How is the best way to backup and organize Adobe layered .PSD files on iMac OSX maverick?

How is the best way to organize and backup Adobe layered PSD files on iMac desktop OSX maverick?
I lost all my Adobe Photoshop files + everything else on my IMAC when it crashed. They reinstalled Operating System.  But now i must install programs such as MS Word & Adobe indesign suite.
Please help me determine what is the bestway to backup Adobe layered  PSD files? I believe these are my choices to be assured this doesn't ever hapen again. Please comment.
Buy Apple Airport Time capsule $280.  But I am not sure if it can store PSD layers. Can it or do you have to have Apple Apperture  software to act be sure layers are saved
I had had trouble getting Adobe Cloud to sync to save files and so just trusted my computer to not ever crash.  Any hints on this procedure
Are there any hints on PhotoShop image organization for a current IMac usser ?
Please help.
Teann  ucreateit

My backup plan is to use Time Machine to make a backup to an external disk drive plus I also do a clone of my system disk. So far between the bootable clone and the Time Machine backup this plan has covered all of my needs.
Allan

Similar Messages

  • The best way to backup and change the macbook pro drive in Lion

    Anyone knows how can i
    backup totally my macbook hard drive including :
    Macintosh HD + Recovery HD + Bootcamp partition
    Without loss of data
    and clone to a bigger Hard disk. (resizing Macintosh HD and Bootcamp Partitions to fit all the new Drive)

    djbabybokchoy wrote:
    Nothing specific, just speaking in general. Ex-wives, governments, bad guys...anyone really. I'm just looking to make my Mac a bit more private and secure, especially when on public networks.
    Governments and ex's will/may have recourse to the legal process (or in the case of the Gov they can choose to ignore the legal system if they feel like it) when they want to see something of yours, good luck hardening your Mac against that. The best way to avoid the possibility of snooping over public networks is to avoid them but if you can't then Kappy's suggestion will help.
    Strong passwords (everywhere) and don't use the same password in multiple locations.
    If you really want to secure your home wireless use Mac address connection authentication, do not allow unknown Mac addresses to connect. It's much stronger than a WPA password alone.

  • What is the best way to make and organize home videos? Macbook Pro? iPad?

    I have a Sony Handycam HD camcorder and a macbook pro.  Right now, I'm creating home videos by dumping all raw video into iMovie, adding a date/time stamp and saving the video to an external hard drive.  Is this the best way for me to create and store these home videos with my current setup?  I also take some video with my iPhone and include them in the iMovie projects as well.  I want these videos to be around for a long time and I'm afraid I'm going to lose them since I've graduated from DVDs to actual .mov files.
    With that said, I would like to find a more streamlined approach.  Idealy, I would love to replace my macbook pro with an iPad and use the iMovie app to process all of my home videos and then save to iCloud or an external hard drive.  Is this possible? 

    Deleting the application from your /Applications folder is sufficient. There are sample projects in /Library/Application/Aperture you may want to get rid of as well, as they take up a fair bit of space.

  • What is the best way to get PATHS from one Photoshop psd file to another?

    Hi! New on the site, and I signed up specifically to ask the best way to import one .psd file into another, including the paths on the paths palette.
    Almost all of my Photoshop drawings make heavy use of vector paths, which I then stroke using using PS natural-media brushes and the "stroke paths" function (usually with "simulate pressure" checked.) Also, my .psd files tend to be, um, HUGE... and I typically break up a whole drawing into separate PS files and then assemble all of them into one final finished graphic.
    I have no trouble moving raster stuff from file to file. Just put all the layers I want to transfer into a group and drag the group to the other .psd. Works fine, including layer masks. But I have not found a good way to get vector paths from the Paths palette of one .psd to another. Of course I can select paths and copy them to the Win clipboard, switch to the other .psd, and paste them back in. The drawback to that method is that I lose the correct size relation between the results of previously done "stroke paths" operations (on raster layers) and the paths that generated them. Sometimes the copied-in paths are way too large, sometimes way too small, never Just Right.
    As I'm sure most of you know, if you resize an entire Photoshop document from within PS, any paths it contains are correctly resized along with everything else. That's no longer true after grouped raster layers are dragged over to another document but paths are copied and pasted in. The size connection is lost. (Location placement, too.)
    I WANT those paths! After I bring a piece of a drawing into the full final drawing, what looked good when I was working on it separately often doesn't look right any longer and I want to re-stroke those paths using different brush diameter, opacity, etc., or maybe even a completely different brush.
    I've tried bring outside .psd files in as smart objects with the Place command but either that doesn't work or I'm not doing it right. Using Place, the paths in the Placed document don't come in at all.
    I'll be very grateful for any hints or strategies any of you knowledgeable folks can give me. Thanks very much!
    Jim
    Note, PS CS3 extended on Win 7 pro.

