within flash movie? Once you click on it, it will pop up a new
window, but I want to disable the toolbars, status bar ..., and
only show the jpg image for this window.
Does anyone have any suggestions on how to do it in flash?
Thanks in advance for any suggestions
EricIf the Oracle Web Application you are talking about uses OAFramework then you can use personalization to add a link to the Ebiz suite page. But in order to fetch the userId and append it to the URL of the link you need to extend the controller in that page and set the destination of the link you had added in the controller. You have APIs on pageContext when you override the processRequest of the extended controller to fetch the userId. You can then create the URL by appending the userId and set it on the linkBean.
If you are new to OAF then you should read the devguide and personalization guide to get yourself familiarised with extending OAF application.
Maybe you are looking for
-
Alterar Conta do Razão no item de serviço do Pedido de Compras
Olá pessoal, estou precisando de uma ajuda. Estou precisando alterar o número da conta do razão na aba de classificação contábil para um item de serviço no pedido de compras. Tenho o seguinte cenário: foi desenvolvido um screen exit no item do pedido
-
Vendor ledger along with cheque and bank details
Dear Experts, I have one developement my client is asking he wants to vendor all items without cheque and bank details we will get thru fbl1n but my client is asking with cheque and bank details i know these detials are getting from bsak bsik and pay
-
How to create a specific calculation
Hi all I would like to create a calculation using the sales amount as measure and the geography as dimension The hierarchy of the geography is: ALL -Region --Country ---Store And the calculation I want is: Sales of a Country/ SUM(sales of its Region)
-
Hi all, I have a Select Statement and when there is no record returned by the select I have the following error : ORA-01403 NO DATA FOUND. Is there a parameter or something I can change to avoid this error to occure ? Any help will be appreciated. Ki
-
Report to see changes is HOLD Invoices
Hello, My client uses transaction MIRO to enter all the invoice information and then press pushbutton HOLD. Later he called transaction MIR6 to select Held Invoices, and If everything is all right POST the invoice. Sometimes he applied changes in Hol