    Denny
    1. Connect the two macs - firewire, ethernet, sneakernet as suits you - and copy the iPhoto Library Folder from Old Machine to New Machine. Drag it from Home/Pictures to the same location on the new machine.
    2. Because all the files 'belong' to the account on the old machine, you have to update the file permissions: hence Download BatchMod from
    http://macchampion.com/arbysoft/
    And apply it to the iPhoto Library Folder using the settings found here:
    http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
    (Credit to Old Toad for this one).
    Note: This must be run on the new machine after copying the files over.
    3. Then launch iPhoto on the new machine.
    Regards
    TD

  • What is the best way to save and share Captivate software simulation files in Connect?

    File sizes (of 9mb zipped) appear to be causing problems. I've tried to share this short video any number of ways and I have not been successful.

    Thank you. I have tried publishing directly to Connect and many other ways. I was able to upload a ppt converted SWF, so I know I can do it, but I'm not doing something correcly with the simulation, and I'm not sure what. I can add the file to my Content and it appears to want to upload in Connect, but I just get the wait screen and no controls to play the file. I've also aggregated the ppt SWF and the simulation SWF, and it won't recognize this either. I'm close, but I'm just missing something.

  • My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

    My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

    Have a look here...
    what-to-do-when-your-hard-drive-is-full.html

  • I have an iphone4s and my two daughters have an iPod each. They both have used my apple id. How is the best way to change our their ids as I have been told we all need separate ids to be able to message each

    I have an iPhone and my two daughters both have iPods. They both use my apple Id and I would like to change their Id. . How is the best way to do this? My younger daughter had her iPod only last week and when she set it up, she ended up with all my phone contacts on Her iPod. If I change her apple Id will this remove the contacts from her iPod and leave mine intact on my phone?

    Anyone...anyone? Bueller...Bueller?

  • What's the best way to backup DFS using DPM 2010?

    We setup DFS on two Windows 2012 R2 and they are hosting files. What’s the best way to backup DFS using DPM 2010?
    1. When doing data backup, do we backup both dfs01 and dfs02? Or just backup one of them?
    2. Beside the data, what do we need to backup?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    Protecting Data in DFS Namespaces
    Backup files and BRM of dfs01 and dfs2 for minimaze traffic.
    If dfs01 and dfs02 have good channel width that use DPM to only protect a single “copy” of the data located on a server-specific local path.
    Data Protection Manager 2010 Protection Best Practices
    Have a nice day !!!

  • What is the best way to store and search 2D data

    Hi,
    There is a set of data (~10k records ) in 2D dimension.
    like this :
    Col 1, Col 2, Col3....
    What is the best way to store and search those records ?
    Thanks in advance
    Wilson

    Hi,
    Either userObjet[][] if you know how much data you have, and the data size is fixed, or use a list of lists. E.g. A Vector of Vectors (some will probably say that you should use an ArrayList instead, and that could be the case, but it sounds like you would want to display the data later on, and a DefaultTableModel (for JTables) uses a Vector as data holder).
    Kaj

  • How is the best way to send data from local database into remote database ?

    Hi all,
    I need to send data from local Oracle database into remote oracle database. Both sites connected via 128 kbps frame relay connection.
    The sending need to be done once a week, can be done nightly.
    How is the best way to do this ?
    Thank you very much,
    xtanto

    How is the best way to do this ?How much are you planning to send?
    You can use COPY command. Ensure that you have valid database link between two databases.
    Available options are:
    create - creates a new table. errors out if the destination table exists.
    replace - drop the destination table and re-creates with data.
    insert - inserts data if the destination table exists.
    append– appends data into an existing table.
    use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
    copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp;

  • How is the best way to manage the stats table?

    Hello!
    I have the Integration 2.1 working with an Oracle 8.1.7 db. I noticed that the table
    STATS is growing pretty fast.
    How is the best way to manage this table?... I haven't found something related with
    this issue in the documentation, but at least I want to know how to safely delete
    records from this table.
    For example, if I know the minimal time I have to keep in the table, is quite simple
    to create a shell script and/or Oracle pl/sql job to trim the table.
    I hope somebody can help me!!!!
    Thank you!
    Ulises Sandoval

    Write an app people want to buy and rate highly.

  • How is the best way to remove something from a photo?

    How is the best way to remove something from a photo?

    This is difficult to answer without fully knowing what you are trying to do.
    That said, a few excellent and user friendly retouching tools include:  The Spot Heealing Brush Tool, Healing Brush Tool, Patch Tool, and the Cloning Stamp Tool.

  • How is the best way to have Itunes notice your app or drive traffic to the app store?

    How is the best way to have Itunes notice your app or drive traffic to the app store? What are the best ways based on experiance that works to drive traffic to your app as a paid game for .99?

    Write an app people want to buy and rate highly.

  • I need to install Internet Explorer 6 or greater on my iMac to work with a program.  How is the best way to do that?

    I need to install Internet Explorer 6 or greater on my iMac (intel processor) running MacOS 10.6.8 to work with a program.  How is the best way to accomplish this?

    There is no way.  IE has not been available for the Mac for years now.
    Your only option is to install native Windows and use that - either through a bootcamp dual-boot scenario, or use a virtual machine to run windows in (eg. Parallels or VMWare Fusion).  Either way, you will need a full retail install disk for Windows.
    P.S. the last version of IE for Mac was for PPC machines, and it was discontinued in 2003.

  • Hi how is the best way to do a " format " to the disc???

    I have a Macbook Pro for 3 years now, never ever did a "format to the disck" or other kind of re-instaling apple software! Now the Mac its more slow and saying that no have memori space. I want to delete everying and re-install again ( had a TimeMachine update ).
    How is the best way to do it?
    Thanks

    I don't do J2ME, but the best way I've run across is offscreen rendering and javax.swing.Timer
    If there is an equivalent in J2ME I highly recommend it.

Maybe you are looking for

  • Passing parameters dynamically to crystal report from oracle

    Hi, I have a Crystal Report that is based on an Oracle Stored Procedure. This was created using Crystal Reports XI R2 and it is published on a Infoview environment. There are 2 parameteres in  an Oracle Stored Procedure, of which one parameter is Reg

  • Transaction - using XA-Resource

    Hi, We are trying to achieve transactionality in message processing using XAResource. We have a Foreign JMS server(MQ based) from were the messages are picked up by a singleton service, passed to an OSB service where it is processed. If any exception

  • Major color/saturation issues in dvd authoring

    hi. we've just finished color correction for our indie film, and looking at the digi-beta master on a pro-ntsc monitor- it looks great. but, the dvd's look terrible. there has been a lot of yellow added to warm up the picture. so on the master, the y

  • Permissions issue causing error when copying digital copy to iTunes.

    Hello. I have recently built a new wondiws computer. (I came from a mac, don't ask). I downloaded iTunes, I have put all of my music in there and synced up my phone and some of my digital copies from blu-rays. Suddenly (only a day later) I am unable

  • Safari search bar searches google russia

    I have just had a problem with safari. When I use the search bar it searches using google russia. I have solved the problem by resetting safari but I wanted to know what causes this and specifically is it a security issue.